Re: [PATCH v3 4/7] of: configure the platform device dma parameters

[Santosh Shilimkar]

On Thursday 29 May 2014 03:24 PM, Arnd Bergmann wrote:
> On Thursday 29 May 2014 10:08:10 Santosh Shilimkar wrote:
>> On Thursday 29 May 2014 10:01 AM, Linus Walleij wrote:
>>> On Wed, May 28, 2014 at 4:04 PM, Santosh Shilimkar
>>> <santosh.shilimkar@xxxxxx> wrote:
>>>> On Wednesday 28 May 2014 09:32 AM, Linus Walleij wrote:
>>>
>>>>>> I suspect what you want is
>>>>>>
>>>>>>         dma-ranges = <0x80000000 0 0x80000000>;
>>>>>>
>>>>>> to translate dma_addr_t 0x80000000-0xffffffff to phys_addr_t 0x0-0x7fffffff
>>>>>> rather than phys_addr_t 0x800000000-0x87fffffff.
>>>>>
>>>> Interesting. Where does the ROM address space resides on integrator then considering
>>>> address 0 is used for DMA.
>>>
>>> The ROM is at physical address 0x20000000, don't ask me
>>> why 
>>>
>>> The RAM is typically at 0x00000000-0x0fffffff, on up to four parallell
>>> tiles, i.e. up to four completely independent CPUs are booted off the
>>> same ROM and using a set of shared peripherals.
>>>
>> The reason I asked the question because most of the ARM SOC I came across
>> aren't using the RAM phys address 0 and thought was because of boot architecture
>> with ROM occupying that address with reset vector starting at address 0.
>>
>> That was one of the main reason we had description on max_*pfn on ARM w.r.t
>> to other acrhes.
>>
>> Will corner ARM guys to understand bit more about it in some conference 
> 
> If this is anything like the versatile express, the reason it works is probably
> because there is another microcontroller in the system that does the bootstrap
> and is able to load code into RAM before turning on the main CPU.
> 
That make sense now. Thanks for those extra bits.

Regards,
Santosh

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/