[jet.chen@xxxxxxxxx: [bio] kernel BUG at drivers/block/virtio_blk.c:166!]

[Maurizio Lombardi]

Hi Jens,

looks like that commit 3979ef4dcf3d1de55a560a3a4016c30a835df44d ("bio-modify-__bio_add_page-to-accept-pages-that-dont-start-a-new-segment-v3")
introduces a regression, as reported by Jet Chan.

Do you have any idea about the possible problem with this patch?

it is the one that performs a recount of the segments in case of failure in __bio_add_page()

http://www.spinics.net/lists/mm-commits/msg103684.html

I would not be surprised if the bug was introduced by fceb38f36f, because it
contained a mystake that commit 3979ef4dcf supposedly fixed.
But learning that commit 3979ef4dcf is introducing a regression leaves
me quite puzzled.

Thanks,
Maurizio Lombardi
> --- Begin Message ---
> Hi Maurizio,
>
> FYI, we noticed the below changes on
>
> commit 3979ef4dcf3d1de55a560a3a4016c30a835df44d ("bio-modify-__bio_add_page-to-accept-pages-that-dont-start-a-new-segment-v3")
>
> +------------------------------------------+------------+------------+
> |                                          | fceb38f36f | 3979ef4dcf |
> +------------------------------------------+------------+------------+
> | boot_successes                           | 25         | 10         |
> | boot_failures                            | 0          | 6          |
> | kernel_BUG_at_drivers/block/virtio_blk.c | 0          | 6          |
> | invalid_opcode                           | 0          | 6          |
> | RIP:virtio_queue_rq                      | 0          | 6          |
> | Kernel_panic-not_syncing:Fatal_exception | 0          | 6          |
> | backtrace:blk_mq_work_fn                 | 0          | 6          |
> | kernel_BUG_at_arch/x86/mm/pageattr.c     | 0          | 3          |
> | RIP:change_page_attr_set_clr             | 0          | 3          |
> +------------------------------------------+------------+------------+
>
>
> [  725.907416] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: acl,user_xattr
> [  728.625269] EXT4-fs (vdd): mounted filesystem without journal. Opts: acl,user_xattr,noload
> [  729.053064] ------------[ cut here ]------------
> [  729.053181] kernel BUG at drivers/block/virtio_blk.c:166!
> [  729.053181] invalid opcode: 0000 [#1] SMP [  729.053181] Modules linked in: ext4 mbcache jbd2 dm_mod fuse sg sr_mod cdrom ata_generic pata_acpi floppy parport_pc snd_pcm parport snd_timer cirrus syscopyarea sysfillrect snd sysimgblt ttm drm_kms_helper soundcore drm pcspkr ata_piix libata i2c_piix4
> [  729.053181] CPU: 0 PID: 1645 Comm: kworker/0:1H Not tainted 3.15.0-rc5-next-20140521 #1
> [  729.053181] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
> [  729.053181] task: ffff880119add880 ti: ffff880103264000 task.ti: ffff880103264000
> [  729.053181] RIP: 0010:[<ffffffff81425b27>]  [<ffffffff81425b27>] virtio_queue_rq+0x217/0x220
> [  729.053181] RSP: 0018:ffff880103265d58  EFLAGS: 00010202
> [  729.053181] RAX: 0000000000000081 RBX: ffff880116164900 RCX: dead000000200200
> [  729.053181] RDX: 0000000000007530 RSI: ffff8800a16c4800 RDI: ffff8800a1693400
> [  729.053181] RBP: ffff880103265d98 R08: ffff8800a16c4800 R09: ffff880103265dc8
> [  729.053181] R10: dffd025bd0493448 R11: 0000000000001000 R12: ffff8800a16c4800
> [  729.053181] R13: ffff880103265dc8 R14: 0000000110000001 R15: ffff8800a1693400
> [  729.053181] FS:  0000000000000000(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000
> [  729.053181] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> [  729.053181] CR2: 000000000225a000 CR3: 000000008fc00000 CR4: 00000000000006f0
> [  729.053181] Stack:
> [  729.053181]  ffff880103265d80 ffffffff810a7295 ffff8800a16c4970 ffff8800a1559680
> [  729.053181]  ffff8800a1693400 ffff880103265dc8 ffff8800a16c4800 ffff8800a14e1280
> [  729.053181]  ffff880103265e00 ffffffff812e0335 ffff8800a1693408 ffff8800a1559680
> [  729.053181] Call Trace:
> [  729.053181]  [<ffffffff810a7295>] ? set_next_entity+0x95/0xb0
> [  729.053181]  [<ffffffff812e0335>] __blk_mq_run_hw_queue+0x245/0x410
> [  729.053181]  [<ffffffff812e0772>] blk_mq_run_work_fn+0x12/0x20
> [  729.053181]  [<ffffffff810893b3>] process_one_work+0x183/0x490
> [  729.053181]  [<ffffffff81089b7d>] worker_thread+0x11d/0x5c0
> [  729.053181]  [<ffffffff81089a60>] ? rescuer_thread+0x3a0/0x3a0
> [  729.053181]  [<ffffffff81090832>] kthread+0xd2/0xf0
> [  729.053181]  [<ffffffff81090760>] ? kthread_create_on_node+0x180/0x180
> [  729.053181]  [<ffffffff8175e47c>] ret_from_fork+0x7c/0xb0
> [  729.053181]  [<ffffffff81090760>] ? kthread_create_on_node+0x180/0x180
> [  729.053181] Code: 00 00 00 00 0f b7 86 f4 00 00 00 c7 86 78 01 00 00 02 00 00 00 48 c7 86 80 01 00 00 00 00 00 00 89 86 7c 01 00 00 e9 6f fe ff ff <0f> 0b 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 41 [  729.053181] RIP  [<ffffffff81425b27>] virtio_queue_rq+0x217/0x220
> [  729.053181]  RSP <ffff880103265d58>
> [  729.053181] ------------[ cut here ]------------
>
>
> Full dmesg and reproduce script attached.
>
> Thanks,
> Jet
>
> mkfs -t ext4 -q /dev/vdc
> mkfs -t ext4 -q /dev/vdb
> mkfs -t ext4 -q /dev/vda
> mkfs -t ext4 -q /dev/vdd
> mount -t ext4 /dev/vda /fs/vda
> mount -t ext4 /dev/vdb /fs/vdb
> mount -t ext4 /dev/vdc /fs/vdc
> mount -t ext4 /dev/vdd /fs/vdd
> export TEST_DIR=/fs/vda
> export TEST_DEV=/dev/vda
> export SCRATCH_MNT=/fs/scratch
> mkdir /fs/scratch -p
> export SCRATCH_DEV=/dev/vdd
> ./check ext4/271 ext4/301 ext4/305
>
> early console in setup code
> Probing EDD (edd=off to disable)... ok
> early console in decompress_kernel
>
> Decompressing Linux... Parsing ELF... done.
> Booting the kernel.
> [    0.000000] Initializing cgroup subsys cpuset
> [    0.000000] Initializing cgroup subsys cpu
> [    0.000000] Linux version 3.15.0-rc5-next-20140521 (kbuild@ivytown2) (gcc version 4.8.2 (Debian 4.8.2-18) ) #1 SMP Wed May 21 16:15:30 CST 2014
> [    0.000000] Command line: user=lkp job=/lkp/scheduled/vpx-6/cyclic_xfstests-ext4-4HDD-ext4-ext4-HEAD-18e072998c67e985aaa643ca1af3e6a0dc133b71.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/18e072998c67e985aaa643ca1af3e6a0dc133b71/vmlinuz-3.15.0-rc5-next-20140521 kconfig=x86_64-rhel commit=18e072998c67e985aaa643ca1af3e6a0dc133b71 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 bm_initrd=/lkp/benchmarks/xfstests.cgz modules_initrd=/kernel/x86_64-rhel/18e072998c67e985aaa643ca1af3e6a0dc133b71/modules.cgz max_uptime=3288 RESULT_ROOT=/result/vpx/xfstests/4HDD-ext4-ext4/x86_64-rhel/18e072998c67e985aaa643ca1af3e6a0dc133b71/0 ip=::::vpx-6::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal
> [    0.000000] e820: BIOS-provided physical RAM map:
> [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
> [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
> [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfffdfff] usable
> [    0.000000] BIOS-e820: [mem 0x00000000dfffe000-0x00000000dfffffff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
> [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
> [    0.000000] bootconsole [earlyser0] enabled
> [    0.000000] NX (Execute Disable) protection: active
> [    0.000000] SMBIOS 2.4 present.
