of_phy_connect_fixed_link() is becoming obsolete, and also required
platform code to register the fixed PHYs at the specified addresses for
those to be usable. Get rid of it and use the new of_phy_is_fixed_link()
plus of_phy_register_fixed_link() helpers to transition over the new
scheme.
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
drivers/net/ethernet/broadcom/bcmsysport.c | 17 +++++++++++++++--
drivers/net/ethernet/broadcom/bcmsysport.h | 1 +
2 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index d40c5b969e9e..dc708a888f80 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -1327,8 +1327,8 @@ static int bcm_sysport_open(struct net_device *dev)
/* Read CRC forward */
priv->crc_fwd = !!(umac_readl(priv, UMAC_CMD) & CMD_CRC_FWD);
- priv->phydev = of_phy_connect_fixed_link(dev, bcm_sysport_adj_link,
- priv->phy_interface);
+ priv->phydev = of_phy_connect(dev, priv->phy_dn, bcm_sysport_adj_link,
+ 0, priv->phy_interface);