Re: [PATCH v4 0/2] i2c: sunxi: add P2WI controller support

From: Boris BREZILLON
Date: Tue May 27 2014 - 07:45:56 EST


Hello Wolfram,

No news from you regarding this patch series.

Is there anything you want me to fix ?

Otherwise It would be great to have this series merged, because the PMIC
used on Allwinner's A31 boards are connected through this P2WI bus.

Best Regards,

Boris

On 10/05/2014 11:46, Boris BREZILLON wrote:
> Hello,
>
> This series adds support for the P2WI block used by some Allwinner
> boards to interface with the AXP221 PMIC.
>
> Best Regards,
>
> Boris
>
> Changes since v3:
> - update the DT bindings doc
> - fix a comment that was no longer true
>
> Changes since v2:
> - drop the initialization (switch from I2C to P2WI mode) part
> - print devm_ioremap_resource err code
>
> Changes since v1:
> - implement P2WI initilization
> - implement P2WI bus frequency configuration
> - implement address consistency check
> - fix devm_request_and_ioremap return check
> - rework the macro definitions
> - fix typos
>
> [1] http://www.spinics.net/lists/linux-i2c/msg15066.html
> [2] http://comments.gmane.org/gmane.comp.hardware.netbook.arm.sunxi/8947
> Boris BREZILLON (2):
> i2c: sunxi: add P2WI DT bindings documentation
> i2c: sunxi: add P2WI (Push/Pull 2 Wire Interface) controller support
>
> .../devicetree/bindings/i2c/i2c-sunxi-p2wi.txt | 41 +++
> drivers/i2c/busses/Kconfig | 12 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-sun6i-p2wi.c | 349 +++++++++++++++++++++
> 4 files changed, 403 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt
> create mode 100644 drivers/i2c/busses/i2c-sun6i-p2wi.c
>

--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/