[PATCH 00/36] OMAP: GPMC: Restructure and move OMAP GPMC driver out of mach-omap2

From: Roger Quadros
Date: Wed Jun 11 2014 - 05:17:31 EST

Next message: Boris BREZILLON: "[PATCH v7 0/2] i2c: sunxi: add P2WI controller support"
Previous message: Andy Whitcroft: "Re: [PATCH] [checkpatch.pl] ctx_statement_block #if/#else/#endif fix"
Next in thread: Roger Quadros: "[PATCH 03/36] ARM: OMAP2+: gpmc: Add platform data"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

This is a complete functional set to get the gpmc driver out of mach-omap2
and into drivers/memory. The DT binding remains the same except for the
following minor changes
- compatible property is required for NAND & OneNAND nodes
- Second register space and interrupts properties are required for
NAND controller node
- ti,onenand-sync-rw property added for OneNAND node.

The series does the following changes
- Move GPMC IRQ and NAND register handling to NAND driver.
The entire GPMC register space is made available to the NAND driver.
- Clean up NAND device tree handling. Don't rely on legacy platform device
i.e. don't call gpmc_nand_init()
- Add 2 public APIs omap_gpmc_retime() and omap_gpmc_get_clk_period()
omap_gpmc_retime() allows to reconfigure the GPMC settings and timings
for the specified Chip select region.
omap_gpmc_get_clk_period() allows to query the GPMC_CLK (external clock)
period, to perform timing calculations.
Both functions will be needed by the OneNAND driver since it calculates
device timings on the fly and needs to change from Asynchronous mode
to Synchronous mode.
- Setup OneNAND in Asynchronous mode by default and move Synchronous
setting code into OneNAND driver.
- Clean up OneNAND device tree handling. Don't rely on legacy platform device
i.e. don't call gpmc_onenand_init()
- Introduce gpmc_generic_init() that should be used by board files to specify
GPMC chip select setting/timing and platform device within that Chip Select.
- Stop using all gpmc*() that are meant to be private to GPMC driver.
- Move GPMC driver into drivers/memory

Tested on:

- beagleboard C4: NAND
- Nokia N900: OneNAND

Changelog:

[1] RFC patch - https://lkml.org/lkml/2014/5/21/218

cheers,
-roger

---
Roger Quadros (36):
ARM: OMAP3: hwmod: Fix gpmc memory resource space
ARM: dts: OMAP2+: Fix GPMC register space size
ARM: OMAP2+: gpmc: Add platform data
ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data
mtd: nand: omap: Move IRQ handling from GPMC to NAND driver
mtd: nand: omap: Move gpmc_update_nand_reg to nand driver
mtd: nand: omap: Move NAND write protect code from GPMC to NAND driver
mtd: nand: omap: Copy platform data parameters to omap_nand_info data
mtd: nand: omap: Clean up device tree support
ARM: dts: OMAP2+: Fix NAND device nodes
mtd: nand: omap: Update DT binding documentation
ARM: dts: omap3-beagle: Add NAND device
ARM: OMAP2+: gpmc.c: sanity check bank-width DT property
ARM: OMAP2+: gpmc: Allow drivers to reconfigure GPMC settings &
timings
ARM: OMAP2+: gpmc: Allow drivers to query GPMC_CLK period
mtd: onenand: omap: Remove regulator management code
ARM: OMAP2+: gpmc-onenand: Use Async settings/timings by default
ARM: OMAP2+: gpmc-onenand: Move Synchronous setting code to drivers/
mtd: onenand: omap: Use devres managed resources
mtd: onenand: omap: Clean up device tree support
ARM: dts: OMAP2+: Fix OneNAND device nodes
ARM: OMAP2+: gmpc: add gpmc_generic_init()
ARM: OMAP2+: gpmc: use platform data to configure CS space and
poplulate device
ARM: OMAP2+: gpmc: add NAND specific setup
ARM: OMAP2+: gpmc: Support multiple Chip Selects per device
ARM: OMAP2+: gpmc-smc91x: Get rid of retime() from
omap_smc91x_platform_data
ARM: OMAP2+: usb-tusb6010: Use omap_gpmc_retime()
ARM: OMAP2+: nand: Update gpmc_nand_init() to use generic_gpmc_init()
ARM: OMAP2+: gpmc-smc91x: Use gpmc_generic_init()
ARM: OMAP2+: gpmc-smsc911x: Use gpmc_generic_init()
ARM: OMAP2: usb-tusb6010: Use gpmc_generic_init()
ARM: OMAP2+: onenand: Use gpmc_generic_init()
ARM: OMAP2+: board-flash: Use gpmc_generic_init() for NOR
ARM: OMAP2+: gpmc: Make externally unused functions/defines private
ARM: OMAP2+: gpmc: move GPMC driver into drivers/memory
ARM: OMAP2+: defconfig: Enable TI GPMC driver