> [    0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011
> [    0.000000] Hypervisor detected: KVM
> [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [    0.000000] No AGP bridge found
> [    0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
> [    0.000000] MTRR default type: write-back
> [    0.000000] MTRR fixed ranges enabled:
> [    0.000000]   00000-9FFFF write-back
> [    0.000000]   A0000-BFFFF uncachable
> [    0.000000]   C0000-FFFFF write-protect
> [    0.000000] MTRR variable ranges enabled:
> [    0.000000]   0 base 00E0000000 mask FFE0000000 uncachable
> [    0.000000]   1 disabled
> [    0.000000]   2 disabled
> [    0.000000]   3 disabled
> [    0.000000]   4 disabled
> [    0.000000]   5 disabled
> [    0.000000]   6 disabled
> [    0.000000]   7 disabled
> [    0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
> [    0.000000] e820: last_pfn = 0xdfffe max_arch_pfn = 0x400000000
> [    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
> [    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
> [    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
> [    0.000000] found SMP MP-table at [mem 0x000fda90-0x000fda9f] mapped at [ffff8800000fda90]
> [    0.000000]   mpc: fdaa0-fdbe4
> [    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
> [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
> [    0.000000] BRK [0x02035000, 0x02035fff] PGTABLE
> [    0.000000] BRK [0x02036000, 0x02036fff] PGTABLE
> [    0.000000] BRK [0x02037000, 0x02037fff] PGTABLE
> [    0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff]
> [    0.000000]  [mem 0x11fe00000-0x11fffffff] page 2M
> [    0.000000] BRK [0x02038000, 0x02038fff] PGTABLE
> [    0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff]
> [    0.000000]  [mem 0x11c000000-0x11fdfffff] page 2M
> [    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
> [    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
> [    0.000000] init_memory_mapping: [mem 0x00100000-0xdfffdfff]
> [    0.000000]  [mem 0x00100000-0x001fffff] page 4k
> [    0.000000]  [mem 0x00200000-0xdfdfffff] page 2M
> [    0.000000]  [mem 0xdfe00000-0xdfffdfff] page 4k
> [    0.000000] RAMDISK: [mem 0x710cc000-0x7fffffff]
> [    0.000000] ACPI: RSDP 0x00000000000FD880 000014 (v00 BOCHS )
> [    0.000000] ACPI: RSDT 0x00000000DFFFE380 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
> [    0.000000] ACPI: FACP 0x00000000DFFFFF80 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
> [    0.000000] ACPI: DSDT 0x00000000DFFFE3C0 0011A9 (v01 BXPC   BXDSDT   00000001 INTL 20100528)
> [    0.000000] ACPI: FACS 0x00000000DFFFFF40 000040
> [    0.000000] ACPI: SSDT 0x00000000DFFFF6E0 000858 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
> [    0.000000] ACPI: APIC 0x00000000DFFFF5B0 000090 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
> [    0.000000] ACPI: HPET 0x00000000DFFFF570 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
> [    0.000000] ACPI: Local APIC address 0xfee00000
> [    0.000000] mapped APIC to ffffffffff57c000 (        fee00000)
> [    0.000000] No NUMA configuration found
> [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
> [    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
> [    0.000000]   NODE_DATA [mem 0x11ffd5000-0x11fffbfff]
> [    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
> [    0.000000] kvm-clock: cpu 0, msr 1:1ff55001, primary cpu clock
> [    0.000000]  [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0
> [    0.000000] Zone ranges:
> [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
> [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
> [    0.000000]   Normal   [mem 0x100000000-0x11fffffff]
> [    0.000000] Movable zone start for each node
> [    0.000000] Early memory node ranges
> [    0.000000]   node   0: [mem 0x00001000-0x0009efff]
> [    0.000000]   node   0: [mem 0x00100000-0xdfffdfff]
> [    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
> [    0.000000] On node 0 totalpages: 1048476
> [    0.000000]   DMA zone: 64 pages used for memmap
> [    0.000000]   DMA zone: 21 pages reserved
> [    0.000000]   DMA zone: 3998 pages, LIFO batch:0
> [    0.000000]   DMA32 zone: 14272 pages used for memmap
> [    0.000000]   DMA32 zone: 913406 pages, LIFO batch:31
> [    0.000000]   Normal zone: 2048 pages used for memmap
> [    0.000000]   Normal zone: 131072 pages, LIFO batch:31
> [    0.000000] ACPI: PM-Timer IO Port: 0xb008
> [    0.000000] ACPI: Local APIC address 0xfee00000
> [    0.000000] mapped APIC to ffffffffff57c000 (        fee00000)
> [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
> [    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
> [    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
> [    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
> [    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
> [    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
> [    0.000000] ACPI: IRQ0 used by override.
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
> [    0.000000] ACPI: IRQ2 used by override.
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
> [    0.000000] ACPI: IRQ5 used by override.
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
> [    0.000000] ACPI: IRQ9 used by override.
> [    0.000000] ACPI: IRQ10 used by override.
> [    0.000000] ACPI: IRQ11 used by override.
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
> [    0.000000] Using ACPI (MADT) for SMP configuration information
> [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
> [    0.000000] mapped IOAPIC to ffffffffff57b000 (fec00000)
> [    0.000000] nr_irqs_gsi: 40
> [    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
> [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
> [    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
> [    0.000000] PM: Registered nosave memory: [mem 0xdfffe000-0xdfffffff]
> [    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfeffbfff]
> [    0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff]
> [    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff]
> [    0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
> [    0.000000] e820: [mem 0xe0000000-0xfeffbfff] available for PCI devices
> [    0.000000] Booting paravirtualized kernel on KVM
> [    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
> [    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fc00000 s86848 r8192 d23744 u524288
> [    0.000000] pcpu-alloc: s86848 r8192 d23744 u524288 alloc=1*2097152
> [    0.000000] pcpu-alloc: [0] 0 1 2 3 
> [    0.000000] KVM setup async PF for cpu 0
> [    0.000000] kvm-stealtime: cpu 0, msr 11fc0e000
> [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1032071
> [    0.000000] Policy zone: Normal
> [    0.000000] Kernel command line: user=lkp job=/lkp/scheduled/vpx-6/cyclic_xfstests-ext4-4HDD-ext4-ext4-HEAD-18e072998c67e985aaa643ca1af3e6a0dc133b71.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/18e072998c67e985aaa643ca1af3e6a0dc133b71/vmlinuz-3.15.0-rc5-next-20140521 kconfig=x86_64-rhel commit=18e072998c67e985aaa643ca1af3e6a0dc133b71 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 bm_initrd=/lkp/benchmarks/xfstests.cgz modules_initrd=/kernel/x86_64-rhel/18e072998c67e985aaa643ca1af3e6a0dc133b71/modules.cgz max_uptime=3288 RESULT_ROOT=/result/vpx/xfstests/4HDD-ext4-ext4/x86_64-rhel/18e072998c67e985aaa643ca1af3e6a0dc133b71/0 ip=::::vpx-6::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal
> [    0.000000] sysrq: sysrq always enabled.
> [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [    0.000000] Checking aperture...
> [    0.000000] No AGP bridge found
> [    0.000000] Memory: 3799264K/4193904K available (7565K kernel code, 1507K rwdata, 3552K rodata, 1728K init, 2188K bss, 394640K reserved)
> [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [    0.000000] Hierarchical RCU implementation.
> [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> [    0.000000] NR_IRQS:524544 nr_irqs:712 16
> [    0.000000] Console: colour VGA+ 80x25
> [    0.000000] console [tty0] enabled
> [    0.000000] bootconsole [earlyser0] disabled
> [    0.000000] Initializing cgroup subsys cpuset
> [    0.000000] Initializing cgroup subsys cpu
> [    0.000000] Linux version 3.15.0-rc5-next-20140521 (kbuild@ivytown2) (gcc version 4.8.2 (Debian 4.8.2-18) ) #1 SMP Wed May 21 16:15:30 CST 2014
> [    0.000000] Command line: user=lkp job=/lkp/scheduled/vpx-6/cyclic_xfstests-ext4-4HDD-ext4-ext4-HEAD-18e072998c67e985aaa643ca1af3e6a0dc133b71.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/18e072998c67e985aaa643ca1af3e6a0dc133b71/vmlinuz-3.15.0-rc5-next-20140521 kconfig=x86_64-rhel commit=18e072998c67e985aaa643ca1af3e6a0dc133b71 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 bm_initrd=/lkp/benchmarks/xfstests.cgz modules_initrd=/kernel/x86_64-rhel/18e072998c67e985aaa643ca1af3e6a0dc133b71/modules.cgz max_uptime=3288 RESULT_ROOT=/result/vpx/xfstests/4HDD-ext4-ext4/x86_64-rhel/18e072998c67e985aaa643ca1af3e6a0dc133b71/0 ip=::::vpx-6::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal
> [    0.000000] e820: BIOS-provided physical RAM map:
> [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
> [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
> [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfffdfff] usable
> [    0.000000] BIOS-e820: [mem 0x00000000dfffe000-0x00000000dfffffff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
> [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
> [    0.000000] bootconsole [earlyser0] enabled
> [    0.000000] NX (Execute Disable) protection: active
> [    0.000000] SMBIOS 2.4 present.
