[PATCH 3/5] regulator: axp20x: Update the bindings to use a local parent regulator
From: Maxime Ripard
Date: Wed May 28 2014 - 13:12:33 EST
Since the regulator core is now able to handle parent regulators that are tied
to the regulator nodes themselves instead of the parent device in the DT,
update the bindings and the regulator code to use a vin-supply property for
each regulator.
Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/mfd/axp20x.txt | 22 +++++--------
drivers/regulator/axp20x-regulator.c | 42 ++++++++++++++----------
2 files changed, 34 insertions(+), 30 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
index cc9e01b32715..b21164f882ef 100644
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -11,12 +11,6 @@ Required properties:
- interrupts: Interrupt specifiers for interrupt sources
- interrupt-controller: axp20x has its own internal IRQs
- #interrupt-cells: Should be set to 1
-- acin-supply: The input supply for LDO1
-- vin2-supply: The input supply for DCDC2
-- vin3-supply: The input supply for DCDC3
-- ldo24in-supply: The input supply for LDO2, LDO4
-- ldo3in-supply: The input supply for LDO3
-- ldo5in-supply: The input supply for LDO5
- regulators: A node that houses a sub-node for each regulator. The regulators are
bound using their name as listed here: dcdc2, dcdc3, ldo1, ldo2,
@@ -24,6 +18,8 @@ Required properties:
device can be found in:
Documentation/devicetree/bindings/regulator/regulator.txt with
the exception of x-powers,dcdc-freq
+ Parent regulators must be set in the vin-supply property
+
- x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz
(range: 750-1875). Default: 1.5MHz
@@ -42,49 +38,49 @@ axp209: pmic@34 {
interrupt-controller;
#interrupt-cells = <1>;
- acin-supply = <&axp_ipsout_reg>;
- vin2-supply = <&axp_ipsout_reg>;
- vin3-supply = <&axp_ipsout_reg>;
- ldo24in-supply = <&axp_ipsout_reg>;
- ldo3in-supply = <&axp_ipsout_reg>;
- ldo5in-supply = <&axp_ipsout_reg>;
-
regulators {
x-powers,dcdc-freq = <1500>;
axp_vcore_reg: dcdc2 {
+ vin-supply = <&axp_ipsout_reg>;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <2275000>;
regulator-always-on;
};
axp_ddr_reg: dcdc3 {
+ vin-supply = <&axp_ipsout_reg>;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <3500000>;
regulator-always-on;
};
axp_rtc_reg: ldo1 {
+ vin-supply = <&axp_ipsout_reg>;
regulator-always-on;
};
axp_analog_reg: ldo2 {
+ vin-supply = <&axp_ipsout_reg>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
axp_pll_reg: ldo3 {
+ vin-supply = <&axp_ipsout_reg>;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <3500000>;
};
axp_hdmi_reg: ldo4 {
+ vin-supply = <&axp_ipsout_reg>;
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
axp_mic_reg: ldo5 {
+ vin-supply = <&axp_ipsout_reg>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 78a29e60f53a..0a260df50314 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -22,6 +22,7 @@
#include <linux/regmap.h>
#include <linux/mfd/axp20x.h>
#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#define AXP20X_IO_ENABLED 0x03
@@ -32,11 +33,10 @@
#define AXP20X_FREQ_DCDC_MASK 0x0f
-#define AXP20X_DESC_IO(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg, \
+#define AXP20X_DESC_IO(_id, _min, _max, _step, _vreg, _vmask, _ereg, \
_emask, _enable_val, _disable_val) \
