[PATCH 3.10 098/103] powerpc: Fix 64 bit builds with binutils 2.24

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@xxxxxxxxxxxx>

commit 7998eb3dc700aaf499f93f50b3d77da834ef9e1d upstream.

With binutils 2.24, various 64 bit builds fail with relocation errors
such as

arch/powerpc/kernel/built-in.o: In function `exc_debug_crit_book3e':
	(.text+0x165ee): relocation truncated to fit: R_PPC64_ADDR16_HI
	against symbol `interrupt_base_book3e' defined in .text section
	in arch/powerpc/kernel/built-in.o
arch/powerpc/kernel/built-in.o: In function `exc_debug_crit_book3e':
	(.text+0x16602): relocation truncated to fit: R_PPC64_ADDR16_HI
	against symbol `interrupt_end_book3e' defined in .text section
	in arch/powerpc/kernel/built-in.o

The assembler maintainer says:

 I changed the ABI, something that had to be done but unfortunately
 happens to break the booke kernel code.  When building up a 64-bit
 value with lis, ori, shl, oris, ori or similar sequences, you now
 should use @high and @higha in place of @h and @ha.  @h and @ha
 (and their associated relocs R_PPC64_ADDR16_HI and R_PPC64_ADDR16_HA)
 now report overflow if the value is out of 32-bit signed range.
 ie. @h and @ha assume you're building a 32-bit value. This is needed
 to report out-of-range -mcmodel=medium toc pointer offsets in @toc@h
 and @toc@ha expressions, and for consistency I did the same for all
 other @h and @ha relocs.

Replacing @h with @high in one strategic location fixes the relocation
errors. This has to be done conditionally since the assembler either
supports @h or @high but not both.

Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Signed-off-by: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 arch/powerpc/Makefile              |    4 +++-
 arch/powerpc/include/asm/ppc_asm.h |    7 ++++++-
 2 files changed, 9 insertions(+), 2 deletions(-)

--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -97,7 +97,9 @@ CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc
 
 CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell)
 
-KBUILD_CPPFLAGS	+= -Iarch/$(ARCH)
+asinstr := $(call as-instr,lis 9$(comma)foo@high,-DHAVE_AS_ATHIGH=1)
+
+KBUILD_CPPFLAGS	+= -Iarch/$(ARCH) $(asinstr)
 KBUILD_AFLAGS	+= -Iarch/$(ARCH)
 KBUILD_CFLAGS	+= -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y)
 CPP		= $(CC) -E $(KBUILD_CFLAGS)
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -390,11 +390,16 @@ n:
  *      ld	rY,ADDROFF(name)(rX)
  */
 #ifdef __powerpc64__
+#ifdef HAVE_AS_ATHIGH
+#define __AS_ATHIGH high
+#else
+#define __AS_ATHIGH h
+#endif
 #define LOAD_REG_IMMEDIATE(reg,expr)		\
 	lis     reg,(expr)@highest;		\
 	ori     reg,reg,(expr)@higher;	\
 	rldicr  reg,reg,32,31;		\
-	oris    reg,reg,(expr)@h;		\
+	oris    reg,reg,(expr)@__AS_ATHIGH;	\
 	ori     reg,reg,(expr)@l;
 
 #define LOAD_REG_ADDR(reg,name)			\


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/