[PATCH 17/22] staging: rtl8188eu: Remove function _rtw_read8()
From: navin patidar
Date: Wed Jun 11 2014 - 13:26:11 EST
_rtw_read8() is a wrapper function, being used to call usb_read8().
Call usb_read8() directly and drop _rtw_read8().
Signed-off-by: navin patidar <navin.patidar@xxxxxxxxx>
---
drivers/staging/rtl8188eu/core/rtw_debug.c | 2 +-
drivers/staging/rtl8188eu/core/rtw_efuse.c | 24 +++---
drivers/staging/rtl8188eu/core/rtw_io.c | 13 ---
drivers/staging/rtl8188eu/core/rtw_mp.c | 6 +-
drivers/staging/rtl8188eu/core/rtw_mp_ioctl.c | 2 +-
drivers/staging/rtl8188eu/hal/HalPhyRf_8188e.c | 6 +-
drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c | 4 +-
drivers/staging/rtl8188eu/hal/hal_com.c | 8 +-
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c | 10 +--
drivers/staging/rtl8188eu/hal/rtl8188e_dm.c | 2 +-
drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c | 42 +++++-----
drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c | 4 +-
drivers/staging/rtl8188eu/hal/rtl8188eu_led.c | 6 +-
drivers/staging/rtl8188eu/hal/usb_halinit.c | 90 ++++++++++-----------
drivers/staging/rtl8188eu/hal/usb_ops_linux.c | 3 +-
drivers/staging/rtl8188eu/include/rtw_io.h | 4 +-
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c | 22 ++---
17 files changed, 116 insertions(+), 132 deletions(-)
diff --git a/drivers/staging/rtl8188eu/core/rtw_debug.c b/drivers/staging/rtl8188eu/core/rtw_debug.c
index bf39b64..acd6d45 100644
--- a/drivers/staging/rtl8188eu/core/rtw_debug.c
+++ b/drivers/staging/rtl8188eu/core/rtw_debug.c
@@ -98,7 +98,7 @@ int proc_get_read_reg(char *page, char **start,
switch (proc_get_read_len) {
case 1:
- len += snprintf(page + len, count - len, "rtw_read8(0x%x)=0x%x\n", proc_get_read_addr, rtw_read8(padapter, proc_get_read_addr));
+ len += snprintf(page + len, count - len, "usb_read8(0x%x)=0x%x\n", proc_get_read_addr, usb_read8(padapter, proc_get_read_addr));
break;
case 2:
len += snprintf(page + len, count - len, "usb_read16(0x%x)=0x%x\n", proc_get_read_addr, usb_read16(padapter, proc_get_read_addr));
diff --git a/drivers/staging/rtl8188eu/core/rtw_efuse.c b/drivers/staging/rtl8188eu/core/rtw_efuse.c
index 2a1b179..1da9d1e 100644
--- a/drivers/staging/rtl8188eu/core/rtw_efuse.c
+++ b/drivers/staging/rtl8188eu/core/rtw_efuse.c
@@ -182,11 +182,11 @@ ReadEFuseByte(
/* Write Address */
usb_write8(Adapter, EFUSE_CTRL+1, (_offset & 0xff));
- readbyte = rtw_read8(Adapter, EFUSE_CTRL+2);
+ readbyte = usb_read8(Adapter, EFUSE_CTRL+2);
usb_write8(Adapter, EFUSE_CTRL+2, ((_offset >> 8) & 0x03) | (readbyte & 0xfc));
/* Write bit 32 0 */
- readbyte = rtw_read8(Adapter, EFUSE_CTRL+3);
+ readbyte = usb_read8(Adapter, EFUSE_CTRL+3);
usb_write8(Adapter, EFUSE_CTRL+3, (readbyte & 0x7f));
/* Check bit 32 read-ready */
@@ -264,27 +264,27 @@ u8 EFUSE_Read1Byte(struct adapter *Adapter, u16 Address)
/* Write E-fuse Register address bit0~7 */
temp = Address & 0xFF;
usb_write8(Adapter, EFUSE_CTRL+1, temp);
- Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+2);
+ Bytetemp = usb_read8(Adapter, EFUSE_CTRL+2);
/* Write E-fuse Register address bit8~9 */
temp = ((Address >> 8) & 0x03) | (Bytetemp & 0xFC);
usb_write8(Adapter, EFUSE_CTRL+2, temp);
/* Write 0x30[31]= 0 */
- Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3);
