Re: [PATCH 2/5] regulator: Add driver for Maxim 77802 PMIC regulators

From: Mark Brown
Date: Mon Jun 09 2014 - 15:39:56 EST


On Mon, Jun 09, 2014 at 11:37:47AM +0200, Javier Martinez Canillas wrote:

> + case REGULATOR_MODE_STANDBY: /* switch off */
> + if (id != MAX77802_LDO1 && id != MAX77802_LDO20 &&
> + id != MAX77802_LDO21 && id != MAX77802_LDO3) {
> + val = MAX77802_OPMODE_STANDBY;
> + break;
> + }
> + /* no break */

This sounds very broken...

> + /* OK if some GPIOs aren't defined */
> + if (!gpio_is_valid(gpio))
> + continue;
> +
> + /* If a GPIO is valid, we'd better be able to claim it */
> + ret = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH,
> + "max77802 selb");
> + if (ret) {
> + dev_err(dev, "can't claim gpio[%d]: %d\n", i, ret);
> + return ret;
> + }

Can this use the GPIO descriptor API?

> +static void max77802_copy_reg(struct device *dev, struct regmap *regmap,
> + int from_reg, int to_reg)
> +{
> + int val;
> + int ret;
> +
> + if (from_reg == to_reg)
> + return;
> +
> + ret = regmap_read(regmap, from_reg, &val);
> + if (!ret)
> + ret = regmap_write(regmap, to_reg, val);
> +
> + if (ret)
> + dev_warn(dev, "Copy err %d => %d (%d)\n",
> + from_reg, to_reg, ret);
> +}

This doesn't look at all device specific, better implement it in generic
code.

> + if (pdata->num_regulators != MAX77802_MAX_REGULATORS) {
> + dev_err(&pdev->dev,
> + "Invalid initial data for regulator's initialiation: " \
> + "expected %d, pdata/dt provided %d\n",
> + MAX77802_MAX_REGULATORS,
> + pdata->num_regulators);
> + return -EINVAL;
> + }

Don't split log messages over multiple lines so people can find the log
message in the kernel source with grep, though in any case checking for
this is a bug - the driver should always be at least able to read the
current state from the hardware.

> +static int __init max77802_pmic_init(void)
> +{
> + return platform_driver_register(&max77802_pmic_driver);
> +}
> +subsys_initcall(max77802_pmic_init);

module_platform_driver().

Attachment: signature.asc
Description: Digital signature