Re: [PATCH 4/5] usb: host: xhci-plat: add optional PHY support

From: Kishon Vijay Abraham I
Date: Fri May 23 2014 - 05:29:48 EST


Hi,

On Friday 16 May 2014 09:52 PM, Gregory CLEMENT wrote:
> This commit extends the xhci-plat so that it can optionally be passed
> a reference to a PHY through the Device Tree. It will be useful for
> the Armada 375 SoCs. If no PHY is provided then the behavior of the
> driver is unchanged.
>
> As for the clock, to achieve this, it adds a 'struct phy *' member in
> xhci_hcd. While only used for now in xhci-plat, here again, it might
> be used by other drivers in the future.
>
> Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
> ---
> drivers/usb/host/xhci-plat.c | 29 ++++++++++++++++++++++++++++-
> drivers/usb/host/xhci.h | 2 ++
> 2 files changed, 30 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index 0f5f4c8f5bf6..34239b582621 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -15,6 +15,7 @@
> #include <linux/dma-mapping.h>
> #include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> @@ -94,6 +95,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
> struct resource *res;
> struct usb_hcd *hcd;
> struct clk *clk;
> + struct phy *phy;
> int ret;
> int irq;
>
> @@ -160,9 +162,23 @@ static int xhci_plat_probe(struct platform_device *pdev)
> goto unmap_registers;
> }
>
> + phy = devm_phy_optional_get(&pdev->dev, "usb");
> + if (IS_ERR(phy)) {
> + ret = PTR_ERR(phy);
> + goto disable_clk;
> + } else {
> + ret = phy_init(phy);
> + if (ret)
> + goto disable_phy;

I think you meant disable_clk here?
> +
> + ret = phy_power_on(phy);
> + if (ret)
> + goto disable_phy;
> + }
> +
> ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
> if (ret)
> - goto disable_clk;
> + goto power_off_phy;
>
> device_wakeup_enable(hcd->self.controller);
>
> @@ -198,6 +214,12 @@ put_usb3_hcd:
> dealloc_usb2_hcd:
> usb_remove_hcd(hcd);
>
> +power_off_phy:
> + if (!IS_ERR(phy))

This check is unnecessary here since you do power_off only if PHY is not error.
> + phy_power_off(phy);
> +disable_phy:
> + if (!IS_ERR(phy))

same here..
> + phy_exit(phy);
> disable_clk:
> if (!IS_ERR(clk))
> clk_disable_unprepare(clk);
> @@ -219,6 +241,7 @@ static int xhci_plat_remove(struct platform_device *dev)
> struct usb_hcd *hcd = platform_get_drvdata(dev);
> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> struct clk *clk = xhci->clk;
> + struct phy *phy = xhci->phy;
>
> usb_remove_hcd(xhci->shared_hcd);
> usb_put_hcd(xhci->shared_hcd);
> @@ -226,6 +249,10 @@ static int xhci_plat_remove(struct platform_device *dev)
> usb_remove_hcd(hcd);
> if (!IS_ERR(clk))
> clk_disable_unprepare(clk);
> + if (!IS_ERR(phy)) {

same here..

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/