Re: [PATCH 3/4] clk: samsung: Add driver to control CLKOUT line on Exynos SoCs

[Tushar Behera]

On 05/20/2014 10:13 PM, Tomasz Figa wrote:
> This patch introduces a driver that handles configuration of CLKOUT pin
> of Exynos SoCs that can be used to output certain clocks from inside of
> the SoC to a dedicated output pin.
> 
> Signed-off-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/arm/samsung/pmu.txt        |  30 ++++
>  drivers/clk/samsung/Makefile                       |   1 +
>  drivers/clk/samsung/clk-exynos-clkout.c            | 153 +++++++++++++++++++++
>  3 files changed, 184 insertions(+)
>  create mode 100644 drivers/clk/samsung/clk-exynos-clkout.c
> 

[ ... ]

> +	clkout->clk_table[0] = clk_register_composite(NULL, "clkout",
> +				parent_names, parent_count, &clkout->mux.hw,
> +				&clk_mux_ops, NULL, NULL, &clkout->gate.hw,
> +				&clk_gate_ops, CLK_SET_RATE_PARENT
> +				| CLK_SET_RATE_NO_REPARENT);

Would you please remove CLK_SET_RATE_NO_REPARENT flag from here? Let me
know if you have reservations against this.

With RFC patches, I am able to do a clk_set_rate() on this clock to
get a 24MHz output to the codec clock. With this flag set, I again have
to rely on the default value set to this register in bootloader.

-- 
Tushar Behera
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/