+ Bytetemp = usb_read8(Adapter, EFUSE_CTRL+3);
temp = Bytetemp & 0x7F;
usb_write8(Adapter, EFUSE_CTRL+3, temp);
/* Wait Write-ready (0x30[31]= 1) */
- Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3);
+ Bytetemp = usb_read8(Adapter, EFUSE_CTRL+3);
while (!(Bytetemp & 0x80)) {
- Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3);
+ Bytetemp = usb_read8(Adapter, EFUSE_CTRL+3);
k++;
if (k == 1000) {
k = 0;
break;
}
}
- data = rtw_read8(Adapter, EFUSE_CTRL);
+ data = usb_read8(Adapter, EFUSE_CTRL);
return data;
} else {
return 0xFF;
@@ -306,14 +306,14 @@ u8 efuse_OneByteRead(struct adapter *pAdapter, u16 addr, u8 *data, bool pseudo)
/* address */
usb_write8(pAdapter, EFUSE_CTRL+1, (u8)(addr & 0xff));
usb_write8(pAdapter, EFUSE_CTRL+2, ((u8)((addr>>8) & 0x03)) |
- (rtw_read8(pAdapter, EFUSE_CTRL+2) & 0xFC));
+ (usb_read8(pAdapter, EFUSE_CTRL+2) & 0xFC));
usb_write8(pAdapter, EFUSE_CTRL+3, 0x72);/* read cmd */
- while (!(0x80 & rtw_read8(pAdapter, EFUSE_CTRL+3)) && (tmpidx < 100))
+ while (!(0x80 & usb_read8(pAdapter, EFUSE_CTRL+3)) && (tmpidx < 100))
tmpidx++;
if (tmpidx < 100) {
- *data = rtw_read8(pAdapter, EFUSE_CTRL);
+ *data = usb_read8(pAdapter, EFUSE_CTRL);
result = true;
} else {
*data = 0xff;
@@ -337,13 +337,13 @@ u8 efuse_OneByteWrite(struct adapter *pAdapter, u16 addr, u8 data, bool pseudo)
/* address */
usb_write8(pAdapter, EFUSE_CTRL+1, (u8)(addr&0xff));
usb_write8(pAdapter, EFUSE_CTRL+2,
- (rtw_read8(pAdapter, EFUSE_CTRL+2) & 0xFC) |
+ (usb_read8(pAdapter, EFUSE_CTRL+2) & 0xFC) |
(u8)((addr>>8) & 0x03));
usb_write8(pAdapter, EFUSE_CTRL, data);/* data */
usb_write8(pAdapter, EFUSE_CTRL+3, 0xF2);/* write cmd */
- while ((0x80 & rtw_read8(pAdapter, EFUSE_CTRL+3)) && (tmpidx < 100))
+ while ((0x80 & usb_read8(pAdapter, EFUSE_CTRL+3)) && (tmpidx < 100))
tmpidx++;
if (tmpidx < 100)
diff --git a/drivers/staging/rtl8188eu/core/rtw_io.c b/drivers/staging/rtl8188eu/core/rtw_io.c
index 3ce1134..25b0a87 100644
--- a/drivers/staging/rtl8188eu/core/rtw_io.c
+++ b/drivers/staging/rtl8188eu/core/rtw_io.c
@@ -51,19 +51,6 @@ jackson@xxxxxxxxxxxxxx
#define rtw_cpu_to_le16(val) cpu_to_le16(val)
#define rtw_cpu_to_le32(val) cpu_to_le32(val)
-
-u8 _rtw_read8(struct adapter *adapter, u32 addr)
-{
- u8 r_val;
- struct io_priv *pio_priv = &adapter->iopriv;
- struct intf_hdl *pintfhdl = &(pio_priv->intf);
- u8 (*_read8)(struct adapter *pintfhdl, u32 addr);
-
- _read8 = pintfhdl->io_ops._read8;
- r_val = _read8(adapter, addr);
- return r_val;
-}
-
int rtw_init_io_priv(struct adapter *padapter, void (*set_intf_ops)(struct _io_ops *pops))
{
struct io_priv *piopriv = &padapter->iopriv;
diff --git a/drivers/staging/rtl8188eu/core/rtw_mp.c b/drivers/staging/rtl8188eu/core/rtw_mp.c
index 2f3d0ab..fa8704d 100644
--- a/drivers/staging/rtl8188eu/core/rtw_mp.c
+++ b/drivers/staging/rtl8188eu/core/rtw_mp.c
@@ -30,7 +30,7 @@ u32 read_macreg(struct adapter *padapter, u32 addr, u32 sz)
switch (sz) {
case 1:
- val = rtw_read8(padapter, addr);
+ val = usb_read8(padapter, addr);
break;
case 2:
val = usb_read16(padapter, addr);
@@ -302,7 +302,7 @@ static void disable_dm(struct adapter *padapter)
/* 3 1. disable firmware dynamic mechanism */
/* disable Power Training, Rate Adaptive */
