Re: [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon

[Rob Herring]

On Tue, Jun 10, 2014 at 3:52 PM, Tony Luck <tony.luck@xxxxxxxxx> wrote:
> On Mon, Jun 9, 2014 at 4:18 PM, Rob Herring <robherring2@xxxxxxxxx> wrote:
>> It should do auto detect of the baud-rate if it is not specified which
>> for 8250 is just reading the baud-rate divider and calculating the
>> baud-rate using the uart clock. It should just reprogram the divider
>> with the same divider value. I don't see anything obvious why this
>> would have broken.
>
> Something very weird is happening.  Output is good so long as I put the
> trailing ",115200" on the command line.
>
> But I made early_serial8250_setup() printk() the return value it got
> from probe_baud() - in case is was somehow getting 115201 or some
> other silly value ... nope. Exactly 115200.
>
> I also can't explain why the "noise" comes and goes a dozen
> times during boot,
>
> Does some other place in the kernel look at the "uart..." command
> line argument?

Would you be using drivers/firmware/pcdp.c as that is ia64 only? That
shouldn't have an impact that I can see.

Can you print the options string in serial8250_console_setup? Maybe it
is getting lost when the real console is setup.

Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/