Re: [PATCH] i2c: davinci: Add block read functionality for IPMI

[Sekhar Nori]

On Friday 02 May 2014 12:19 AM, Murali Karicheri wrote:
> Intelligent Plaform Management Interface (IPMI) requires I2C driver
> to support block read, where the first byte received from slave is
> the length of following data:-
>  Added length check if the read type is block read (I2C_M_RECV_LEN)
>  Send NACK/STOP bits before last byte is received
> 
> Signed-off-by: Garrett Ding <g-ding@xxxxxx>
> Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx>

I tested this on a DA850 using i2cdetect and it did not seem to break 
anything so:

Tested-by: Sekhar Nori <nsekhar@xxxxxx>

There are some checks that were triggered in checkpatch. You may want 
to fix them up.

Thanks,
Sekhar

CHECK: Alignment should match open parenthesis
#112: FILE: drivers/i2c/busses/i2c-davinci.c:557:
+					w = davinci_i2c_read_reg(dev,
+							DAVINCI_I2C_MDR_REG);

CHECK: Alignment should match open parenthesis
#115: FILE: drivers/i2c/busses/i2c-davinci.c:560:
+					davinci_i2c_write_reg(dev,
+							DAVINCI_I2C_MDR_REG, w);

CHECK: Alignment should match open parenthesis
#119: FILE: drivers/i2c/busses/i2c-davinci.c:564:
+					davinci_i2c_write_reg(dev,
+							DAVINCI_I2C_MDR_REG, w);

total: 0 errors, 0 warnings, 3 checks, 67 lines checked

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/