[PATCH] scsi: bfa: bfad_attr.c: Optimization of the code
From: Rickard Strandqvist
Date: Fri Jun 06 2014 - 18:03:44 EST
Minimized the use of snprintf()
And removed a variable that was only used for the temporary storage.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
---
drivers/scsi/bfa/bfad_attr.c | 114 ++++++++++++++++++++++++------------------
1 file changed, 66 insertions(+), 48 deletions(-)
diff --git a/drivers/scsi/bfa/bfad_attr.c b/drivers/scsi/bfa/bfad_attr.c
index 40be670..3fe75ff 100644
--- a/drivers/scsi/bfa/bfad_attr.c
+++ b/drivers/scsi/bfa/bfad_attr.c
@@ -751,69 +751,89 @@ bfad_im_model_desc_show(struct device *dev, struct device_attribute *attr,
bfa_get_adapter_model(&bfad->bfa, model);
nports = bfa_get_nports(&bfad->bfa);
if (!strcmp(model, "Brocade-425"))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 4Gbps PCIe dual port FC HBA");
+ strlcpy(model_descr,
+ "Brocade 4Gbps PCIe dual port FC HBA\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
else if (!strcmp(model, "Brocade-825"))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 8Gbps PCIe dual port FC HBA");
+ strlcpy(model_descr,
+ "Brocade 8Gbps PCIe dual port FC HBA\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
else if (!strcmp(model, "Brocade-42B"))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 4Gbps PCIe dual port FC HBA for HP");
+ strlcpy(model_descr,
+ "Brocade 4Gbps PCIe dual port FC HBA for HP\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
else if (!strcmp(model, "Brocade-82B"))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 8Gbps PCIe dual port FC HBA for HP");
+ strlcpy(model_descr,
+ "Brocade 8Gbps PCIe dual port FC HBA for HP\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
else if (!strcmp(model, "Brocade-1010"))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 10Gbps single port CNA");
+ strlcpy(model_descr,
+ "Brocade 10Gbps single port CNA\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
else if (!strcmp(model, "Brocade-1020"))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 10Gbps dual port CNA");
+ strlcpy(model_descr,
+ "Brocade 10Gbps dual port CNA\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
else if (!strcmp(model, "Brocade-1007"))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 10Gbps CNA for IBM Blade Center");
+ strlcpy(model_descr,
+ "Brocade 10Gbps CNA for IBM Blade Center\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
else if (!strcmp(model, "Brocade-415"))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 4Gbps PCIe single port FC HBA");
+ strlcpy(model_descr,
+ "Brocade 4Gbps PCIe single port FC HBA\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
else if (!strcmp(model, "Brocade-815"))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 8Gbps PCIe single port FC HBA");
+ strlcpy(model_descr,
+ "Brocade 8Gbps PCIe single port FC HBA\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
else if (!strcmp(model, "Brocade-41B"))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 4Gbps PCIe single port FC HBA for HP");
+ strlcpy(model_descr,
+ "Brocade 4Gbps PCIe single port FC HBA for HP\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
else if (!strcmp(model, "Brocade-81B"))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 8Gbps PCIe single port FC HBA for HP");
+ strlcpy(model_descr,
+ "Brocade 8Gbps PCIe single port FC HBA for HP\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
else if (!strcmp(model, "Brocade-804"))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 8Gbps FC HBA for HP Bladesystem C-class");
+ strlcpy(model_descr,
+ "Brocade 8Gbps FC HBA for HP Bladesystem C-class\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
else if (!strcmp(model, "Brocade-1741"))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 10Gbps CNA for Dell M-Series Blade Servers");
+ strlcpy(model_descr,
+ "Brocade 10Gbps CNA for Dell M-Series Blade Servers\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
else if (strstr(model, "Brocade-1860")) {
if (nports == 1 && bfa_ioc_is_cna(&bfad->bfa.ioc))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 10Gbps single port CNA");
+ strlcpy(model_descr,
+ "Brocade 10Gbps single port CNA\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
else if (nports == 1 && !bfa_ioc_is_cna(&bfad->bfa.ioc))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 16Gbps PCIe single port FC HBA");
+ strlcpy(model_descr,
+ "Brocade 16Gbps PCIe single port FC HBA\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
else if (nports == 2 && bfa_ioc_is_cna(&bfad->bfa.ioc))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 10Gbps dual port CNA");
+ strlcpy(model_descr,
+ "Brocade 10Gbps dual port CNA\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
else if (nports == 2 && !bfa_ioc_is_cna(&bfad->bfa.ioc))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 16Gbps PCIe dual port FC HBA");
+ strlcpy(model_descr,
+ "Brocade 16Gbps PCIe dual port FC HBA\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
} else if (!strcmp(model, "Brocade-1867")) {
if (nports == 1 && !bfa_ioc_is_cna(&bfad->bfa.ioc))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 16Gbps PCIe single port FC HBA for IBM");
+ strlcpy(model_descr,
+ "Brocade 16Gbps PCIe single port FC HBA for IBM\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
else if (nports == 2 && !bfa_ioc_is_cna(&bfad->bfa.ioc))
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 16Gbps PCIe dual port FC HBA for IBM");
+ strlcpy(model_descr,
+ "Brocade 16Gbps PCIe dual port FC HBA for IBM\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
} else
- snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Invalid Model");
+ strlcpy(model_descr,
+ "Invalid Model\n",
+ BFA_ADAPTER_MODEL_DESCR_LEN);
- return snprintf(buf, PAGE_SIZE, "%s\n", model_descr);
+ return strlcpy(buf, model_descr, PAGE_SIZE);
}
static ssize_t
@@ -839,12 +859,10 @@ bfad_im_symbolic_name_show(struct device *dev, struct device_attribute *attr,
(struct bfad_im_port_s *) shost->hostdata[0];
struct bfad_s *bfad = im_port->bfad;
struct bfa_lport_attr_s port_attr;
- char symname[BFA_SYMNAME_MAXLEN];
bfa_fcs_lport_get_attr(&bfad->bfa_fcs.fabric.bport, &port_attr);
- strncpy(symname, port_attr.port_cfg.sym_name.symname,
- BFA_SYMNAME_MAXLEN);
- return snprintf(buf, PAGE_SIZE, "%s\n", symname);
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ port_attr.port_cfg.sym_name.symname);
}
static ssize_t
@@ -865,7 +883,7 @@ static ssize_t
bfad_im_drv_version_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
- return snprintf(buf, PAGE_SIZE, "%s\n", BFAD_DRIVER_VERSION);
+ return strlcpy(buf, BFAD_DRIVER_VERSION "\n", PAGE_SIZE);
}
static ssize_t
@@ -913,7 +931,7 @@ static ssize_t
bfad_im_drv_name_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
- return snprintf(buf, PAGE_SIZE, "%s\n", BFAD_DRIVER_NAME);
+ return strlcpy(buf, BFAD_DRIVER_NAME "\n", PAGE_SIZE);
}
static ssize_t
@@ -932,7 +950,7 @@ bfad_im_num_of_discovered_ports_show(struct device *dev,
rports = kzalloc(sizeof(struct bfa_rport_qualifier_s) * nrports,
GFP_ATOMIC);
if (rports == NULL)
- return snprintf(buf, PAGE_SIZE, "Failed\n");
+ return strlcpy(buf, "Failed\n", PAGE_SIZE);
spin_lock_irqsave(&bfad->bfad_lock, flags);
bfa_fcs_lport_get_rport_quals(port->fcs_port, rports, &nrports);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/