- v8 = rtw_read8(padapter, REG_BCN_CTRL);
+ v8 = usb_read8(padapter, REG_BCN_CTRL);
v8 &= ~EN_BCN_FUNCTION;
usb_write8(padapter, REG_BCN_CTRL, v8);
@@ -421,7 +421,7 @@ end_of_mp_start_test:
if (res == _SUCCESS) {
/* set MSR to WIFI_FW_ADHOC_STATE */
- val8 = rtw_read8(padapter, MSR) & 0xFC; /* 0x0102 */
+ val8 = usb_read8(padapter, MSR) & 0xFC; /* 0x0102 */
val8 |= WIFI_FW_ADHOC_STATE;
usb_write8(padapter, MSR, val8); /* Link in ad hoc network */
}
diff --git a/drivers/staging/rtl8188eu/core/rtw_mp_ioctl.c b/drivers/staging/rtl8188eu/core/rtw_mp_ioctl.c
index 4f6e7e8..c06cd82 100644
--- a/drivers/staging/rtl8188eu/core/rtw_mp_ioctl.c
+++ b/drivers/staging/rtl8188eu/core/rtw_mp_ioctl.c
@@ -801,7 +801,7 @@ int rtl8188eu_oid_rt_pro_read_register_hdl(struct oid_par_priv *poid_par_priv)
switch (width) {
case 1:
- RegRWStruct->value = rtw_read8(Adapter, offset);
+ RegRWStruct->value = usb_read8(Adapter, offset);
break;
case 2:
RegRWStruct->value = usb_read16(Adapter, offset);
diff --git a/drivers/staging/rtl8188eu/hal/HalPhyRf_8188e.c b/drivers/staging/rtl8188eu/hal/HalPhyRf_8188e.c
index c4ee978..3a7d35d 100644
--- a/drivers/staging/rtl8188eu/hal/HalPhyRf_8188e.c
+++ b/drivers/staging/rtl8188eu/hal/HalPhyRf_8188e.c
@@ -819,7 +819,7 @@ static void _PHY_SaveMACRegisters(
struct odm_dm_struct *dm_odm = &pHalData->odmpriv;
ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD, ("Save MAC parameters.\n"));
for (i = 0; i < (IQK_MAC_REG_NUM - 1); i++) {
- MACBackup[i] = rtw_read8(adapt, MACReg[i]);
+ MACBackup[i] = usb_read8(adapt, MACReg[i]);
}
MACBackup[i] = usb_read32(adapt, MACReg[i]);
}
@@ -1205,7 +1205,7 @@ static void phy_LCCalibrate_8188E(struct adapter *adapt, bool is2t)
u32 RF_Amode = 0, RF_Bmode = 0, LC_Cal;
/* Check continuous TX and Packet TX */
- tmpreg = rtw_read8(adapt, 0xd03);
+ tmpreg = usb_read8(adapt, 0xd03);
if ((tmpreg&0x70) != 0) /* Deal with contisuous TX case */
usb_write8(adapt, 0xd03, tmpreg&0x8F); /* disable all continuous TX */
@@ -1446,7 +1446,7 @@ static void phy_setrfpathswitch_8188e(struct adapter *adapt, bool main, bool is2
{
if (!adapt->hw_init_completed) {
u8 u1btmp;
- u1btmp = rtw_read8(adapt, REG_LEDCFG2) | BIT7;
+ u1btmp = usb_read8(adapt, REG_LEDCFG2) | BIT7;
usb_write8(adapt, REG_LEDCFG2, u1btmp);
PHY_SetBBReg(adapt, rFPGA0_XAB_RFParameter, BIT13, 0x01);
}
diff --git a/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c b/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c
index d90c544..1808d35 100644
--- a/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c
+++ b/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c
@@ -80,7 +80,7 @@ u8 HalPwrSeqCmdParsing(struct adapter *padapter, u8 cut_vers, u8 fab_vers,
offset = GET_PWR_CFG_OFFSET(pwrcfgcmd);
/* Read the value from system register */
- value = rtw_read8(padapter, offset);
+ value = usb_read8(padapter, offset);
value &= ~(GET_PWR_CFG_MASK(pwrcfgcmd));
value |= (GET_PWR_CFG_VALUE(pwrcfgcmd) & GET_PWR_CFG_MASK(pwrcfgcmd));
@@ -94,7 +94,7 @@ u8 HalPwrSeqCmdParsing(struct adapter *padapter, u8 cut_vers, u8 fab_vers,
poll_bit = false;
offset = GET_PWR_CFG_OFFSET(pwrcfgcmd);
do {
- value = rtw_read8(padapter, offset);
+ value = usb_read8(padapter, offset);
value &= GET_PWR_CFG_MASK(pwrcfgcmd);