> [    0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011
> [    0.000000] Hypervisor detected: KVM
> [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [    0.000000] No AGP bridge found
> [    0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
> [    0.000000] MTRR default type: write-back
> [    0.000000] MTRR fixed ranges enabled:
> [    0.000000]   00000-9FFFF write-back
> [    0.000000]   A0000-BFFFF uncachable
> [    0.000000]   C0000-FFFFF write-protect
> [    0.000000] MTRR variable ranges enabled:
> [    0.000000]   0 base 00E0000000 mask FFE0000000 uncachable
> [    0.000000]   1 disabled
> [    0.000000]   2 disabled
> [    0.000000]   3 disabled
> [    0.000000]   4 disabled
> [    0.000000]   5 disabled
> [    0.000000]   6 disabled
> [    0.000000]   7 disabled
> [    0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
> [    0.000000] e820: last_pfn = 0xdfffe max_arch_pfn = 0x400000000
> [    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
> [    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
> [    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
> [    0.000000] found SMP MP-table at [mem 0x000fda90-0x000fda9f] mapped at [ffff8800000fda90]
> [    0.000000]   mpc: fdaa0-fdbe4
> [    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
> [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
> [    0.000000] BRK [0x02035000, 0x02035fff] PGTABLE
> [    0.000000] BRK [0x02036000, 0x02036fff] PGTABLE
> [    0.000000] BRK [0x02037000, 0x02037fff] PGTABLE
> [    0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff]
> [    0.000000]  [mem 0x11fe00000-0x11fffffff] page 2M
> [    0.000000] BRK [0x02038000, 0x02038fff] PGTABLE
> [    0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff]
> [    0.000000]  [mem 0x11c000000-0x11fdfffff] page 2M
> [    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
> [    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
> [    0.000000] init_memory_mapping: [mem 0x00100000-0xdfffdfff]
> [    0.000000]  [mem 0x00100000-0x001fffff] page 4k
> [    0.000000]  [mem 0x00200000-0xdfdfffff] page 2M
> [    0.000000]  [mem 0xdfe00000-0xdfffdfff] page 4k
> [    0.000000] RAMDISK: [mem 0x710cc000-0x7fffffff]
> [    0.000000] ACPI: RSDP 0x00000000000FD880 000014 (v00 BOCHS )
> [    0.000000] ACPI: RSDT 0x00000000DFFFE380 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
> [    0.000000] ACPI: FACP 0x00000000DFFFFF80 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
> [    0.000000] ACPI: DSDT 0x00000000DFFFE3C0 0011A9 (v01 BXPC   BXDSDT   00000001 INTL 20100528)
> [    0.000000] ACPI: FACS 0x00000000DFFFFF40 000040
> [    0.000000] ACPI: SSDT 0x00000000DFFFF6E0 000858 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
> [    0.000000] ACPI: APIC 0x00000000DFFFF5B0 000090 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
> [    0.000000] ACPI: HPET 0x00000000DFFFF570 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
> [    0.000000] ACPI: Local APIC address 0xfee00000
> [    0.000000] mapped APIC to ffffffffff57c000 (        fee00000)
> [    0.000000] No NUMA configuration found
> [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
> [    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
> [    0.000000]   NODE_DATA [mem 0x11ffd5000-0x11fffbfff]
> [    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
> [    0.000000] kvm-clock: cpu 0, msr 1:1ff55001, primary cpu clock
> [    0.000000]  [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0
> [    0.000000] Zone ranges:
> [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
> [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
> [    0.000000]   Normal   [mem 0x100000000-0x11fffffff]
> [    0.000000] Movable zone start for each node
> [    0.000000] Early memory node ranges
> [    0.000000]   node   0: [mem 0x00001000-0x0009efff]
> [    0.000000]   node   0: [mem 0x00100000-0xdfffdfff]
> [    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
> [    0.000000] On node 0 totalpages: 1048476
> [    0.000000]   DMA zone: 64 pages used for memmap
> [    0.000000]   DMA zone: 21 pages reserved
> [    0.000000]   DMA zone: 3998 pages, LIFO batch:0
> [    0.000000]   DMA32 zone: 14272 pages used for memmap
> [    0.000000]   DMA32 zone: 913406 pages, LIFO batch:31
> [    0.000000]   Normal zone: 2048 pages used for memmap
> [    0.000000]   Normal zone: 131072 pages, LIFO batch:31
> [    0.000000] ACPI: PM-Timer IO Port: 0xb008
> [    0.000000] ACPI: Local APIC address 0xfee00000
> [    0.000000] mapped APIC to ffffffffff57c000 (        fee00000)
> [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
> [    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
> [    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
> [    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
> [    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
> [    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
> [    0.000000] ACPI: IRQ0 used by override.
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
> [    0.000000] ACPI: IRQ2 used by override.
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
> [    0.000000] ACPI: IRQ5 used by override.
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
> [    0.000000] ACPI: IRQ9 used by override.
> [    0.000000] ACPI: IRQ10 used by override.
> [    0.000000] ACPI: IRQ11 used by override.
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
> [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
> [    0.000000] Using ACPI (MADT) for SMP configuration information
> [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
> [    0.000000] mapped IOAPIC to ffffffffff57b000 (fec00000)
> [    0.000000] nr_irqs_gsi: 40
> [    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
> [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
> [    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
> [    0.000000] PM: Registered nosave memory: [mem 0xdfffe000-0xdfffffff]
> [    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfeffbfff]
> [    0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff]
> [    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff]
> [    0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
> [    0.000000] e820: [mem 0xe0000000-0xfeffbfff] available for PCI devices
> [    0.000000] Booting paravirtualized kernel on KVM
> [    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
> [    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fc00000 s86848 r8192 d23744 u524288
> [    0.000000] pcpu-alloc: s86848 r8192 d23744 u524288 alloc=1*2097152
> [    0.000000] pcpu-alloc: [0] 0 1 2 3 
> [    0.000000] KVM setup async PF for cpu 0
> [    0.000000] kvm-stealtime: cpu 0, msr 11fc0e000
> [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1032071
> [    0.000000] Policy zone: Normal
> [    0.000000] Kernel command line: user=lkp job=/lkp/scheduled/vpx-6/cyclic_xfstests-ext4-4HDD-ext4-ext4-HEAD-18e072998c67e985aaa643ca1af3e6a0dc133b71.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/18e072998c67e985aaa643ca1af3e6a0dc133b71/vmlinuz-3.15.0-rc5-next-20140521 kconfig=x86_64-rhel commit=18e072998c67e985aaa643ca1af3e6a0dc133b71 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 bm_initrd=/lkp/benchmarks/xfstests.cgz modules_initrd=/kernel/x86_64-rhel/18e072998c67e985aaa643ca1af3e6a0dc133b71/modules.cgz max_uptime=3288 RESULT_ROOT=/result/vpx/xfstests/4HDD-ext4-ext4/x86_64-rhel/18e072998c67e985aaa643ca1af3e6a0dc133b71/0 ip=::::vpx-6::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal
> [    0.000000] sysrq: sysrq always enabled.
> [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [    0.000000] Checking aperture...
> [    0.000000] No AGP bridge found
> [    0.000000] Memory: 3799264K/4193904K available (7565K kernel code, 1507K rwdata, 3552K rodata, 1728K init, 2188K bss, 394640K reserved)
> [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [    0.000000] Hierarchical RCU implementation.
> [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> [    0.000000] NR_IRQS:524544 nr_irqs:712 16
> [    0.000000] Console: colour VGA+ 80x25
> [    0.000000] console [tty0] enabled
> [    0.000000] bootconsole [earlyser0] disabled
> [    0.000000] console [ttyS0] enabled
> [    0.000000] allocated 16777216 bytes of page_cgroup
> [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [    0.000000] hpet clockevent registered
> [    0.000000] tsc: Detected 2693.474 MHz processor
> [    0.002000] Calibrating delay loop (skipped) preset value.. 5386.94 BogoMIPS (lpj=2693474)
> [    0.002333] pid_max: default: 32768 minimum: 301
> [    0.003016] ACPI: Core revision 20140424
> [    0.004851] ACPI: All ACPI Tables successfully acquired
> [    0.005687] Security Framework initialized
> [    0.006009] SELinux:  Initializing.
