[DRBD-user] drbd-0.7.15 crashed doing a full sync under 2.6.13

[Maurice Volaski]

First posted to drbd mailing list on 2/6 with no reply. It hasn't 
happened since, but once is enough to mean something is wrong 
somewhere.....

I did a resize of all the underlying LVMs and that proceeded very
nicely since drbd automatically recognized the new sizes and
resize2fs automatically figured out the new size, too.

Anyway, bringing up the secondary automatically caused the primary to
start a fully sync. The performance this time was very nice,
averaging 50-55 MB per second across a total of 8 drbd resources, all
syncing simultaneously. Each resource is an underlying logical volume
and is assigned its own TCP port in drbd.conf. The primary has dual
bonded gigabit in active load balancing mode and secondary is single
gigabit.

A total of 5600 GB has to be moved. I am estimating the resources
were between 1/3 and 1/2 finished when the kernel panicked.

The secondary, which is running the same kernel and drbd, did not
panic. The drives in both systems are attached via LSI Logic SCSI
cards and on the primary the driver is mptscsih; on the secondary it
is sym53c8xx.

Unfortunately, I never gotten an easy way to capture the text of a
panic, and apparently attachments are excluded if the message exceeds
40K, so I typed out the whole thing:

ne_endio+243}
<ffffffff8029460b.{__end_that_request_first+283}
<ffffffff802d297c.{scsi_end_request+60}
<ffffffff802d2d7b>{scsi_io_completion+651}
<ffffffff802e1eb1>{sd_rw_intr+721}
<ffffffff802d25cf>{scsi_device_unbusy+95}
<ffffffff802cd722>{scsi_softirq+258}
<ffffffff8013b111>{__do_softirq+113}
<ffffffff8010ee63>{call_softirq+31}
<ffffffff80110a55>{do_softirq+53} <ffffffff80119a0f>{do_IRQ+79}
<ffffffff8010e20a>{ret_from_intr+0} <EOI>
<ffffffff880bda221>{:drbd:drbd_bm_clear_bit+497}
<ffffffff880bda21>{:drbd:drbd_bm_clear_bit+497}
<ffffffff880ccc21>{:drbd:__drbd_set_in_sync+545}
<ffffffff880c9140>{:drbd:got_BlockAck+96}
<ffffffff880c9a99>{:drbd:drbd_asender+1081}
<ffffffff880ce526>{:drbd:drbd_thread_setup+190}
<ffffffff8010e91a>{child_rip+8}
<ffffffff880ce460>{:drbd:drbd_thread_setup+0>
<ffffffff8010e912>{child_rip+0}

Code: 80 3b 00 7e f9 e9 89 fb ff ff e8 40 27 ef ff e9 01 fc ff ff
console shuts up...
   <0>Kernel panic --not syncing:Aiee, killing interrupt handler!

keywords: crash, freeze, freezing, hang, hung, panic, locked up,
scsi, thread, threads, interrupt handler, bug, race condition.
-- 

Maurice Volaski, mvolaski@xxxxxxxxxxxx
Computing Support, Rose F. Kennedy Center
Albert Einstein College of Medicine of Yeshiva University
_______________________________________________
drbd-user mailing list
drbd-user@xxxxxxxxxxxxxxxx
http://lists.linbit.com/mailman/listinfo/drbd-user


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/