if (value == (GET_PWR_CFG_VALUE(pwrcfgcmd) & GET_PWR_CFG_MASK(pwrcfgcmd)))
diff --git a/drivers/staging/rtl8188eu/hal/hal_com.c b/drivers/staging/rtl8188eu/hal/hal_com.c
index f69dbf9..429de69 100644
--- a/drivers/staging/rtl8188eu/hal/hal_com.c
+++ b/drivers/staging/rtl8188eu/hal/hal_com.c
@@ -341,7 +341,7 @@ s32 c2h_evt_read(struct adapter *adapter, u8 *buf)
if (buf == NULL)
goto exit;
- trigger = rtw_read8(adapter, REG_C2HEVT_CLEAR);
+ trigger = usb_read8(adapter, REG_C2HEVT_CLEAR);
if (trigger == C2H_EVT_HOST_CLOSE)
goto exit; /* Not ready */
@@ -352,15 +352,15 @@ s32 c2h_evt_read(struct adapter *adapter, u8 *buf)
_rtw_memset(c2h_evt, 0, 16);
- *buf = rtw_read8(adapter, REG_C2HEVT_MSG_NORMAL);
- *(buf+1) = rtw_read8(adapter, REG_C2HEVT_MSG_NORMAL + 1);
+ *buf = usb_read8(adapter, REG_C2HEVT_MSG_NORMAL);
+ *(buf+1) = usb_read8(adapter, REG_C2HEVT_MSG_NORMAL + 1);
RT_PRINT_DATA(_module_hal_init_c_, _drv_info_, "c2h_evt_read(): ",
&c2h_evt , sizeof(c2h_evt));
/* Read the content */
for (i = 0; i < c2h_evt->plen; i++)
- c2h_evt->payload[i] = rtw_read8(adapter, REG_C2HEVT_MSG_NORMAL +
+ c2h_evt->payload[i] = usb_read8(adapter, REG_C2HEVT_MSG_NORMAL +
sizeof(*c2h_evt) + i);
RT_PRINT_DATA(_module_hal_init_c_, _drv_info_,
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
index 17ab11b..5c9d64e 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
@@ -41,7 +41,7 @@ static u8 _is_fw_read_cmd_down(struct adapter *adapt, u8 msgbox_num)
u8 valid;
do {
- valid = rtw_read8(adapt, REG_HMETFR) & BIT(msgbox_num);
+ valid = usb_read8(adapt, REG_HMETFR) & BIT(msgbox_num);
if (0 == valid)
read_down = true;
} while ((!read_down) && (retry_cnts--));
@@ -625,8 +625,8 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
/* Disable Hw protection for a time which revserd for Hw sending beacon. */
/* Fix download reserved page packet fail that access collision with the protection time. */
/* 2010.05.11. Added by tynli. */
- usb_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL)&(~BIT(3)));
- usb_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL)|BIT(4));
+ usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL)&(~BIT(3)));
+ usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL)|BIT(4));
if (haldata->RegFwHwTxQCtrl&BIT6) {
DBG_88E("HalDownloadRSVDPage(): There is an Adapter is sending beacon.\n");
@@ -668,8 +668,8 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
/* */
/* Enable Bcn */
- usb_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL)|BIT(3));
- usb_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL)&(~BIT(4)));
+ usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL)|BIT(3));
+ usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL)&(~BIT(4)));
/* To make sure that if there exists an adapter which would like to send beacon. */
/* If exists, the origianl value of 0x422[6] will be 1, we should check this to */
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c b/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c
index 65cf139..917c60e 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c
@@ -36,7 +36,7 @@ static void dm_InitGPIOSetting(struct adapter *Adapter)
{
u8 tmp1byte;
- tmp1byte = rtw_read8(Adapter, REG_GPIO_MUXCFG);
+ tmp1byte = usb_read8(Adapter, REG_GPIO_MUXCFG);
