[PATCH] extcon: Reorder the sequence of extcon device driver alphabetically

[Chanwoo Choi]

This patch reorder the sequence of extcon device diver alphabetically
to imporbe readability.

Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
---
 drivers/extcon/Kconfig  | 28 ++++++++++++++--------------
 drivers/extcon/Makefile |  6 +++---
 2 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index aebde48..9125eba 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -14,6 +14,20 @@ if EXTCON
 
 comment "Extcon Device Drivers"
 
+config EXTCON_ADC_JACK
+	tristate "ADC Jack extcon support"
+	depends on IIO
+	help
+	  Say Y here to enable extcon device driver based on ADC values.
+
+config EXTCON_ARIZONA
+	tristate "Wolfson Arizona EXTCON support"
+	depends on MFD_ARIZONA && INPUT && SND_SOC
+	help
+	  Say Y here to enable support for external accessory detection
+	  with Wolfson Arizona devices. These are audio CODECs with
+	  advanced audio accessory detection support.
+
 config EXTCON_GPIO
 	tristate "GPIO extcon support"
 	depends on GPIOLIB
@@ -21,12 +35,6 @@ config EXTCON_GPIO
 	  Say Y here to enable GPIO based extcon support. Note that GPIO
 	  extcon supports single state per extcon instance.
 
-config EXTCON_ADC_JACK
-	tristate "ADC Jack extcon support"
-	depends on IIO
-	help
-	  Say Y here to enable extcon device driver based on ADC values.
-
 config EXTCON_MAX14577
 	tristate "MAX14577/77836 EXTCON Support"
 	depends on MFD_MAX14577
@@ -55,14 +63,6 @@ config EXTCON_MAX8997
 	  Maxim MAX8997 PMIC. The MAX8997 MUIC is a USB port accessory
 	  detector and switch.
 
-config EXTCON_ARIZONA
-	tristate "Wolfson Arizona EXTCON support"
-	depends on MFD_ARIZONA && INPUT && SND_SOC
-	help
-	  Say Y here to enable support for external accessory detection
-	  with Wolfson Arizona devices. These are audio CODECs with
-	  advanced audio accessory detection support.
-
 config EXTCON_PALMAS
 	tristate "Palmas USB EXTCON support"
 	depends on MFD_PALMAS
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
index bf7861e..e48abc6 100644
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -1,12 +1,12 @@
-#
+
 # Makefile for external connector class (extcon) devices
 #
 
 obj-$(CONFIG_EXTCON)		+= extcon-class.o
-obj-$(CONFIG_EXTCON_GPIO)	+= extcon-gpio.o
 obj-$(CONFIG_EXTCON_ADC_JACK)	+= extcon-adc-jack.o
+obj-$(CONFIG_EXTCON_ARIZONA)	+= extcon-arizona.o
+obj-$(CONFIG_EXTCON_GPIO)	+= extcon-gpio.o
 obj-$(CONFIG_EXTCON_MAX14577)	+= extcon-max14577.o
 obj-$(CONFIG_EXTCON_MAX77693)	+= extcon-max77693.o
 obj-$(CONFIG_EXTCON_MAX8997)	+= extcon-max8997.o
-obj-$(CONFIG_EXTCON_ARIZONA)	+= extcon-arizona.o
 obj-$(CONFIG_EXTCON_PALMAS)	+= extcon-palmas.o
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/