> [    0.007010] SELinux:  Starting in permissive mode
> [    0.008160] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> [    0.012084] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> [    0.014375] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
> [    0.015010] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
> [    0.016357] Initializing cgroup subsys memory
> [    0.017028] Initializing cgroup subsys devices
> [    0.018010] Initializing cgroup subsys freezer
> [    0.018681] Initializing cgroup subsys net_cls
> [    0.019007] Initializing cgroup subsys blkio
> [    0.020008] Initializing cgroup subsys perf_event
> [    0.020707] Initializing cgroup subsys hugetlb
> [    0.021056] mce: CPU supports 10 MCE banks
> [    0.022041] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
> [    0.022041] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
> [    0.022041] tlb_flushall_shift: 6
> [    0.023110] Freeing SMP alternatives memory: 32K (ffffffff81e08000 - ffffffff81e10000)
> [    0.027361] ftrace: allocating 28488 entries in 112 pages
> [    0.034151] Getting VERSION: 50014
> [    0.035008] Getting VERSION: 50014
> [    0.035581] Getting ID: 0
> [    0.036011] Getting ID: ff000000
> [    0.036578] Getting LVT0: 8700
> [    0.037005] Getting LVT1: 8400
> [    0.037592] enabled ExtINT on CPU#0
> [    0.039115] ENABLING IO-APIC IRQs
> [    0.039681] init IO_APIC IRQs
> [    0.040004]  apic 0 pin 0 not connected
> [    0.040628] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
> [    0.041015] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
> [    0.042015] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
> [    0.043014] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
> [    0.044018] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
> [    0.046002] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
> [    0.047013] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
> [    0.048014] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
> [    0.049014] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
> [    0.050013] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
> [    0.051013] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
> [    0.052014] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
> [    0.053014] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
> [    0.054013] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
> [    0.055014] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
> [    0.056012]  apic 0 pin 16 not connected
> [    0.056622]  apic 0 pin 17 not connected
> [    0.057002]  apic 0 pin 18 not connected
> [    0.058002]  apic 0 pin 19 not connected
> [    0.058613]  apic 0 pin 20 not connected
> [    0.059002]  apic 0 pin 21 not connected
> [    0.060002]  apic 0 pin 22 not connected
> [    0.060606]  apic 0 pin 23 not connected
> [    0.061151] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [    0.062002] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01)
> [    0.064004] Using local APIC timer interrupts.
> [    0.064004] calibrating APIC timer ...
> [    0.066000] ... lapic delta = 6251428
> [    0.066000] ... PM-Timer delta = 358092
> [    0.066000] ... PM-Timer result ok
> [    0.066000] ..... delta 6251428
> [    0.066000] ..... mult: 268496788
> [    0.066000] ..... calibration result: 1000228
> [    0.066000] ..... CPU clock speed is 2694.0928 MHz.
> [    0.066000] ..... host bus clock speed is 1000.0228 MHz.
> [    0.066086] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
> [    0.069515] NMI watchdog: disabled (cpu0): hardware events not enabled
> [    0.070191] x86: Booting SMP configuration:
> [    0.071003] .... node  #0, CPUs:      #1
> [    0.069488] kvm-clock: cpu 1, msr 1:1ff55041, secondary cpu clock
> [    0.069488] masked ExtINT on CPU#1
> [    0.084054] KVM setup async PF for cpu 1
> [    0.085000]  #2
> [    0.085000] kvm-stealtime: cpu 1, msr 11fc8e000
> [    0.084053] kvm-clock: cpu 2, msr 1:1ff55081, secondary cpu clock
> [    0.084053] masked ExtINT on CPU#2
> [    0.097011] KVM setup async PF for cpu 2
> [    0.097788]  #3
> [    0.097788] kvm-stealtime: cpu 2, msr 11fd0e000
> [    0.097024] kvm-clock: cpu 3, msr 1:1ff550c1, secondary cpu clock
> [    0.097024] masked ExtINT on CPU#3
> [    0.110028] x86: Booted up 1 node, 4 CPUs
> [    0.110011] KVM setup async PF for cpu 3
> [    0.110015] kvm-stealtime: cpu 3, msr 11fd8e000
> [    0.112003] smpboot: Total of 4 processors activated (21547.79 BogoMIPS)
> [    0.114314] devtmpfs: initialized
> [    0.117366] evm: security.selinux
> [    0.117983] evm: security.ima
> [    0.118002] evm: security.capability
> [    0.120231] atomic64 test passed for x86-64 platform with CX8 and with SSE
> [    0.121080] NET: Registered protocol family 16
> [    0.122229] cpuidle: using governor menu
> [    0.123192] ACPI: bus type PCI registered
> [    0.123877] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [    0.124114] PCI: Using configuration type 1 for base access
> [    0.129129] ACPI: Added _OSI(Module Device)
> [    0.130003] ACPI: Added _OSI(Processor Device)
> [    0.131002] ACPI: Added _OSI(3.0 _SCP Extensions)
> [    0.131751] ACPI: Added _OSI(Processor Aggregator Device)
> [    0.134315] ACPI: Interpreter enabled
> [    0.134971] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
> [    0.136500] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
> [    0.138010] ACPI: (supports S0 S3 S4 S5)
> [    0.138678] ACPI: Using IOAPIC for interrupt routing
> [    0.139015] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [    0.143052] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [    0.143965] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
> [    0.144007] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
> [    0.146005] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
> [    0.147268] acpiphp: Slot [3] registered
> [    0.148022] acpiphp: Slot [4] registered
> [    0.149021] acpiphp: Slot [5] registered
> [    0.150021] acpiphp: Slot [6] registered
> [    0.150711] acpiphp: Slot [7] registered
> [    0.151033] acpiphp: Slot [8] registered
> [    0.152021] acpiphp: Slot [9] registered
> [    0.152708] acpiphp: Slot [10] registered
> [    0.153021] acpiphp: Slot [11] registered
> [    0.154023] acpiphp: Slot [12] registered
> [    0.154718] acpiphp: Slot [13] registered
> [    0.155020] acpiphp: Slot [14] registered
> [    0.156028] acpiphp: Slot [15] registered
> [    0.157091] acpiphp: Slot [24] registered
> [    0.157788] acpiphp: Slot [25] registered
> [    0.158020] acpiphp: Slot [26] registered
> [    0.159029] acpiphp: Slot [27] registered
> [    0.159740] acpiphp: Slot [28] registered
> [    0.160021] acpiphp: Slot [29] registered
> [    0.161027] acpiphp: Slot [30] registered
> [    0.162021] acpiphp: Slot [31] registered
> [    0.162701] PCI host bridge to bus 0000:00
> [    0.163004] pci_bus 0000:00: root bus resource [bus 00-ff]
> [    0.164003] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
> [    0.165003] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
> [    0.166003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> [    0.167003] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
> [    0.168032] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
> [    0.169256] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
> [    0.170394] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
> [    0.174003] pci 0000:00:01.1: reg 0x20: [io  0xc1c0-0xc1cf]
> [    0.175793] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
> [    0.176003] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
> [    0.177003] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
> [    0.178002] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
> [    0.179131] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
> [    0.181165] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
> [    0.182010] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
> [    0.183185] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
> [    0.185618] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
> [    0.188031] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff]
> [    0.195036] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
> [    0.196385] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
> [    0.198501] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff]
> [    0.200013] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
> [    0.206003] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
> [    0.207184] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
> [    0.209003] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
> [    0.211003] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
> [    0.217116] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
> [    0.219003] pci 0000:00:05.0: reg 0x10: [io  0xc080-0xc0bf]
> [    0.221507] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff]
> [    0.227267] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000
> [    0.229503] pci 0000:00:06.0: reg 0x10: [io  0xc0c0-0xc0ff]
> [    0.231003] pci 0000:00:06.0: reg 0x14: [mem 0xfebf3000-0xfebf3fff]
> [    0.237264] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000
> [    0.239003] pci 0000:00:07.0: reg 0x10: [io  0xc100-0xc13f]
> [    0.241003] pci 0000:00:07.0: reg 0x14: [mem 0xfebf4000-0xfebf4fff]
> [    0.247247] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000
> [    0.249003] pci 0000:00:08.0: reg 0x10: [io  0xc140-0xc17f]
> [    0.250980] pci 0000:00:08.0: reg 0x14: [mem 0xfebf5000-0xfebf5fff]
> [    0.257084] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000
> [    0.258977] pci 0000:00:09.0: reg 0x10: [io  0xc180-0xc1bf]
> [    0.260500] pci 0000:00:09.0: reg 0x14: [mem 0xfebf6000-0xfebf6fff]
> [    0.266744] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000
> [    0.268262] pci 0000:00:0a.0: reg 0x10: [mem 0xfebf7000-0xfebf700f]
> [    0.272509] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
> [    0.273710] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
> [    0.275074] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
> [    0.276429] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
> [    0.277593] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
> [    0.278852] ACPI: Enabled 16 GPEs in block 00 to 0F
> [    0.280195] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [    0.281003] vgaarb: loaded
> [    0.282002] vgaarb: bridge control possible 0000:00:02.0
> [    0.283192] SCSI subsystem initialized
> [    0.283902] ACPI: bus type USB registered
> [    0.284042] usbcore: registered new interface driver usbfs
> [    0.285018] usbcore: registered new interface driver hub
> [    0.286107] usbcore: registered new device driver usb
> [    0.287041] pps_core: LinuxPPS API ver. 1 registered
> [    0.288002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
> [    0.289008] PTP clock support registered
> [    0.290119] PCI: Using ACPI for IRQ routing
> [    0.291005] PCI: pci_cache_line_size set to 64 bytes
> [    0.291939] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
> [    0.292006] e820: reserve RAM buffer [mem 0xdfffe000-0xdfffffff]
> [    0.293196] NetLabel: Initializing
> [    0.294005] NetLabel:  domain hash size = 128
> [    0.295001] NetLabel:  protocols = UNLABELED CIPSOv4
> [    0.296020] NetLabel:  unlabeled traffic allowed by default
> [    0.297124] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
> [    0.298020] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [    0.299003] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
> [    0.303079] Switched to clocksource kvm-clock
> [    0.313800] pnp: PnP ACPI init
> [    0.314416] ACPI: bus type PNP registered
> [    0.315157] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:15)
> [    0.316490] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
> [    0.317466] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:15)
> [    0.318811] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
> [    0.319797] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:15)
> [    0.321146] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
> [    0.322126] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:15)
> [    0.323439] pnp 00:03: [dma 2]
> [    0.324057] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
> [    0.324992] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:15)
> [    0.326248] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
> [    0.327169] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:15)
> [    0.328414] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
> [    0.329343] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:15)
> [    0.330597] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
> [    0.331577] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
> [    0.332544] pnp: PnP ACPI: found 8 devices
> [    0.333239] ACPI: bus type PNP unregistered
> [    0.343998] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
> [    0.344858] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
> [    0.345704] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [    0.346613] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
> [    0.347566] NET: Registered protocol family 2
> [    0.348520] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
> [    0.350127] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
> [    0.351418] TCP: Hash tables configured (established 32768 bind 32768)
> [    0.352455] TCP: reno registered
> [    0.353069] UDP hash table entries: 2048 (order: 4, 65536 bytes)
> [    0.354013] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
> [    0.355086] NET: Registered protocol family 1
> [    0.355999] RPC: Registered named UNIX socket transport module.
