Re: [PATCH 3/4] clk: samsung: Add driver to control CLKOUT line on Exynos SoCs

[Tushar Behera]

On 22 May 2014 16:04, Tomasz Figa <t.figa@xxxxxxxxxxx> wrote:
> On 22.05.2014 07:13, Tushar Behera wrote:
>> On 05/20/2014 10:13 PM, Tomasz Figa wrote:
>>> This patch introduces a driver that handles configuration of CLKOUT pin
>>> of Exynos SoCs that can be used to output certain clocks from inside of
>>> the SoC to a dedicated output pin.
>>>
>>> Signed-off-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
>>> ---
>>>  .../devicetree/bindings/arm/samsung/pmu.txt        |  30 ++++
>>>  drivers/clk/samsung/Makefile                       |   1 +
>>>  drivers/clk/samsung/clk-exynos-clkout.c            | 153 +++++++++++++++++++++
>>>  3 files changed, 184 insertions(+)
>>>  create mode 100644 drivers/clk/samsung/clk-exynos-clkout.c
>>>
>>
>> [ ... ]
>>
>>> +    clkout->clk_table[0] = clk_register_composite(NULL, "clkout",
>>> +                            parent_names, parent_count, &clkout->mux.hw,
>>> +                            &clk_mux_ops, NULL, NULL, &clkout->gate.hw,
>>> +                            &clk_gate_ops, CLK_SET_RATE_PARENT
>>> +                            | CLK_SET_RATE_NO_REPARENT);
>>
>> Would you please remove CLK_SET_RATE_NO_REPARENT flag from here? Let me
>> know if you have reservations against this.
>
> The problem with clock reparenting is that there are certain parent
> clocks of CLKOUT, rate of which changes at runtime, e.g. clocks derived
> from APLL or bus clocks, which can be reconfigured by cpufreq or devfreq.
>

+CC: Sylwester Nawrocki

Okay. But in cases where there is only 1 valid parent clock provided
through DT (at the moment for Exynos5250/Exynos5420), would it be safe
to set that clock as the parent of CLKOUT? Otherwise, this clock is
not usable ATM.

>>
>> With RFC patches, I am able to do a clk_set_rate() on this clock to
>> get a 24MHz output to the codec clock. With this flag set, I again have
>> to rely on the default value set to this register in bootloader.
>>
>
> This problem should be handled by initializing clocks from DT. I'm not
> sure why it hasn't been implemented yet...

I would be happy to get it done that way. I can see a patch from
Sylwester regarding this, but there hasn't been a conclusion as of
yet.

https://lkml.org/lkml/2014/4/9/173

Thanks,
-- 
Tushar Behera
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/