.../devicetree/bindings/mtd/gpmc-nand.txt | 16 +-
.../devicetree/bindings/mtd/gpmc-onenand.txt | 4 +
arch/arm/boot/dts/am335x-evm.dts | 8 +-
arch/arm/boot/dts/am335x-igep0033.dtsi | 8 +-
arch/arm/boot/dts/am33xx.dtsi | 2 +-
arch/arm/boot/dts/am4372.dtsi | 2 +-
arch/arm/boot/dts/am43x-epos-evm.dts | 8 +-
arch/arm/boot/dts/omap2420-n8x0-common.dtsi | 5 +-
arch/arm/boot/dts/omap2420.dtsi | 2 +-
arch/arm/boot/dts/omap2430.dtsi | 2 +-
arch/arm/boot/dts/omap3-beagle.dts | 53 +
arch/arm/boot/dts/omap3-devkit8000.dts | 9 +-
arch/arm/boot/dts/omap3-evm-37xx.dts | 10 +-
arch/arm/boot/dts/omap3-igep0020.dts | 10 +-
arch/arm/boot/dts/omap3-igep0030.dts | 8 +-
arch/arm/boot/dts/omap3-ldp.dts | 10 +-
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 10 +-
arch/arm/boot/dts/omap3-lilly-dbb056.dts | 7 +-
arch/arm/boot/dts/omap3-n900.dts | 6 +-
arch/arm/boot/dts/omap3-n950-n9.dtsi | 6 +-
arch/arm/boot/dts/omap3.dtsi | 2 +-
arch/arm/boot/dts/omap3430-sdp.dts | 14 +-
arch/arm/boot/dts/omap4.dtsi | 2 +-
arch/arm/boot/dts/omap5.dtsi | 2 +-
arch/arm/configs/omap2plus_defconfig | 2 +
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/board-3430sdp.c | 8 +-
arch/arm/mach-omap2/board-flash.c | 28 +-
arch/arm/mach-omap2/gpmc-nand.c | 66 +-
arch/arm/mach-omap2/gpmc-onenand.c | 351 +---
arch/arm/mach-omap2/gpmc-smc91x.c | 91 +-
arch/arm/mach-omap2/gpmc-smc91x.h | 1 -
arch/arm/mach-omap2/gpmc-smsc911x.c | 76 +-
arch/arm/mach-omap2/gpmc.c | 1872 --------------------
arch/arm/mach-omap2/gpmc.h | 221 +--
arch/arm/mach-omap2/gpmc_legacy.c | 296 ++++
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 +-
arch/arm/mach-omap2/usb-tusb6010.c | 172 +-
drivers/memory/Kconfig | 10 +
drivers/memory/Makefile | 1 +
drivers/memory/ti-gpmc.c | 1829 +++++++++++++++++++
drivers/mtd/nand/Kconfig | 2 +-
drivers/mtd/nand/omap2.c | 364 +++-
drivers/mtd/onenand/Kconfig | 6 +-
drivers/mtd/onenand/omap2.c | 456 +++--
include/linux/platform_data/gpmc-omap.h | 189 ++
include/linux/platform_data/mtd-nand-omap2.h | 10 +-
include/linux/platform_data/mtd-onenand-omap2.h | 7 +-
48 files changed, 3361 insertions(+), 2907 deletions(-)
delete mode 100644 arch/arm/mach-omap2/gpmc.c
create mode 100644 arch/arm/mach-omap2/gpmc_legacy.c
create mode 100644 drivers/memory/ti-gpmc.c
create mode 100644 include/linux/platform_data/gpmc-omap.h

--
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Boris BREZILLON: "[PATCH v7 0/2] i2c: sunxi: add P2WI controller support"
Previous message: Andy Whitcroft: "Re: [PATCH] [checkpatch.pl] ctx_statement_block #if/#else/#endif fix"
Next in thread: Roger Quadros: "[PATCH 03/36] ARM: OMAP2+: gpmc: Add platform data"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]