[AXP20X_##_id] = { \
.name = #_id, \
- .supply_name = (_supply), \
.type = REGULATOR_VOLTAGE, \
.id = AXP20X_##_id, \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
@@ -52,11 +52,9 @@
.ops = &axp20x_ops, \
}
-#define AXP20X_DESC(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg, \
- _emask) \
+#define AXP20X_DESC(_id, _min, _max, _step, _vreg, _vmask, _ereg, _emask) \
[AXP20X_##_id] = { \
.name = #_id, \
- .supply_name = (_supply), \
.type = REGULATOR_VOLTAGE, \
.id = AXP20X_##_id, \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
@@ -70,10 +68,9 @@
.ops = &axp20x_ops, \
}
-#define AXP20X_DESC_FIXED(_id, _supply, _volt) \
+#define AXP20X_DESC_FIXED(_id, _volt) \
[AXP20X_##_id] = { \
.name = #_id, \
- .supply_name = (_supply), \
.type = REGULATOR_VOLTAGE, \
.id = AXP20X_##_id, \
.n_voltages = 1, \
@@ -82,10 +79,9 @@
.ops = &axp20x_ops_fixed \
}
-#define AXP20X_DESC_TABLE(_id, _supply, _table, _vreg, _vmask, _ereg, _emask) \
+#define AXP20X_DESC_TABLE(_id, _table, _vreg, _vmask, _ereg, _emask) \
[AXP20X_##_id] = { \
.name = #_id, \
- .supply_name = (_supply), \
.type = REGULATOR_VOLTAGE, \
.id = AXP20X_##_id, \
.n_voltages = ARRAY_SIZE(_table), \
@@ -126,18 +122,18 @@ static struct regulator_ops axp20x_ops = {
};
static const struct regulator_desc axp20x_regulators[] = {
- AXP20X_DESC(DCDC2, "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f,
+ AXP20X_DESC(DCDC2, 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f,
AXP20X_PWR_OUT_CTRL, 0x10),
- AXP20X_DESC(DCDC3, "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT, 0x7f,
+ AXP20X_DESC(DCDC3, 700, 3500, 25, AXP20X_DCDC3_V_OUT, 0x7f,
AXP20X_PWR_OUT_CTRL, 0x02),
- AXP20X_DESC_FIXED(LDO1, "acin", 1300),
- AXP20X_DESC(LDO2, "ldo24in", 1800, 3300, 100, AXP20X_LDO24_V_OUT, 0xf0,
+ AXP20X_DESC_FIXED(LDO1, 1300),
+ AXP20X_DESC(LDO2, 1800, 3300, 100, AXP20X_LDO24_V_OUT, 0xf0,
AXP20X_PWR_OUT_CTRL, 0x04),
- AXP20X_DESC(LDO3, "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f,
+ AXP20X_DESC(LDO3, 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f,
AXP20X_PWR_OUT_CTRL, 0x40),
- AXP20X_DESC_TABLE(LDO4, "ldo24in", axp20x_ldo4_data, AXP20X_LDO24_V_OUT, 0x0f,
+ AXP20X_DESC_TABLE(LDO4, axp20x_ldo4_data, AXP20X_LDO24_V_OUT, 0x0f,
AXP20X_PWR_OUT_CTRL, 0x08),
- AXP20X_DESC_IO(LDO5, "ldo5in", 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0,
+ AXP20X_DESC_IO(LDO5, 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0,
AXP20X_GPIO0_CTRL, 0x07, AXP20X_IO_ENABLED,
AXP20X_IO_DISABLED),
};
@@ -181,7 +177,8 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
static int axp20x_regulator_parse_dt(struct platform_device *pdev)
{
struct device_node *np, *regulators;
- int ret;
+ struct device_node *child;
+ int ret, i;
u32 dcdcfreq;
np = of_node_get(pdev->dev.parent->of_node);
@@ -207,6 +204,17 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev)
return ret;
}
+ for_each_child_of_node(regulators, child) {
+ for (i = 0; i < ARRAY_SIZE(axp20x_matches); i++) {
+ struct of_regulator_match *match = &axp20x_matches[i];
+ if (!match->of_node)
+ continue;
+
+ if (of_get_property(child, "vin-supply", NULL))
+ match->init_data->supply_regulator = "vin";
+ }
+ }
+
of_node_put(regulators);
}
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/