> [    0.356846] RPC: Registered udp transport module.
> [    0.357560] RPC: Registered tcp transport module.
> [    0.358274] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [    0.359162] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
> [    0.359995] pci 0000:00:01.0: PIIX3: Enabling Passive Release
> [    0.360840] pci 0000:00:01.0: Activating ISA DMA hang workarounds
> [    0.361731] pci 0000:00:02.0: Boot video device
> [    0.362486] PCI: CLS 0 bytes, default 64
> [    0.363234] Unpacking initramfs...
> [    4.686967] Freeing initrd memory: 244944K (ffff8800710cc000 - ffff880080000000)
> [    4.688281] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [    4.689225] software IO TLB [mem 0xdbffe000-0xdfffe000] (64MB) mapped at [ffff8800dbffe000-ffff8800dfffdfff]
> [    4.692144] futex hash table entries: 1024 (order: 4, 65536 bytes)
> [    4.693412] Initialise system trusted keyring
> [    4.694431] audit: initializing netlink subsys (disabled)
> [    4.695580] audit: type=2000 audit(1400663208.226:1): initialized
> [    4.697654] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [    4.701137] zbud: loaded
> [    4.702195] VFS: Disk quotas dquot_6.5.2
> [    4.703169] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [    4.705073] 9p: Installing v9fs 9p2000 file system support
> [    4.706280] msgmni has been set to 7898
> [    4.707395] Key type big_key registered
> [    4.708321] SELinux:  Registering netfilter hooks
> [    4.712872] alg: No test for stdrng (krng)
> [    4.713619] NET: Registered protocol family 38
> [    4.714748] Key type asymmetric registered
> [    4.715800] Asymmetric key parser 'x509' registered
> [    4.717019] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
> [    4.718993] io scheduler noop registered
> [    4.720000] io scheduler deadline registered (default)
> [    4.721269] io scheduler cfq registered
> [    4.722402] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [    4.723665] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [    4.725224] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> [    4.727107] ACPI: Power Button [PWRF]
> [    4.728510] GHES: HEST is not enabled!
> [    4.729955] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
> [    4.731256] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:15)
> [    4.735259] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
> [    4.736592] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:15)
> [    4.740623] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
> [    4.744308] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> [    4.754489] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [    4.780451] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> [    4.783287] Non-volatile memory driver v1.3
> [    4.784379] Linux agpgart interface v0.103
> [    4.785881] virtio-pci 0000:00:04.0: irq 40 for MSI/MSI-X
> [    4.787192] virtio-pci 0000:00:04.0: irq 41 for MSI/MSI-X
> [    4.789840]  vda: unknown partition table
> [    4.792757] virtio-pci 0000:00:05.0: irq 42 for MSI/MSI-X
> [    4.794021] virtio-pci 0000:00:05.0: irq 43 for MSI/MSI-X
> [    4.796459]  vdb: unknown partition table
> [    4.799235] virtio-pci 0000:00:06.0: irq 44 for MSI/MSI-X
> [    4.800505] virtio-pci 0000:00:06.0: irq 45 for MSI/MSI-X
> [    4.802956]  vdc: unknown partition table
> [    4.805693] virtio-pci 0000:00:07.0: irq 46 for MSI/MSI-X
> [    4.806984] virtio-pci 0000:00:07.0: irq 47 for MSI/MSI-X
> [    4.809438]  vdd: unknown partition table
> [    4.812159] virtio-pci 0000:00:08.0: irq 48 for MSI/MSI-X
> [    4.813395] virtio-pci 0000:00:08.0: irq 49 for MSI/MSI-X
> [    4.816076]  vde: unknown partition table
> [    4.819073] virtio-pci 0000:00:09.0: irq 50 for MSI/MSI-X
> [    4.820486] virtio-pci 0000:00:09.0: irq 51 for MSI/MSI-X
> [    4.822864]  vdf: unknown partition table
> [    4.825623] rdac: device handler registered
> [    4.827034] hp_sw: device handler registered
> [    4.828414] emc: device handler registered
> [    4.829610] alua: device handler registered
> [    4.830879] libphy: Fixed MDIO Bus: probed
> [    4.832131] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
> [    4.833857] e1000: Copyright (c) 1999-2006 Intel Corporation.
> [    5.156973] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
> [    5.157931] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
> [    5.158879] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
> [    5.159685] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
> [    5.160514] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
> [    5.161416] igb: Copyright (c) 2007-2014 Intel Corporation.
> [    5.162209] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.19.1-k
> [    5.163359] ixgbe: Copyright (c) 1999-2014 Intel Corporation.
