[PATCH v4 01/11] drm: sti: add bindings for DRM driver

[Benjamin Gaignard]

Add DRM/KMS driver bindings documentation.
Describe the required properties for each of the hardware IPs drivers.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
---
 .../devicetree/bindings/gpu/st,stih4xx.txt         | 189 +++++++++++++++++++++
 1 file changed, 189 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpu/st,stih4xx.txt

diff --git a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
new file mode 100644
index 0000000..59a59a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
@@ -0,0 +1,189 @@
+STMicroelectronics stih4xx platforms
+
+- sti-vtg: video timing generator
+  Required properties:
+  - compatible: "st,vtg"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  Optional properties:
+  - interrupts : VTG interrupt number to the CPU.
+  - st,slave: phandle on a slave vtg
+
+- sti-vtac: video timing advanced inter dye communication Rx and TX
+  Required properties:
+  - compatible: "st,vtac-main" or "st,vtac-aux"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+
+- sti-display-subsystem: Master device for DRM sub-components
+  This device must be the parent of all the sub-components and is responsible
+  of bind them.
+  Required properties:
+  - compatible: "st,sti-display-subsystem"
+  - ranges: to allow probing of subdevices
+
+- sti-compositor: frame compositor engine
+  must be a child of sti-display-subsystem
+  Required properties:
+  - compatible: "st,stih<chip>-compositor"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+  - resets: resets to be used by the device
+    See ../reset/reset.txt for details.
+  - reset-names: names of the resets listed in resets property in the same
+    order.
+  - st,vtg: phandle(s) on vtg device (main and aux) nodes.
+
+- sti-tvout: video out hardware block
+  must be a child of sti-display-subsystem
+  Required properties:
+  - compatible: "st,stih<chip>-tvout"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - reg-names: names of the mapped memory regions listed in regs property in
+    the same order.
+  - resets: resets to be used by the device
+    See ../reset/reset.txt for details.
+  - reset-names: names of the resets listed in resets property in the same
+    order.
+  - ranges: to allow probing of subdevices
+
+- sti-hdmi: hdmi output block
+  must be a child of sti-tvout
+  Required properties:
+  - compatible: "st,stih<chip>-hdmi";
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - reg-names: names of the mapped memory regions listed in regs property in
+    the same order.
+  - interrupts : HDMI interrupt number to the CPU.
+  - interrupt-names: name of the interrupts listed in interrupts property in
+    the same order
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+  - hdmi,hpd-gpio: gpio id to detect if an hdmi cable is plugged or not.
+
+sti-hda:
+  Required properties:
+  must be a child of sti-tvout
+  - compatible: "st,stih<chip>-hda"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - reg-names: names of the mapped memory regions listed in regs property in
+    the same order.
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+
