Re: [Patch V3 19/37] x86, irq: introduce mechanisms to support dynamically allocate IRQ for IOAPIC

[Sebastian Andrzej Siewior]

On 05/27/2014 09:58 PM, Thomas Gleixner wrote:
> ce4100 is an oddball though. The ioapic is registered way before the
> interrupt subsystem is initialized and I have a hard time to
> understand that comment:
> 
>         /* We can't set this earlier, because we need to calibrate the timer */
>         legacy_pic = &null_legacy_pic;
> 
> The timer calibration happens after the interrupts are set up. I
> assume it's check_timer() which wants that, but we know exactly how
> the ce4100 works, so we might be able to avoid that whole "testing"
> stuff. Sebastian, any input on this?

According to my memory there was some PIC init we need but I don't
recall the details. However, booting the system with "legacy_pic =
&null_legacy_pic;" in x86_ce4100_early_setup() gives me this:

[    0.001000] Enabling APIC mode:  Flat.  Using 2 I/O APICs
[    0.001000] leaving PIC mode, enabling APIC mode.
[    0.001000] enabled ExtINT on CPU#0
[    0.001000] ENABLING IO-APIC IRQs
[    0.001000] Setting 1 in the phys_id_present_map
[    0.001000] ...changing IO-APIC physical APIC ID to 1 ... ok.
[    0.001000] Setting 2 in the phys_id_present_map
[    0.001000] ...changing IO-APIC physical APIC ID to 2 ... ok.
[    0.001000] smpboot: CPU0: Intel(R) Atom(TM) CPU CE4150   @ 1.20GHz
(fam: 06, model: 1c, stepping: 0a)
[    0.001000] Using local APIC timer interrupts.
[    0.001000] calibrating APIC timer ...

and we stand still. With the assignment as it is now:

[    0.001000] Enabling APIC mode:  Flat.  Using 2 I/O APICs
[    0.001000] leaving PIC mode, enabling APIC mode.
[    0.001000] enabled ExtINT on CPU#0
[    0.002312] ENABLING IO-APIC IRQs
[    0.003009] Setting 1 in the phys_id_present_map
[    0.004007] ...changing IO-APIC physical APIC ID to 1 ... ok.
[    0.005533] Setting 2 in the phys_id_present_map
[    0.006006] ...changing IO-APIC physical APIC ID to 2 ... ok.
[    0.008373] ..TIMER: vector=0x30 apic1=-1 pin1=-1 apic2=-1 pin2=-1
[    0.009000] ...trying to set up timer as Virtual Wire IRQ...
[    0.019490] ..... works.
[    0.020005] smpboot: CPU0: Intel(R) Atom(TM) CPU CE4150   @ 1.20GHz
(fam: 06, model: 1c, stepping: 0a)
[    0.024005] Using local APIC timer interrupts.
[    0.024005] calibrating APIC timer ...
[    0.026000] ... lapic delta = 624992
[    0.026000] ... PM-Timer delta = 0
[    0.026000] ..... delta 624992
[    0.026000] ..... mult: 26843202
[    0.026000] ..... calibration result: 99998
[    0.026000] ..... CPU clock speed is 1199.0984 MHz.
[    0.026000] ..... host bus clock speed is 99.0998 MHz.
[    0.026000] ... verify APIC timer
[    0.128565] ... jiffies delta = 100
[    0.129004] ... jiffies result ok

and it goes on. As you see, "..TIMER:" is missing in the upper output.

> 
> Thanks,
> 
> 	tglx

Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/