> [    5.164219] usbcore: registered new interface driver catc
> [    5.164981] usbcore: registered new interface driver kaweth
> [    5.165760] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
> [    5.166898] usbcore: registered new interface driver pegasus
> [    5.170120] usbcore: registered new interface driver rtl8150
> [    5.170905] usbcore: registered new interface driver asix
> [    5.171664] usbcore: registered new interface driver cdc_ether
> [    5.172470] usbcore: registered new interface driver cdc_eem
> [    5.173266] usbcore: registered new interface driver dm9601
> [    5.174052] usbcore: registered new interface driver smsc75xx
> [    5.174841] usbcore: registered new interface driver smsc95xx
> [    5.175638] usbcore: registered new interface driver gl620a
> [    5.176423] usbcore: registered new interface driver net1080
> [    5.177236] usbcore: registered new interface driver plusb
> [    5.178021] usbcore: registered new interface driver rndis_host
> [    5.178827] usbcore: registered new interface driver cdc_subset
> [    5.179637] usbcore: registered new interface driver zaurus
> [    5.180417] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
> [    5.181557] usbcore: registered new interface driver int51x1
> [    5.182348] usbcore: registered new interface driver ipheth
> [    5.183133] usbcore: registered new interface driver sierra_net
> [    5.183986] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [    5.184874] ehci-pci: EHCI PCI platform driver
> [    5.185558] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [    5.186394] ohci-pci: OHCI PCI platform driver
> [    5.187073] uhci_hcd: USB Universal Host Controller Interface driver
> [    5.187970] usbcore: registered new interface driver usbserial
> [    5.188787] usbcore: registered new interface driver usbserial_generic
> [    5.189658] usbserial: USB Serial support registered for generic
> [    5.190509] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
> [    5.192376] serio: i8042 KBD port at 0x60,0x64 irq 1
> [    5.193201] serio: i8042 AUX port at 0x60,0x64 irq 12
> [    5.194070] mousedev: PS/2 mouse device common for all mice
> [    5.195315] rtc_cmos 00:00: RTC can wake from S4
> [    5.196383] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
> [    5.198089] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
> [    5.199271] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
> [    5.200384] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05
> [    5.201553] i6300esb: initialized (0xffffc90000764000). heartbeat=30 sec (nowayout=0)
> [    5.202944] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
> [    5.203843] iTCO_vendor_support: vendor-support=0
> [    5.204761] hidraw: raw HID events driver (C) Jiri Kosina
> [    5.205851] usbcore: registered new interface driver usbhid
> [    5.206751] usbhid: USB HID core driver
> [    5.207503] drop_monitor: Initializing network drop monitor service
> [    5.208600] TCP: cubic registered
> [    5.209336] Initializing XFRM netlink socket
> [    5.210325] NET: Registered protocol family 10
> [    5.211430] NET: Registered protocol family 17
> [    5.212219] 9pnet: Installing 9P2000 support
> [    5.213279] 
> [    5.213279] printing PIC contents
> [    5.214273] ... PIC  IMR: ffff
> [    5.214889] ... PIC  IRR: 1113
> [    5.215519] ... PIC  ISR: 0000
> [    5.216152] ... PIC ELCR: 0c00
> [    5.216788] printing local APIC contents on CPU#0/0:
> [    5.217578] ... APIC ID:      00000000 (0)
> [    5.217776] ... APIC VERSION: 00050014
> [    5.217776] ... APIC TASKPRI: 00000000 (00)
> [    5.217776] ... APIC PROCPRI: 00000000
> [    5.217776] ... APIC LDR: 01000000
> [    5.217776] ... APIC DFR: ffffffff
> [    5.217776] ... APIC SPIV: 000001ff
> [    5.217776] ... APIC ISR field:
> [    5.217776] 0000000000000000000000000000000000000000000000000000000000000000
> [    5.217776] ... APIC TMR field:
> [    5.217776] 0000000002000000000000000000000000000000000000000000000000000000
> [    5.217776] ... APIC IRR field:
> [    5.217776] 0000000000000000000000000000000000000000000000000000000000000000
> [    5.217776] ... APIC ESR: 00000000
> [    5.217776] ... APIC ICR: 000008fd
> [    5.217776] ... APIC ICR2: 02000000
> [    5.217776] ... APIC LVTT: 000000ef
> [    5.217776] ... APIC LVTPC: 00010000
> [    5.217776] ... APIC LVT0: 00010700
> [    5.217776] ... APIC LVT1: 00000400
> [    5.217776] ... APIC LVTERR: 000000fe
> [    5.217776] ... APIC TMICT: 01c9982d
> [    5.217776] ... APIC TMCCT: 01b3ccc3
> [    5.217776] ... APIC TDCR: 00000003
> [    5.217776] 
> [    5.235812] number of MP IRQ sources: 15.
> [    5.236477] number of IO-APIC #0 registers: 24.
> [    5.237179] testing the IO APIC.......................
> [    5.237941] IO APIC #0......
> [    5.238481] .... register #00: 00000000
> [    5.239115] .......    : physical APIC id: 00
> [    5.239789] .......    : Delivery Type: 0
> [    5.240435] .......    : LTS          : 0
> [    5.241083] .... register #01: 00170011
> [    5.241702] .......     : max redirection entries: 17
> [    5.242456] .......     : PRQ implemented: 0
> [    5.243132] .......     : IO APIC version: 11
> [    5.243808] .... register #02: 00000000
> [    5.244438] .......     : arbitration: 00
> [    5.245092] .... IRQ redirection table:
> [    5.245723] 1    0    0   0   0    0    0    00
> [    5.246428] 0    0    0   0   0    1    1    31
> [    5.247139] 0    0    0   0   0    1    1    30
> [    5.247834] 0    0    0   0   0    1    1    33
> [    5.248543] 1    0    0   0   0    1    1    34
> [    5.249313] 1    1    0   0   0    1    1    35
> [    5.250022] 0    0    0   0   0    1    1    36
> [    5.250716] 0    0    0   0   0    1    1    37
> [    5.251422] 0    0    0   0   0    1    1    38
> [    5.252131] 0    1    0   0   0    1    1    39
> [    5.252828] 1    1    0   0   0    1    1    3A
> [    5.253524] 1    1    0   0   0    1    1    3B
> [    5.254223] 0    0    0   0   0    1    1    3C
> [    5.254901] 0    0    0   0   0    1    1    3D
> [    5.255591] 0    0    0   0   0    1    1    3E
> [    5.256277] 0    0    0   0   0    1    1    3F
> [    5.256958] 1    0    0   0   0    0    0    00
> [    5.257642] 1    0    0   0   0    0    0    00
> [    5.258332] 1    0    0   0   0    0    0    00
> [    5.259016] 1    0    0   0   0    0    0    00
> [    5.259689] 1    0    0   0   0    0    0    00
> [    5.260384] 1    0    0   0   0    0    0    00
> [    5.261070] 1    0    0   0   0    0    0    00
> [    5.261746] 1    0    0   0   0    0    0    00
> [    5.262420] IRQ to pin mappings:
> [    5.262970] IRQ0 -> 0:2
> [    5.263578] IRQ1 -> 0:1
> [    5.264185] IRQ3 -> 0:3
> [    5.264783] IRQ4 -> 0:4
> [    5.265391] IRQ5 -> 0:5
> [    5.265990] IRQ6 -> 0:6
> [    5.266592] IRQ7 -> 0:7
> [    5.267197] IRQ8 -> 0:8
> [    5.267794] IRQ9 -> 0:9
> [    5.268397] IRQ10 -> 0:10
> [    5.269029] IRQ11 -> 0:11
> [    5.269639] IRQ12 -> 0:12
> [    5.270260] IRQ13 -> 0:13
> [    5.270882] IRQ14 -> 0:14
> [    5.271499] IRQ15 -> 0:15
> [    5.272123] .................................... done.
> [    5.273062] Loading compiled-in X.509 certificates
> [    5.274498] Loaded X.509 cert 'Magrathea: Glacier signing key: 9636e5ada1c9890bf04ae4b43152ea2863600d80'
> [    5.275923] registered taskstats version 1
> [    5.279501] Key type trusted registered
> [    5.282392] Key type encrypted registered
> [    5.284937] ima: No TPM chip found, activating TPM-bypass!
> [    5.286378] rtc_cmos 00:00: setting system clock to 2014-05-21 17:06:48 UTC (1400692008)
> [    5.290682] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [    5.691205] tsc: Refined TSC clocksource calibration: 2693.508 MHz
> [    6.045804] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
> [    7.295543] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
> [    7.297139] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [    7.307077] Sending DHCP requests ., OK
> [    7.312084] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15
> [    7.313245] IP-Config: Complete:
> [    7.313855]      device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2
> [    7.315328]      host=vpx-6, domain=, nis-domain=(none)
> [    7.316138]      bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath=
> [    7.316831]      nameserver0=10.0.2.3
> [    7.317834] PM: Hibernation image not present or could not be loaded.
> [    7.320210] Freeing unused kernel memory: 1728K (ffffffff81c58000 - ffffffff81e08000)
> [    7.449056] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
> [    7.454434] libata version 3.00 loaded.
> [    7.456754] ata_piix 0000:00:01.1: version 2.13
> [    7.466426] input: PC Speaker as /devices/platform/pcspkr/input/input4
> [    7.467430] scsi0 : ata_piix
> [    7.471296] scsi1 : ata_piix
> [    7.473016] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc1c0 irq 14
> [    7.474086] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc1c8 irq 15
> [    7.476639] [drm] Initialized drm 1.1.0 20060810
> [    7.490298] [TTM] Zone  kernel: Available graphics memory: 2022984 kiB
> [    7.491356] [TTM] Initializing pool allocator
> [    7.491407] [TTM] Initializing DMA pool allocator
> [    7.491712] [drm] fb mappable at 0xFC000000
> [    7.491713] [drm] vram aper at 0xFC000000
> [    7.491715] [drm] size 4194304
> [    7.491715] [drm] fb depth is 24
> [    7.491715] [drm]    pitch is 3072
> [    7.496997] fbcon: cirrusdrmfb (fb0) is primary device
> [    7.501841] parport_pc 00:04: reported by Plug and Play ACPI
> [    7.501950] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
> [    7.502877] Error: Driver 'pcspkr' is already registered, aborting...
