Re: [PATCH v2] leds: USB: Add support for MSI GT683R led panels

[Johan Hovold]

[ +CC: Jiri, linux-input, linux-usb (again) ]

First of all, please reply to the original thread and make sure to not
drop people or lists from CC.

On Fri, Jun 06, 2014 at 12:29:06AM +0300, Janne Kanniainen wrote:
> This driver adds support for USB controlled led panels that exist in
> MSI GT683R laptop.

I had a change to look at bit closer at this today and it turns out this
is a HID device and as such is already claimed by the HID driver.

There was a quirk added for this particular VID/PID by commit
620ae90ed8ca ("HID: usbhid: quirk for MSI GX680R led panel") in order to
avoid a 10s delay at boot due to missing report descriptors:

	https://bugzilla.redhat.com/show_bug.cgi?id=907221
	http://www.spinics.net/lists/linux-usb/msg54756.html

Since this is a HID device (and the control requests you're doing are
Set_Report requests) you should probably implement this as a specific
HID driver if there's no generic support you can use directly.

I've added Jiri Kosina (and linux-input) who knows a lot more about the
HID layer and how this is supposed to be implemented as CC.

> Changes in v2:
> 	- sorted headers to alphabetic order
> 	- using devm_kzalloc
> 	- using BIT(n)
> 	- using usb_control_msg instead of usb_submit_urb
> 	- removing unneeded code

There are still some issues in the code below, but I'll only point out
the more problematic ones for now.

> Signed-off-by: Janne Kanniainen <janne.kanniainen@xxxxxxxxx>
> ---
>  drivers/leds/Kconfig       |   6 ++
>  drivers/leds/Makefile      |   1 +
>  drivers/leds/leds-gt683r.c | 158 +++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 165 insertions(+)
>  create mode 100644 drivers/leds/leds-gt683r.c
> 
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 6de9dfb..2cffa0c 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -487,6 +487,12 @@ config LEDS_BLINKM
>  	  This option enables support for the BlinkM RGB LED connected
>  	  through I2C. Say Y to enable support for the BlinkM LED.
>  
> +config LEDS_GT683R
> +       tristate "LED support for the MSI GT683R"
> +       depends on LEDS_CLASS && USB
> +       help
> +         This option enables support for the MSI GT683R LEDS
> +
>  comment "LED Triggers"
>  source "drivers/leds/trigger/Kconfig"
>  
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 3cd76db..af5fb4e 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -54,6 +54,7 @@ obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
>  obj-$(CONFIG_LEDS_MAX8997)		+= leds-max8997.o
>  obj-$(CONFIG_LEDS_LM355x)		+= leds-lm355x.o
>  obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
> +obj-$(CONFIG_LEDS_GT683R)		+= leds-gt683r.o
>  
>  # LED SPI Drivers
>  obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
> diff --git a/drivers/leds/leds-gt683r.c b/drivers/leds/leds-gt683r.c
> new file mode 100644
> index 0000000..5a204ea
> --- /dev/null
> +++ b/drivers/leds/leds-gt683r.c
> @@ -0,0 +1,158 @@
> +/*
> + * MSI GT683R led driver
> + *
> + * Copyright (c) 2014 Janne Kanniainen <janne.kanniainen@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/usb.h>
> +
> +#define USB_DEVICE_ID_MSI_GT683R_LED_PANEL	0xff00
> +#define USB_VENDOR_ID_MSI			0x1770
> +
> +#define GT683R_LED_BACK				BIT(0)
> +#define GT683R_LED_SIDE				BIT(1)
> +#define GT683R_LED_FRONT			BIT(2)
> +#define GT683R_LED_ALL (GT683R_LED_BACK | GT683R_LED_SIDE | GT683R_LED_FRONT)
> +
> +#define GT683R_LED_OFF				0
> +#define GT683R_LED_AUDIO			2
> +#define GT683R_LED_BREATHING			3
> +#define GT683R_LED_NORMAL			5
> +
> +struct gt683r_led {
> +	struct usb_device *usb_dev;
> +	struct usb_endpoint_descriptor *ep;
> +	struct led_classdev led_dev;
> +	struct mutex lock;
> +	struct work_struct work;
> +	enum led_brightness brightness;
> +};
> +
> +static const struct usb_device_id gt683r_led_id[] = {
> +	{ USB_DEVICE(USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL) },
> +	{ }
> +};
> +
> +static const u64 gt683r_led_select_leds = 0x300201ULL;
> +static const u64 gt683r_led_select_type = 0x100200201ULL;

No, you'd still want to use byte arrays for this in order to handle
endianess (if you are to keep these at all).