+Example:
+
+/ {
+	...
+
+	vtg_main_slave: sti-vtg-main-slave@fe85A800 {
+		compatible	= "st,vtg";
+		reg		= <0xfe85A800 0x300>;
+		interrupts	= <GIC_SPI 175 IRQ_TYPE_NONE>;
+	};
+
+	vtg_main: sti-vtg-main-master@fd348000 {
+		compatible	= "st,vtg";
+		reg		= <0xfd348000 0x400>;
+		st,slave	= <&vtg_main_slave>;
+	};
+
+	vtg_aux_slave: sti-vtg-aux-slave@fd348400 {
+		compatible	= "st,vtg";
+		reg		= <0xfe858200 0x300>;
+		interrupts	= <GIC_SPI 176 IRQ_TYPE_NONE>;
+	};
+
+	vtg_aux: sti-vtg-aux-master@fd348400 {
+		compatible	= "st,vtg";
+		reg		= <0xfd348400 0x400>;
+		st,slave	= <&vtg_aux_slave>;
+	};
+
+
+	sti-vtac-rx-main@fee82800 {
+		compatible	= "st,vtac-main";
+		reg		= <0xfee82800 0x200>;
+		clock-names     = "vtac";
+		clocks          = <&CLK_M_A2_DIV0 CLK_M_VTAC_MAIN_PHY>;
+	};
+
+	sti-vtac-rx-aux@fee82a00 {
+		compatible	= "st,vtac-aux";
+		reg		= <0xfee82a00 0x200>;
+		clock-names     = "vtac";
+		clocks          = <&CLK_M_A2_DIV0 CLK_M_VTAC_AUX_PHY>;
+	};
+
+	sti-vtac-tx-main@fd349000 {
+		compatible	= "st,vtac-main";
+		reg		= <0xfd349000 0x200>, <0xfd320000 0x10000>;
+		clock-names     = "vtac";
+		clocks           = <&CLK_S_A1_HS CLK_S_VTAC_TX_PHY>;
+	};
+
+	sti-vtac-tx-aux@fd349200 {
+		compatible	= "st,vtac-aux";
+		reg		= <0xfd349200 0x200>, <0xfd320000 0x10000>;
+		clock-names     = "vtac";
+		clocks          = <&CLK_S_A1_HS CLK_S_VTAC_TX_PHY>;
+	};
+
+	sti-display-subsystem {
+		compatible = "st,sti-display-subsystem";
+		ranges;
+
+		sti-compositor@fd340000 {
+			compatible	= "st,stih416-compositor";
+			reg		= <0xfd340000 0x1000>;
+			clock-names	= "compo_main", "compo_aux",
+			                  "pix_main", "pix_aux";
+			clocks          = <&CLK_M_A2_DIV1 CLK_M_COMPO_MAIN>, <&CLK_M_A2_DIV1 CLK_M_COMPO_AUX>,
+					  <&CLOCKGEN_C_VCC CLK_S_PIX_MAIN>, <&CLOCKGEN_C_VCC CLK_S_PIX_AUX>;
+			reset-names     = "compo-main", "compo-aux";
+			resets          = <&softreset STIH416_COMPO_M_SOFTRESET>, <&softreset STIH416_COMPO_A_SOFTRESET>;
+			st,vtg		= <&vtg_main>, <&vtg_aux>;
+		};
+
+		sti-tvout@fe000000 {
+			compatible	= "st,stih416-tvout";
+			reg		= <0xfe000000 0x1000>, <0xfe85a000 0x400>, <0xfe830000 0x10000>;
+			reg-names	= "tvout-reg", "hda-reg", "syscfg";
+			reset-names     = "tvout";
+			resets          = <&softreset STIH416_HDTVOUT_SOFTRESET>;
+			ranges;
+
+			sti-hdmi@fe85c000 {
+				compatible	= "st,stih416-hdmi";
+				reg		= <0xfe85c000 0x1000>, <0xfe830000 0x10000>;
+				reg-names	= "hdmi-reg", "syscfg";
+				interrupts	= <GIC_SPI 173 IRQ_TYPE_NONE>;
+				interrupt-names	= "irq";
+				clock-names	= "pix", "tmds", "phy", "audio";
+				clocks          = <&CLOCKGEN_C_VCC CLK_S_PIX_HDMI>, <&CLOCKGEN_C_VCC CLK_S_TMDS_HDMI>, <&CLOCKGEN_C_VCC CLK_S_HDMI_REJECT_PLL>, <&CLOCKGEN_B1 CLK_S_PCM_0>;
+				hdmi,hpd-gpio	= <&PIO2 5>;
+			};
+
+			sti-hda@fe85a000 {
+				compatible	= "st,stih416-hda";
+				reg		= <0xfe85a000 0x400>, <0xfe83085c 0x4>;
+				reg-names	= "hda-reg", "video-dacs-ctrl";
+				clock-names	= "pix", "hddac";
+				clocks          = <&CLOCKGEN_C_VCC CLK_S_PIX_HD>, <&CLOCKGEN_C_VCC CLK_S_HDDAC>;
+			};
+		};
+	};
+	...
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/