Re: [PATCH 1/2] pci: Add IORESOURCE_BIT entry for PCIe ECAM resources.

From: Arnd Bergmann
Date: Tue Jun 03 2014 - 05:21:59 EST


On Tuesday 03 June 2014 09:44:59 Grant Likely wrote:
> > The reason I think allow an ECAM makes sense in ranges is because it allows for a direct IO read/write to CFG space (w/o any mapping) similar to what one would do for MEM space or IO.
>
> I don't think that's right. PCI addresses are defined as follows:
> phys.hi cell: npt000ss bbbbbbbb dddddfff rrrrrrrr
> phys.mid cell: hhhhhhhh hhhhhhhh hhhhhhhh hhhhhhhh
> phys.low cell: llllllll llllllll llllllll llllllll
>
> where 'ddddd' is the device number (0-31) and 'fff' is the function number (0-7)
>
> Going up by one device number or even function number does not result in
> contiguious address values:
>
> device 0: 0x00000000 00000000 00000000
> device 1: 0x00000800 00000000 00000000
> device 2: 0x00001000 00000000 00000000
> device 3: 0x00001800 00000000 00000000
> ...
> device 30:0x0000f000 00000000 00000000
> device 31:0x0000f800 00000000 00000000
>
> a simple ranges doesn't work transparently because each of those config
> ranges needs to be mapped to a 4k block. I think ranges would need to
> look like this:
>
> ranges = <0x00000000 0 0 0x0ff00000 0x1000>,
> <0x00000800 0 0 0x0ff01000 0x1000>,
> <0x00001800 0 0 0x0ff02000 0x1000>,
> ...
> <0x0000f000 0 0 0x0ff1e000 0x1000>,
> <0x0000f800 0 0 0x0ff1f000 0x1000>;
>
> (I just hacked the above up; I make no claims to it's accuracy for
> actual address values)
>
> But I don't even thing the semantics work there because the address is
> encoded in the phys.hi cell, not the phys.low cell. Incrementing by one
> does not behaves as most bus addresses work. To actually work properly
> we would have needed a way to define a stride of 64bits when
> incrementing config space addresses in a ranges mapping.

Thanks for clearing that up. I always suspected it was roughly this
way, but never managed to think it through completely before getting
distracted by something else.

I wonder if the OF definition matches CAM though, if not ECAM, as
CAM is also limited to 256 byte config space per function.

Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/