For arrays you can use the ARRAY_SIZE() macro if that was the reason for
this change. I should have mentioned that when I pointed out that you
cannot use strlen().

Where did you get these (HID report) values from by the way?

> +
> +static void gt683r_brightness_set(struct led_classdev *led_cdev,
> +				  enum led_brightness brightness)
> +{
> +	struct gt683r_led *led =
> +			container_of(led_cdev, struct gt683r_led, led_dev);
> +
> +	mutex_lock(&led->lock);

You cannot grab a mutex here since this function can be called from
interrupt context (if I remember correctly). Either way, you shouldn't
be holding the lock until the work task has finished...

> +
> +	led->brightness = brightness;
> +
> +	schedule_work(&led->work);
> +}
> +
> +static int gt683r_led_snd_msg(struct gt683r_led *led, u64 msg)
> +{
> +	int result = usb_control_msg(led->usb_dev,
> +				usb_sndctrlpipe(led->usb_dev,
> +						led->ep->bEndpointAddress),

No need to store the endpoint in the led struct as the address of
endpoint 0 is 0.

> +				0x09, 0x22, 0x0301, 0x0000,
> +				&msg, sizeof(u64), USB_CTRL_SET_TIMEOUT);

You cannot use a stack allocated buffer (msg) for the data transfer as
some platforms can't do DMA from the stack.

> +	if (result)
> +		dev_err(&led->usb_dev->dev,
> +			"Failed to send control message: %i\n", result);
> +
> +	return result;
> +}
> +
> +static void gt683r_led_set(struct gt683r_led *led, char type)
> +{
> +	gt683r_led_snd_msg(led, gt683r_led_select_leds |
> +			(GT683R_LED_ALL << 24));
> +	gt683r_led_snd_msg(led, gt683r_led_select_type |
> +			(type << 24));
> +}
> +
> +static void gt683r_led_work(struct work_struct *work)
> +{
> +	struct gt683r_led *led =
> +			container_of(work, struct gt683r_led, work);
> +
> +	if (led->brightness)
> +		gt683r_led_set(led, GT683R_LED_NORMAL);
> +	else
> +		gt683r_led_set(led, GT683R_LED_OFF);
> +
> +	mutex_unlock(&led->lock);
> +}
> +
> +static struct led_classdev gt683r_led_dev = {
> +	.name = "gt683r-led",
> +	.brightness_set = gt683r_brightness_set,
> +	.max_brightness = 1,
> +	.flags = LED_CORE_SUSPENDRESUME,
> +};
> +
> +static int gt683r_led_probe(struct usb_interface *intf,
> +			    const struct usb_device_id *id)
> +{
> +	int ret = 0;
> +	struct gt683r_led *led =
> +		devm_kzalloc(&intf->dev, sizeof(struct gt683r_led), GFP_KERNEL);

Again, please split definition and allocation.

> +	if (!led)
> +		return -ENOMEM;
> +
> +	led->usb_dev = interface_to_usbdev(intf);
> +	usb_set_intfdata(intf, led);
> +
> +	led->ep = &led->usb_dev->ep0.desc;
> +	if (!usb_endpoint_xfer_control(led->ep) ||
> +		usb_endpoint_maxp(led->ep) != sizeof(u64))
> +		return -EINVAL;

EP0 is a control endpoint, and you probably don't need the
max-packet-size test either.

> +
> +	led->led_dev = gt683r_led_dev;
> +	ret = led_classdev_register(&led->usb_dev->dev, &led->led_dev);
> +	if (ret) {
> +		dev_err(&led->usb_dev->dev, "Could not register led_classdev\n");
> +		return ret;
> +	}
> +
> +	mutex_init(&led->lock);
> +	INIT_WORK(&led->work, gt683r_led_work);
> +
> +	return 0;
> +}
> +
> +static void gt683r_led_disconnect(struct usb_interface *intf)
> +{
> +	struct gt683r_led *led = usb_get_intfdata(intf);
> +
> +	led_classdev_unregister(&led->led_dev);
> +	cancel_work_sync(&led->work);
> +}
> +
> +static struct usb_driver gt683r_led_driver = {
> +	.probe = gt683r_led_probe,
> +	.disconnect = gt683r_led_disconnect,
> +	.name = "GT683R Led Driver",
> +	.id_table = gt683r_led_id,
> +};
> +
> +module_usb_driver(gt683r_led_driver);
> +
> +MODULE_AUTHOR("Janne Kanniainen");
> +MODULE_DESCRIPTION("MSI GT683R led driver");
> +MODULE_LICENSE("GPL");

Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/