[PATCH 3.10 53/86] tg3: update rx_jumbo_pending ring param only when jumbo frames are enabled

From: Greg Kroah-Hartman
Date: Thu May 29 2014 - 00:51:21 EST


3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ivan Vecera <ivecera@xxxxxxxxxx>

The patch fixes a problem with dropped jumbo frames after usage of
'ethtool -G ... rx'.

Scenario:
1. ip link set eth0 up
2. ethtool -G eth0 rx N # <- This zeroes rx-jumbo
3. ip link set mtu 9000 dev eth0

The ethtool command set rx_jumbo_pending to zero so any received jumbo
packets are dropped and you need to use 'ethtool -G eth0 rx-jumbo N'
to workaround the issue.
The patch changes the logic so rx_jumbo_pending value is changed only if
jumbo frames are enabled (MTU > 1500).

Signed-off-by: Ivan Vecera <ivecera@xxxxxxxxxx>
Acked-by: Michael Chan <mchan@xxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/broadcom/tg3.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -12073,7 +12073,9 @@ static int tg3_set_ringparam(struct net_
if (tg3_flag(tp, MAX_RXPEND_64) &&
tp->rx_pending > 63)
tp->rx_pending = 63;
- tp->rx_jumbo_pending = ering->rx_jumbo_pending;
+
+ if (tg3_flag(tp, JUMBO_RING_ENABLE))
+ tp->rx_jumbo_pending = ering->rx_jumbo_pending;

for (i = 0; i < tp->irq_max; i++)
tp->napi[i].tx_pending = ering->tx_pending;


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/