> [    7.503464] Floppy drive(s): fd0 is 1.44M
> [    7.512629] Console: switching to colour frame buffer device 128x48
> [    7.514408] FDC 0 is a S82078B
> [    7.525574] cirrus 0000:00:02.0: fb0: cirrusdrmfb frame buffer device
> [    7.525575] cirrus 0000:00:02.0: registered panic notifier
> [    7.537168] [drm] Initialized cirrus 1.0.0 20110418 for 0000:00:02.0 on minor 0
> [    7.626380] ata2.01: NODEV after polling detection
> [    7.626996] ata2.00: ATAPI: QEMU DVD-ROM, 1.7.1, max UDMA/100
> [    7.627828] ata2.00: configured for MWDMA2
> [    7.628778] scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     1.7. PQ: 0 ANSI: 5
> [    7.648783] sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
> [    7.649276] cdrom: Uniform CD-ROM driver Revision: 3.20
> [    7.649823] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [    7.653288] sr 1:0:0:0: Attached scsi generic sg0 type 5
> [    7.786457] fuse init (API version 7.23)
> [    8.043756] device-mapper: uevent: version 1.0.3
> [    8.045415] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx
> [    8.049449] random: vgscan urandom read with 49 bits of entropy available
>
> ==> /lkp/lkp/src/tmp/run_log <==
> Kernel tests: Boot OK!
> PATH=/sbin:/usr/sbin:/bin:/usr/bin
>
> ==> /lkp/lkp/src/tmp/err_log <==
>
> ==> /lkp/lkp/src/tmp/run_log <==
> downloading latest lkp src code
> Kernel tests: Boot OK 2!
> /lkp/lkp/src/bin/run-lkp
> LKP_SRC_DIR=/lkp/lkp/src
> RESULT_ROOT=/result/vpx/xfstests/4HDD-ext4-ext4/x86_64-rhel/18e072998c67e985aaa643ca1af3e6a0dc133b71/0
> job=/lkp/scheduled/vpx-6/cyclic_xfstests-ext4-4HDD-ext4-ext4-HEAD-18e072998c67e985aaa643ca1af3e6a0dc133b71.yaml
> run-job /lkp/scheduled/vpx-6/cyclic_xfstests-ext4-4HDD-ext4-ext4-HEAD-18e072998c67e985aaa643ca1af3e6a0dc133b71.yaml
> 2014-05-21 17:23:24 mkfs -t ext4 -q /dev/vdc
> 2014-05-21 17:23:24 mkfs -t ext4 -q /dev/vdb
> 2014-05-21 17:23:24 mkfs -t ext4 -q /dev/vda
> 2014-05-21 17:23:24 mkfs -t ext4 -q /dev/vdd
> [   46.936443] random: nonblocking pool is initialized
> 2014-05-21 17:34:51 mount -t ext4 /dev/vda /fs/vda
> [  718.720436] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null)
> 2014-05-21 17:34:51 mount -t ext4 /dev/vdb /fs/vdb
> [  718.740056] EXT4-fs (vdb): mounted filesystem with ordered data mode. Opts: (null)
> 2014-05-21 17:34:51 mount -t ext4 /dev/vdc /fs/vdc
> [  718.757160] EXT4-fs (vdc): mounted filesystem with ordered data mode. Opts: (null)
> 2014-05-21 17:34:51 mount -t ext4 /dev/vdd /fs/vdd
> [  718.773281] EXT4-fs (vdd): mounted filesystem with ordered data mode. Opts: (null)
> run: pre-test
> [  720.524136] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null)
> [  724.032155] EXT4-fs (vdd): mounted filesystem with ordered data mode. Opts: acl,user_xattr
> [  725.907416] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: acl,user_xattr
> [  728.625269] EXT4-fs (vdd): mounted filesystem without journal. Opts: acl,user_xattr,noload
> [  729.053064] ------------[ cut here ]------------
> [  729.053181] kernel BUG at drivers/block/virtio_blk.c:166!
> [  729.053181] invalid opcode: 0000 [#1] SMP 
> [  729.053181] Modules linked in: ext4 mbcache jbd2 dm_mod fuse sg sr_mod cdrom ata_generic pata_acpi floppy parport_pc snd_pcm parport snd_timer cirrus syscopyarea sysfillrect snd sysimgblt ttm drm_kms_helper soundcore drm pcspkr ata_piix libata i2c_piix4
> [  729.053181] CPU: 0 PID: 1645 Comm: kworker/0:1H Not tainted 3.15.0-rc5-next-20140521 #1
> [  729.053181] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
> [  729.053181] task: ffff880119add880 ti: ffff880103264000 task.ti: ffff880103264000
> [  729.053181] RIP: 0010:[<ffffffff81425b27>]  [<ffffffff81425b27>] virtio_queue_rq+0x217/0x220
> [  729.053181] RSP: 0018:ffff880103265d58  EFLAGS: 00010202
> [  729.053181] RAX: 0000000000000081 RBX: ffff880116164900 RCX: dead000000200200
> [  729.053181] RDX: 0000000000007530 RSI: ffff8800a16c4800 RDI: ffff8800a1693400
> [  729.053181] RBP: ffff880103265d98 R08: ffff8800a16c4800 R09: ffff880103265dc8
> [  729.053181] R10: dffd025bd0493448 R11: 0000000000001000 R12: ffff8800a16c4800
> [  729.053181] R13: ffff880103265dc8 R14: 0000000110000001 R15: ffff8800a1693400
> [  729.053181] FS:  0000000000000000(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000
> [  729.053181] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> [  729.053181] CR2: 000000000225a000 CR3: 000000008fc00000 CR4: 00000000000006f0
> [  729.053181] Stack:
> [  729.053181]  ffff880103265d80 ffffffff810a7295 ffff8800a16c4970 ffff8800a1559680
> [  729.053181]  ffff8800a1693400 ffff880103265dc8 ffff8800a16c4800 ffff8800a14e1280
> [  729.053181]  ffff880103265e00 ffffffff812e0335 ffff8800a1693408 ffff8800a1559680
> [  729.053181] Call Trace:
> [  729.053181]  [<ffffffff810a7295>] ? set_next_entity+0x95/0xb0
> [  729.053181]  [<ffffffff812e0335>] __blk_mq_run_hw_queue+0x245/0x410
> [  729.053181]  [<ffffffff812e0772>] blk_mq_run_work_fn+0x12/0x20
> [  729.053181]  [<ffffffff810893b3>] process_one_work+0x183/0x490
> [  729.053181]  [<ffffffff81089b7d>] worker_thread+0x11d/0x5c0
> [  729.053181]  [<ffffffff81089a60>] ? rescuer_thread+0x3a0/0x3a0
> [  729.053181]  [<ffffffff81090832>] kthread+0xd2/0xf0
> [  729.053181]  [<ffffffff81090760>] ? kthread_create_on_node+0x180/0x180
> [  729.053181]  [<ffffffff8175e47c>] ret_from_fork+0x7c/0xb0
> [  729.053181]  [<ffffffff81090760>] ? kthread_create_on_node+0x180/0x180
> [  729.053181] Code: 00 00 00 00 0f b7 86 f4 00 00 00 c7 86 78 01 00 00 02 00 00 00 48 c7 86 80 01 00 00 00 00 00 00 89 86 7c 01 00 00 e9 6f fe ff ff <0f> 0b 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 41 
> [  729.053181] RIP  [<ffffffff81425b27>] virtio_queue_rq+0x217/0x220
> [  729.053181]  RSP <ffff880103265d58>
> [  729.053181] ------------[ cut here ]------------
> [  729.053181] kernel BUG at arch/x86/mm/pageattr.c:216!
