[PATCH 11/36] mtd: nand: omap: Update DT binding documentation

[Roger Quadros]

Add compatible id, interrupts and update reg property description.
As the NAND controller needs access to GPMC register space, we need
to pass a second memory resource to the NAND controller node.

Due to the wierd way the reg property has been implemented (i.e.
CS number required in 1st number of reg property) we will need to
use a number outside the possible CS numbers for the GPMC register space.

As a SoC can have fewer than 10 chip selects, 255 seems like a safe
bet for the GPMC register space.

Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
 Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index 5e1f31b..8831116 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -13,7 +13,13 @@ Documentation/devicetree/bindings/mtd/nand.txt
 
 Required properties:
 
+ - compatible:	"ti,omap2-nand"
  - reg:		The CS line the peripheral is connected to
+		Should contain 2 resource specifiers
+		- range id (CS number), base offset and length of the
+		  NAND I/O space
+		- range id,  base offset and length of the GPMC register space.
+ - interrupts:	Interrupt resource specifier for GPMC interrupt.
 
 Optional properties:
 
@@ -53,17 +59,21 @@ Example for an AM33xx board:
 	gpmc: gpmc@50000000 {
 		compatible = "ti,am3352-gpmc";
 		ti,hwmods = "gpmc";
-		reg = <0x50000000 0x1000000>;
+		reg = <0x50000000 0x36c>;
 		interrupts = <100>;
 		gpmc,num-cs = <8>;
 		gpmc,num-waitpins = <2>;
 		#address-cells = <2>;
 		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x2000>;	/* CS0: NAND */
+		ranges = <0 0 0x08000000 0x1000000	/* CS0 space, 16MB */
+			  255 0 0x50000000 0x36c>;	/* GPMC reg space */
 		elm_id = <&elm>;
 
 		nand@0,0 {
-			reg = <0 0 0>; /* CS0, offset 0 */
+			compatible = "ti,omap2-nand";
+			reg = <0 0 4		/* CS0, offset 0, NAND I/O window 4 */
+			       255 0 0x36c>;	/* GPMC reg space */
+			interrupts = <100>;
 			nand-bus-width = <16>;
 			ti,nand-ecc-opt = "bch8";
 			ti,nand-xfer-type = "polled";
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/