Re: [PATCH v4 03/13] mmc: mmci: Add Qualcomm Id to amba id table

From: Srinivas Kandagatla
Date: Fri May 30 2014 - 05:49:38 EST




On 30/05/14 10:39, Ulf Hansson wrote:
On 28 May 2014 15:46, <srinivas.kandagatla@xxxxxxxxxx> wrote:
From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>

This patch adds a fake Qualcomm ID 0x00051180 to the amba_ids, as Qualcomm
SDCC controller is pl180, but amba id registers read 0x0's.
The plan is to remove SDCC driver totally and use mmci as the main SD
controller driver for Qualcomm SOCs.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/mmc/host/mmci.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index a38e714..86f25a9 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -160,6 +160,14 @@ static struct variant_data variant_ux500v2 = {
.pwrreg_nopower = true,
};

+static struct variant_data variant_qcom = {
+ .fifosize = 16 * 4,
+ .fifohalfsize = 8 * 4,
+ .clkreg = MCI_CLK_ENABLE,
+ .datalength_bits = 24,
+ .pwrreg_powerup = MCI_PWR_UP,
+};
+
static int mmci_card_busy(struct mmc_host *mmc)
{
struct mmci_host *host = mmc_priv(mmc);
@@ -1750,6 +1758,12 @@ static struct amba_id mmci_ids[] = {
.mask = 0xf0ffffff,
.data = &variant_ux500v2,
},
+ /* Qualcomm variants */
+ {
+ .id = 0x00051180,
+ .mask = 0x000fffff,
+ .data = &variant_qcom,
+ },
{ 0, 0 },
};

Shouldn't this patch be moved to very end of this patchset?

If we would apply this patch on it's own - the Qcom variant wouldn't
work, right?
Yes, I would not work. I will move it to the end of the patchset.

Thanks,
srini

Kind regards
Ulf Hansson


--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/