Re: Filesystem lockup with CONFIG_PREEMPT_RT

[Austin Schuh]

On Tue, May 13, 2014 at 7:29 PM, Austin Schuh <austin@xxxxxxxxxxxxxxxx> wrote:
> Hi,
>
> I am observing a filesystem lockup with XFS on a CONFIG_PREEMPT_RT
> patched kernel.  I have currently only triggered it using dpkg.  Dave
> Chinner on the XFS mailing list suggested that it was a rt-kernel
> workqueue issue as opposed to a XFS problem after looking at the
> kernel messages.
>
> The only modification to the kernel besides the RT patch is that I
> have applied tglx's "genirq: Sanitize spurious interrupt detection of
> threaded irqs" patch.

I upgraded to 3.14.3-rt4, and the problem still persists.

I turned on event tracing and tracked it down further.  I'm able to
lock it up by scping a new kernel debian package to /tmp/ on the
machine.  scp is locking the inode, and then scheduling
xfs_bmapi_allocate_worker in the work queue.  The work then never gets
run.  The kworkers then lock up waiting for the inode lock.

Here are the relevant events from the trace.  ffff8803e9f10288
(blk_delay_work) gets run later on in the trace, but ffff8803b4c158d0
(xfs_bmapi_allocate_worker) never does.  The kernel then warns about
blocked tasks 120 seconds later.


             scp-5393  [001] ....1..   148.883383: xfs_writepage: dev
8:5 ino 0xd8e pgoff 0x4a3e000 size 0x16af02b0 offset 0 length 0
delalloc 1 unwritten 0
             scp-5393  [001] ....1..   148.883383: xfs_ilock_nowait:
dev 8:5 ino 0xd8e flags ILOCK_SHARED caller xfs_map_blocks
             scp-5393  [001] ....1..   148.883384: xfs_iunlock: dev
8:5 ino 0xd8e flags ILOCK_SHARED caller xfs_map_blocks
             scp-5393  [001] ....1..   148.883386: xfs_log_reserve:
dev 8:5 type STRAT_WRITE t_ocnt 2 t_cnt 2 t_curr_res 112332 t_unit_res
112332 t_flags XLOG_TIC_INITED|XLOG_TIC_PERM_RESERV reserveq empty
writeq empty grant_reserve_cycle 57 grant_reserve_bytes 9250852
grant_write_cycle 57 grant_write_bytes 9250852 curr_cycle 57
curr_block 18031 tail_cycle 57 tail_block 17993
             scp-5393  [001] ....1..   148.883386:
xfs_log_reserve_exit: dev 8:5 type STRAT_WRITE t_ocnt 2 t_cnt 2
t_curr_res 112332 t_unit_res 112332 t_flags
XLOG_TIC_INITED|XLOG_TIC_PERM_RESERV reserveq empty writeq empty
grant_reserve_cycle 57 grant_reserve_bytes 9475516 grant_write_cycle
57 grant_write_bytes 9475516 curr_cycle 57 curr_block 18031 tail_cycle
57 tail_block 17993
             scp-5393  [001] ....1..   148.883386: xfs_ilock: dev 8:5
ino 0xd8e flags ILOCK_EXCL caller xfs_iomap_write_allocate
             scp-5393  [001] ....1.3   148.883390:
workqueue_queue_work: work struct=ffff8803b4c158d0
function=xfs_bmapi_allocate_worker workqueue=ffff8803ea85dc00
req_cpu=512 cpu=1
             scp-5393  [001] ....1.3   148.883390:
workqueue_activate_work: work struct ffff8803b4c158d0
             scp-5393  [001] ....1.4   148.883396:
workqueue_queue_work: work struct=ffff8803e9f10288
function=blk_delay_work workqueue=ffff8803ecf96200 req_cpu=512 cpu=1
             scp-5393  [001] ....1.4   148.883396:
workqueue_activate_work: work struct ffff8803e9f10288
             scp-5393  [001] dN..3.4   148.883399: sched_wakeup:
comm=kworker/1:1H pid=573 prio=100 success=1 target_cpu=001
             scp-5393  [001] dN..3.4   148.883400: sched_stat_runtime:
comm=scp pid=5393 runtime=32683 [ns] vruntime=658862317 [ns]
             scp-5393  [001] d...3.4   148.883400: sched_switch:
prev_comm=scp prev_pid=5393 prev_prio=120 prev_state=R+ ==>
next_comm=kworker/1:1H next_pid=573 next_prio=100

    irq/44-ahci-273   [000] d...3.5   148.883647: sched_wakeup:
comm=kworker/0:2 pid=732 prio=120 success=1 target_cpu=000
    irq/44-ahci-273   [000] d...3..   148.883667: sched_switch:
prev_comm=irq/44-ahci prev_pid=273 prev_prio=49 prev_state=S ==>
next_comm=kworker/0:2 next_pid=732 next_prio=120
    kworker/0:2-732   [000] ....1..   148.883674:
workqueue_execute_start: work struct ffff8800aea30cb8: function
xfs_end_io
    kworker/0:2-732   [000] ....1..   148.883674: xfs_ilock: dev 8:5
ino 0xd8e flags ILOCK_EXCL caller xfs_setfilesize
    kworker/0:2-732   [000] d...3..   148.883677: sched_stat_runtime:
comm=kworker/0:2 pid=732 runtime=11392 [ns] vruntime=46907654869 [ns]
    kworker/0:2-732   [000] d...3..   148.883679: sched_switch:
prev_comm=kworker/0:2 prev_pid=732 prev_prio=120 prev_state=D ==>
next_comm=swapper/0 next_pid=0 next_prio=120

   kworker/1:1-99    [001] ....1..   148.884208:
workqueue_execute_start: work struct ffff8800aea30c20: function
xfs_end_io
    kworker/1:1-99    [001] ....1..   148.884208: xfs_ilock: dev 8:5
ino 0xd8e flags ILOCK_EXCL caller xfs_setfilesize
    kworker/1:1-99    [001] d...3..   148.884210: sched_stat_runtime:
comm=kworker/1:1 pid=99 runtime=36705 [ns] vruntime=48354424724 [ns]
    kworker/1:1-99    [001] d...3..   148.884211: sched_switch:
prev_comm=kworker/1:1 prev_pid=99 prev_prio=120 prev_state=R+ ==>
next_comm=swapper/1 next_pid=0 next_prio=120

  kworker/u16:4-296   [001] ....1..   151.560358:
workqueue_execute_start: work struct ffff8803e9f10660: function
bdi_writeback_workfn
  kworker/u16:4-296   [001] ....1..   151.560389:
workqueue_execute_end: work struct ffff8803e9f10660
  kworker/u16:4-296   [001] d...3..   151.560398: sched_stat_runtime:
comm=kworker/u16:4 pid=296 runtime=51174 [ns] vruntime=48345513312
[ns]
  kworker/u16:4-296   [001] d...3..   151.560403: sched_switch:
prev_comm=kworker/u16:4 prev_pid=296 prev_prio=120 prev_state=R+ ==>
next_comm=swapper/1 next_pid=0 next_prio=120


I have a peak_pci can card in the machine that is consuming about 1.5
CPU cores because it is not connected to a CAN bus and gets error
interrupts every time it tries to send and resend.  If I disable the
card (ifconfig can0 down; ifconfig can1 down), I have a lot more
trouble reproducing the lockup.

Any ideas why the scheduled work is never getting run?

Thanks,
Austin
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/