[Patch v7 0/7] Introduce keystone reset driver
From: Ivan Khoronzhuk
Date: Fri May 23 2014 - 11:45:00 EST
These patches introduce keystone reset driver.
The keystone SoC can be rebooted in several ways. By external reset
pin, by soft and by watchdogs. This driver allows software reset and reset
by one of the watchdogs. Also added opportunity to set soft/hard reset type.
Based on linux-next/master
v7..v6
power: reset: keystone-reset: introduce keystone reset driver
power: reset: add bindings for keystone reset driver
ARM: dts: keystone: update reset node to work with reset driver
- s/wdt_list/wdt-list/g
v6..v5
clock: keystone-pllctrl: add bindings for keystone pll controller
mfd: ti-keystone-devctrl: add bindings for device state control
power: reset: add bindings for keystone reset driver
ARM: dts: keystone: update reset node to work with reset driver
- for nodes s/device-state-control/device-state-control@02620000/g
- for nodes s/pll-controller/pll-controller@02310000/g
mfd: ti-keystone-devctrl: add bindings for device state control
- corrected description for reg property
v5..v4
power: reset: keystone-reset: introduce keystone reset driver
- changed to get rsmux and rspll offsets from DT
clock: keystone-pllctrl: add bindings for keystone pll controller
- new patch
mfd: ti-keystone-devctrl: add bindings for device state control
- new patch
power: reset: add bindings for keystone reset driver
- corrected description of "ti,syscon-pll", "ti,syscon-dev" properties
- corrected examples
ARM: dts: keystone: update reset node to work with reset driver
- added nodes for pll-controller and device-state-controll
- added offsets to "ti,syscon-pll", "ti,syscon-dev" properties
v4..v3
Power: reset: keystone-reset: introduce keystone reset driver
- changed to use syscon framework
- changed to use regmap to access registers
Power: reset: add bindings for keystone reset driver
- deleted properties "reg", "reg-names"
- added properties "ti,syscon-pll", "ti,syscon-dev"
ARM: dts: keystone: update reset node to work with reset driver
- deleted properties "reg", "reg-names"
- added properties "ti,syscon-pll", "ti,syscon-dev"
v2..v3
Power: reset: keystone-reset: introduce keystone reset driver
- no functional changes, only sanity
Power: reset: add bindings for keystone reset driver
- corrected WDT numeration in examples
- extended description of wdt_list property
v1..v2
- re based on v3.15-rc1 without changes
Ivan Khoronzhuk (7):
power: reset: keystone-reset: introduce keystone reset driver
clock: keystone-pllctrl: add bindings for keystone pll controller
mfd: ti-keystone-devctrl: add bindings for device state control
power: reset: add bindings for keystone reset driver
ARM: keystone: remove redundant reset stuff
ARM: dts: keystone: update reset node to work with reset driver
ARM: keystone: enable reset driver support
.../bindings/clock/ti-keystone-pllctrl.txt | 20 +++
.../bindings/mfd/ti-keystone-devctrl.txt | 19 +++
.../bindings/power/reset/keystone-reset.txt | 67 +++++++++
arch/arm/boot/dts/keystone.dtsi | 14 +-
arch/arm/configs/keystone_defconfig | 3 +
arch/arm/mach-keystone/keystone.c | 34 -----
drivers/power/reset/Kconfig | 8 +
drivers/power/reset/Makefile | 1 +
drivers/power/reset/keystone-reset.c | 166 +++++++++++++++++++++
9 files changed, 297 insertions(+), 35 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt
create mode 100644 Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt
create mode 100644 Documentation/devicetree/bindings/power/reset/keystone-reset.txt
create mode 100644 drivers/power/reset/keystone-reset.c
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/