[PATCHv2 6/6] usb: dwc3: host: convey the PHYs to xhci
From: Heikki Krogerus
Date: Thu Jun 05 2014 - 08:53:38 EST
On some platforms a PHY may need to be handled also in the
host controller driver. Exynos5420 SoC requires some "PHY
tuning" based on the USB speed. This patch delivers dwc3's
PHYs to the xhci platform device when it's created.
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Cc: Felipe Balbi <balbi@xxxxxx>
---
drivers/usb/dwc3/host.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 32db328..8387564 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -27,8 +27,7 @@ int dwc3_host_init(struct dwc3 *dwc)
xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
if (!xhci) {
dev_err(dwc->dev, "couldn't allocate xHCI device\n");
- ret = -ENOMEM;
- goto err0;
+ return -ENOMEM;
}
dma_set_coherent_mask(&xhci->dev, dwc->dev->coherent_dma_mask);
@@ -46,22 +45,33 @@ int dwc3_host_init(struct dwc3 *dwc)
goto err1;
}
+ phy_create_lookup(dwc->usb2_generic_phy, "usb2-phy",
+ dev_name(&xhci->dev));
+ phy_create_lookup(dwc->usb3_generic_phy, "usb3-phy",
+ dev_name(&xhci->dev));
+
ret = platform_device_add(xhci);
if (ret) {
dev_err(dwc->dev, "failed to register xHCI device\n");
- goto err1;
+ goto err2;
}
return 0;
-
+err2:
+ phy_remove_lookup(dwc->usb2_generic_phy, "usb2-phy",
+ dev_name(&xhci->dev));
+ phy_remove_lookup(dwc->usb3_generic_phy, "usb3-phy",
+ dev_name(&xhci->dev));
err1:
platform_device_put(xhci);
-
-err0:
return ret;
}
void dwc3_host_exit(struct dwc3 *dwc)
{
+ phy_remove_lookup(dwc->usb2_generic_phy, "usb2-phy",
+ dev_name(&dwc->xhci->dev));
+ phy_remove_lookup(dwc->usb3_generic_phy, "usb3-phy",
+ dev_name(&dwc->xhci->dev));
platform_device_unregister(dwc->xhci);
}
--
2.0.0.rc4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/