Re: [PATCH 3/4] clk: samsung: Add driver to control CLKOUT line on Exynos SoCs

[Sylwester Nawrocki]

On 22/05/14 14:01, Tomasz Figa wrote:
>>>> >>> [ ... ]
>>>> >>>
>>>>> >>>> +    clkout->clk_table[0] = clk_register_composite(NULL, "clkout",
>>>>> >>>> +                            parent_names, parent_count, &clkout->mux.hw,
>>>>> >>>> +                            &clk_mux_ops, NULL, NULL, &clkout->gate.hw,
>>>>> >>>> +                            &clk_gate_ops, CLK_SET_RATE_PARENT
>>>>> >>>> +                            | CLK_SET_RATE_NO_REPARENT);
>>>> >>>
>>>> >>> Would you please remove CLK_SET_RATE_NO_REPARENT flag from here? Let me
>>>> >>> know if you have reservations against this.
>>> >>
>>> >> The problem with clock reparenting is that there are certain parent
>>> >> clocks of CLKOUT, rate of which changes at runtime, e.g. clocks derived
>>> >> from APLL or bus clocks, which can be reconfigured by cpufreq or devfreq.
>>> >>
>> > 
>> > +CC: Sylwester Nawrocki
>> > 
>> > Okay. But in cases where there is only 1 valid parent clock provided
>> > through DT (at the moment for Exynos5250/Exynos5420), would it be safe
>> > to set that clock as the parent of CLKOUT?
>
> This is not something to rely on. I have simply omitted remaining CLKOUT
> parents on Exynos 5 SoCs, as I don't have any board with them on which I
> could test this. Eventually they will be added.
> 
>> > Otherwise, this clock is
>> > not usable ATM.
>
> On many boards it is already configured properly by the bootloader.
> Although I don't see any reason why you couldn't reparent it in
> (board-specific) sound card driver right now.

This would require passing the parent's clock specifier in 'clocks'
property of the sound card device node, which I assume is not something
we're generally expected to do in mainline. Although some drivers
happen to be doing it already I think that's a bad example. It sounds
like an abuse of the current clock bindings.

--
Regards,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/