Re: [RFT PATCH] regulator: s2mpa01: Use correct register for buck[36] ramp delay

[Krzysztof Kozlowski]

On pon, 2014-05-26 at 13:37 +0530, Sachin Kamat wrote:
> Hi Krzysztof
> 
> Apologies for the delay. I was on vacation during the early part of
> this month and
> got busy with some other stuff later and this mail fell through the cracks.
> 
> 
> On 23 May 2014 19:49, Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> wrote:
> > Hi Sachin,
> >
> > The s2mpa01 regulator driver uses wrong registers for ramp delay (buck1
> > and buck3 in RAMP1, buck6 in RAMP2) but I am not sure which layout is
> > proper (it seems that that buck1 should be in RAMP2 register).
> >
> > Could you check in S2MPA01 datasheet the registers for ramp delay for
> > buck1, buck3 and buck6?
> 
> I checked the datasheet available with me and according to it
> 
> buck 1 and 6 share the ramp register 0x11 (RAMP2) (bit 4 and 5) and buck 3 uses
> bit 4 and 5 of register 0x10 (RAMP1).

Thanks! I'll send updated version of the patchset.

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/