> [  729.053181] invalid opcode: 0000 [#2] SMP 
> [  729.053181] Modules linked in: ext4 mbcache jbd2 dm_mod fuse sg sr_mod cdrom ata_generic pata_acpi floppy parport_pc snd_pcm parport snd_timer cirrus syscopyarea sysfillrect snd sysimgblt ttm drm_kms_helper soundcore drm pcspkr ata_piix libata i2c_piix4
> [  729.053181] CPU: 0 PID: 1645 Comm: kworker/0:1H Not tainted 3.15.0-rc5-next-20140521 #1
> [  729.053181] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
> [  729.053181] task: ffff880119add880 ti: ffff880103264000 task.ti: ffff880103264000
> [  729.053181] RIP: 0010:[<ffffffff8105bb63>]  [<ffffffff8105bb63>] change_page_attr_set_clr+0x433/0x440
> [  729.053181] RSP: 0018:ffff880103265188  EFLAGS: 00010046
> [  729.053181] RAX: 0000000000000046 RBX: 0000000000000000 RCX: 0000000000000010
> [  729.053181] RDX: 0000000000002200 RSI: 0000000000000000 RDI: 0000000080000000
> [  729.053181] RBP: ffff880103265218 R08: 8000000071505163 R09: 0000000000071505
> [  729.053181] R10: ffffea0001fd3000 R11: ffffffff812ff239 R12: 0000000000000000
> [  729.053181] R13: 0000000000000010 R14: 0000000000000004 R15: 0000000000000005
> [  729.053181] FS:  0000000000000000(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000
> [  729.053181] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> [  729.053181] CR2: 000000000225a000 CR3: 0000000001aec000 CR4: 00000000000006f0
> [  729.053181] Stack:
> [  729.053181]  ffff8801032651c8 0000000000000000 0000000000000000 0000000000000200
> [  729.053181]  0000000000000008 0000000000000000 0000000000000000 0000000000000010
> [  729.053181]  0000000000000000 0000000500000001 0000000000071505 0000020000000000
> [  729.053181] Call Trace:
> [  729.053181]  [<ffffffff8105beb6>] _set_pages_array+0xe6/0x130
> [  729.053181]  [<ffffffff8105bf33>] set_pages_array_wc+0x13/0x20
> [  729.053181]  [<ffffffffa00c512f>] ttm_set_pages_caching+0x2f/0x70 [ttm]
> [  729.053181]  [<ffffffffa00c5274>] ttm_alloc_new_pages.isra.6+0xb4/0x180 [ttm]
> [  729.053181]  [<ffffffffa00c5b63>] ttm_pool_populate+0x3c3/0x4d0 [ttm]
> [  729.053181]  [<ffffffffa010b20e>] cirrus_ttm_tt_populate+0xe/0x10 [cirrus]
> [  729.053181]  [<ffffffffa00c2681>] ttm_bo_move_memcpy+0x5d1/0x680 [ttm]
> [  729.053181]  [<ffffffff8118ba7e>] ? map_vm_area+0x2e/0x40
> [  729.053181]  [<ffffffffa00be289>] ? ttm_tt_init+0x69/0xb0 [ttm]
> [  729.053181]  [<ffffffffa010b1b8>] cirrus_bo_move+0x18/0x20 [cirrus]
> [  729.053181]  [<ffffffffa00bfe15>] ttm_bo_handle_move_mem+0x265/0x5b0 [ttm]
> [  729.053181]  [<ffffffffa00c0776>] ? ttm_bo_mem_space+0x116/0x340 [ttm]
> [  729.053181]  [<ffffffffa00c0e3f>] ttm_bo_validate+0x21f/0x230 [ttm]
> [  729.053181]  [<ffffffffa010b9a2>] cirrus_bo_push_sysram+0x82/0xe0 [cirrus]
> [  729.053181]  [<ffffffffa0109be5>] cirrus_crtc_do_set_base.isra.8.constprop.10+0x75/0x400 [cirrus]
> [  729.053181]  [<ffffffffa010a3b9>] cirrus_crtc_mode_set+0x449/0x4d0 [cirrus]
> [  729.053181]  [<ffffffffa00da8b9>] drm_crtc_helper_set_mode+0x2b9/0x500 [drm_kms_helper]
> [  729.053181]  [<ffffffffa00db63f>] drm_crtc_helper_set_config+0x87f/0xae0 [drm_kms_helper]
> [  729.053181]  [<ffffffffa007ff31>] drm_mode_set_config_internal+0x61/0xe0 [drm]
> [  729.053181]  [<ffffffffa00ddd54>] drm_fb_helper_pan_display+0x94/0xf0 [drm_kms_helper]
> [  729.053181]  [<ffffffff81362c29>] fb_pan_display+0xc9/0x190
> [  729.053181]  [<ffffffff8135ce80>] bit_update_start+0x20/0x50
> [  729.053181]  [<ffffffff8135c932>] fbcon_switch+0x3a2/0x550
> [  729.053181]  [<ffffffff813d3fe9>] redraw_screen+0x189/0x240
> [  729.053181]  [<ffffffff81362f9e>] ? fb_blank+0x9e/0xc0
> [  729.053181]  [<ffffffff81359eda>] fbcon_blank+0x20a/0x2d0
> [  729.053181]  [<ffffffff810c846c>] ? wake_up_klogd+0x3c/0x50
> [  729.053181]  [<ffffffff810c8678>] ? console_unlock+0x1f8/0x440
> [  729.053181]  [<ffffffff810c8c80>] ? vprintk_emit+0x3c0/0x570
> [  729.053181]  [<ffffffff81078fb3>] ? __internal_add_timer+0x113/0x130
> [  729.053181]  [<ffffffff81078fff>] ? internal_add_timer+0x2f/0x70
> [  729.053181]  [<ffffffff8107b032>] ? mod_timer+0x142/0x1f0
> [  729.053181]  [<ffffffff813d4b08>] do_unblank_screen+0xb8/0x200
> [  729.053181]  [<ffffffff813d4c60>] unblank_screen+0x10/0x20
> [  729.053181]  [<ffffffff8130dea9>] bust_spinlocks+0x19/0x40
> [  729.053181]  [<ffffffff81017ac8>] oops_end+0x38/0x150
> [  729.053181]  [<ffffffff81017eeb>] die+0x4b/0x70
> [  729.053181]  [<ffffffff81013f48>] do_trap+0xa8/0x170
> [  729.053181]  [<ffffffff81014a52>] do_invalid_op+0xa2/0x100
> [  729.053181]  [<ffffffff81425b27>] ? virtio_queue_rq+0x217/0x220
> [  729.053181]  [<ffffffff8175feee>] invalid_op+0x1e/0x30
> [  729.053181]  [<ffffffff81425b27>] ? virtio_queue_rq+0x217/0x220
> [  729.053181]  [<ffffffff810a7295>] ? set_next_entity+0x95/0xb0
> [  729.053181]  [<ffffffff812e0335>] __blk_mq_run_hw_queue+0x245/0x410
> [  729.053181]  [<ffffffff812e0772>] blk_mq_run_work_fn+0x12/0x20
> [  729.053181]  [<ffffffff810893b3>] process_one_work+0x183/0x490
> [  729.053181]  [<ffffffff81089b7d>] worker_thread+0x11d/0x5c0
> [  729.053181]  [<ffffffff81089a60>] ? rescuer_thread+0x3a0/0x3a0
> [  729.053181]  [<ffffffff81090832>] kthread+0xd2/0xf0
> [  729.053181]  [<ffffffff81090760>] ? kthread_create_on_node+0x180/0x180
> [  729.053181]  [<ffffffff8175e47c>] ret_from_fork+0x7c/0xb0
> [  729.053181]  [<ffffffff81090760>] ? kthread_create_on_node+0x180/0x180
> [  729.053181] Code: ff ff 48 8b 4d 80 e9 9f fc ff ff 0f 0b 0f 0b be ba 00 00 00 48 c7 c7 c8 a8 9d 81 89 4d 80 e8 a5 15 01 00 8b 4d 80 e9 04 ff ff ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 
> [  729.053181] RIP  [<ffffffff8105bb63>] change_page_attr_set_clr+0x433/0x440
> [  729.053181]  RSP <ffff880103265188>
> [  729.053181] ---[ end trace b06dd3eed1344db5 ]---
> [  729.053181] Kernel panic - not syncing: Fatal exception
> [  729.053181] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff)
> [  729.053181] drm_kms_helper: panic occurred, switching back to text console
> [  729.053181] Rebooting in 10 seconds..
> Elapsed time: 735
> numactl --preferred=5 --physcpubind=24-27 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/x86_64-rhel/18e072998c67e985aaa643ca1af3e6a0dc133b71/vmlinuz-3.15.0-rc5-next-20140521 -append 'user=lkp job=/lkp/scheduled/vpx-6/cyclic_xfstests-ext4-4HDD-ext4-ext4-HEAD-18e072998c67e985aaa643ca1af3e6a0dc133b71.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/18e072998c67e985aaa643ca1af3e6a0dc133b71/vmlinuz-3.15.0-rc5-next-20140521 kconfig=x86_64-rhel commit=18e072998c67e985aaa643ca1af3e6a0dc133b71 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 bm_initrd=/lkp/benchmarks/xfstests.cgz modules_initrd=/kernel/x86_64-rhel/18e072998c67e985aaa643ca1af3e6a0dc133b71/modules.cgz max_uptime=3288 RESULT_ROOT=/result/vpx/xfstests/4HDD-ext4-ext4/x86_64-rhel/18e072998c67e985aaa643ca1af3e6a0dc133b71/0 ip=::::vpx-6::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal'  -initrd /fs/sdg1/initrd-vpx-6 -m 4096 -smp 4 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/sdg1/disk0-vpx-6,media=disk,if=virtio -drive file=/fs/sdg1/disk1-vpx-6,media=disk,if=virtio -drive file=/fs/sdg1/disk2-vpx-6,media=disk,if=virtio -drive file=/fs/sdg1/disk3-vpx-6,media=disk,if=virtio -drive file=/fs/sdg1/disk4-vpx-6,media=disk,if=virtio -drive file=/fs/sdg1/disk5-vpx-6,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vpx-6 -serial file:/dev/shm/kboot/serial-vpx-6 -daemonize -display none -monitor null 
>
> --- End Message ---