Re: blk-mq: bitmap tag: performance degradation?

[Jens Axboe]

On 2014-06-05 20:35, Ming Lei wrote:
> On Fri, Jun 6, 2014 at 9:55 AM, Jens Axboe <axboe@xxxxxxxxx> wrote:
> > On 2014-06-05 17:33, Ming Lei wrote:
> > > On Fri, Jun 6, 2014 at 1:17 AM, Jens Axboe <axboe@xxxxxxxxx> wrote:
> > > > On 06/05/2014 08:16 AM, Ming Lei wrote:
> > > > > On Thu, Jun 5, 2014 at 10:03 PM, Jens Axboe <axboe@xxxxxxxxx> wrote:
> > > > > > On 2014-06-05 08:01, Alexander Gordeev wrote:
> > > > > > > On Wed, Jun 04, 2014 at 08:18:42AM -0600, Jens Axboe wrote:
> > > > > > > > A null_blk test is the absolute best case for percpu_ida, since
> > > > > > > > there are enough tags and everything is localized. The above test is
> > > > > > > > more useful for testing blk-mq than any real world application of
> > > > > > > > the tagging.
> > > > > > > >
> > > > > > > > I've done considerable testing on both 2 and 4 socket (32 and 64
> > > > > > > > CPUs) and bitmap tagging is better in a much wider range of
> > > > > > > > applications. This includes even high tag depth devices like nvme,
> > > > > > > > and more normal ranges like mtip32xx and scsi-mq setups.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Just for the record: bitmap tags on a 48 CPU box with NVMe device
> > > > > > > indeed shows almost the same performance/cache rate as the stock
> > > > > > > kernel.
> > > > > >
> > > > > >
> > > > > >
> > > > > > Thanks for confirming. It's one of the dangers of null_blk, it's not
> > > > > > always
> > > > > > a very accurate simulation of what a real device will do. I think it's
> > > > > > mostly a completion side thing, would be great with a small device that
> > > > > > supported msi-x and could be used as an irq trigger :-)
> > > > >
> > > > >
> > > > > Maybe null_blk at IRQ_TIMER mode is more close to
> > > > > a real device, and I guess the result may be different with
> > > > > mode IRQ_NONE/IRQ_SOFTIRQ.
> > > >
> > > >
> > > > It'd be closer in behavior, but the results might then be skewed by
> > > > hitting the timer way too hard. And it'd be a general slowdown, again
> > > > possibly skewing it. But I haven't tried with the timer completion, to
> > > > see if that yields more accurate modelling for this test, so it might
> > > > actually be a lot better.
> > >
> > >
> > > My test on a 16core VM(host: 2 sockets, 16core):
> > >
> > > 1, bitmap tag allocation(3.15-rc7-next):
> > > - softirq mode: 759K IOPS
> > > - timer mode: 409K IOPS
> > >
> > > 2, percpu_ida allocation(3.15-rc7)
> > > - softirq mode: 1116K IOPS
> > > - timer mode: 411K IOPS
> >
> >
> > It's hard to say if this is close, or whether we are just timer bound at
> > that point.
>
> You are right, my previous test should be timer bound, but it
> should be eased by increasing timer period.
>
> I do the test again with increasing parameter of completion_nsec
> to 235000 from default 10000:
>
> 1, nullblk(timer mode)3.15-rc7:
> - each fio cpu utilization: 80% ~ 90%
> - 860K IOPS
>
> 2, nullbk(timer mode)3.15-rc7-next
> - each fio cpu utilization: 70~80%
> - 940K IOPS
>
> Then bitmap based allocation can be observed to be a bit
> better than percpu ida.

That's more inline with the real device testing I did. If tags are 
plenty, it's a wash between the two. But once you exceed 50% 
utilization, percpu_ida starts to degrade, and in some cases very badly. 
This is especially apparent on bigger 2 socket, or 4 socket boxes.

--
Jens Axboe

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/