tmp1byte &= (GPIOSEL_GPIO | ~GPIOSEL_ENBT);
usb_write8(Adapter, REG_GPIO_MUXCFG, tmp1byte);
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
index bcce688..58426ac 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
@@ -36,7 +36,7 @@ static void iol_mode_enable(struct adapter *padapter, u8 enable)
if (enable) {
/* Enable initial offload */
- reg_0xf0 = rtw_read8(padapter, REG_SYS_CFG);
+ reg_0xf0 = usb_read8(padapter, REG_SYS_CFG);
usb_write8(padapter, REG_SYS_CFG, reg_0xf0|SW_OFFLOAD_EN);
if (!padapter->bFWReady) {
@@ -46,7 +46,7 @@ static void iol_mode_enable(struct adapter *padapter, u8 enable)
} else {
/* disable initial offload */
- reg_0xf0 = rtw_read8(padapter, REG_SYS_CFG);
+ reg_0xf0 = usb_read8(padapter, REG_SYS_CFG);
usb_write8(padapter, REG_SYS_CFG, reg_0xf0 & ~SW_OFFLOAD_EN);
}
}
@@ -58,16 +58,16 @@ static s32 iol_execute(struct adapter *padapter, u8 control)
u32 start = 0, passing_time = 0;
control = control&0x0f;
- reg_0x88 = rtw_read8(padapter, REG_HMEBOX_E0);
+ reg_0x88 = usb_read8(padapter, REG_HMEBOX_E0);
usb_write8(padapter, REG_HMEBOX_E0, reg_0x88|control);
start = jiffies;
- while ((reg_0x88 = rtw_read8(padapter, REG_HMEBOX_E0)) & control &&
+ while ((reg_0x88 = usb_read8(padapter, REG_HMEBOX_E0)) & control &&
(passing_time = rtw_get_passing_time_ms(start)) < 1000) {
;
}
- reg_0x88 = rtw_read8(padapter, REG_HMEBOX_E0);
+ reg_0x88 = usb_read8(padapter, REG_HMEBOX_E0);
status = (reg_0x88 & control) ? _FAIL : _SUCCESS;
if (reg_0x88 & control<<4)
status = _FAIL;
@@ -227,7 +227,7 @@ static void efuse_read_phymap_from_txpktbuf(
u8 *pos = content;
if (bcnhead < 0) /* if not valid */
- bcnhead = rtw_read8(adapter, REG_TDECTRL+1);
+ bcnhead = usb_read8(adapter, REG_TDECTRL+1);
DBG_88E("%s bcnhead:%d\n", __func__, bcnhead);
@@ -240,9 +240,9 @@ static void efuse_read_phymap_from_txpktbuf(
usb_write8(adapter, REG_TXPKTBUF_DBG, 0);
start = jiffies;
- while (!(reg_0x143 = rtw_read8(adapter, REG_TXPKTBUF_DBG)) &&
+ while (!(reg_0x143 = usb_read8(adapter, REG_TXPKTBUF_DBG)) &&
(passing_time = rtw_get_passing_time_ms(start)) < 1000) {
- DBG_88E("%s polling reg_0x143:0x%02x, reg_0x106:0x%02x\n", __func__, reg_0x143, rtw_read8(adapter, 0x106));
+ DBG_88E("%s polling reg_0x143:0x%02x, reg_0x106:0x%02x\n", __func__, reg_0x143, usb_read8(adapter, 0x106));
msleep(1);
}
@@ -253,8 +253,8 @@ static void efuse_read_phymap_from_txpktbuf(
u8 lenc[2];
u16 lenbak, aaabak;
u16 aaa;
- lenc[0] = rtw_read8(adapter, REG_PKTBUF_DBG_DATA_L);
- lenc[1] = rtw_read8(adapter, REG_PKTBUF_DBG_DATA_L+1);
+ lenc[0] = usb_read8(adapter, REG_PKTBUF_DBG_DATA_L);
+ lenc[1] = usb_read8(adapter, REG_PKTBUF_DBG_DATA_L+1);
aaabak = le16_to_cpup((__le16 *)lenc);
lenbak = le16_to_cpu(*((__le16 *)lenc));
@@ -399,15 +399,15 @@ static void _FWDownloadEnable(struct adapter *padapter, bool enable)
if (enable) {
/* MCU firmware download enable. */
- tmp = rtw_read8(padapter, REG_MCUFWDL);
+ tmp = usb_read8(padapter, REG_MCUFWDL);
usb_write8(padapter, REG_MCUFWDL, tmp | 0x01);
/* 8051 reset */
- tmp = rtw_read8(padapter, REG_MCUFWDL+2);
+ tmp = usb_read8(padapter, REG_MCUFWDL+2);
usb_write8(padapter, REG_MCUFWDL+2, tmp&0xf7);
} else {
/* MCU firmware download disable. */
- tmp = rtw_read8(padapter, REG_MCUFWDL);
+ tmp = usb_read8(padapter, REG_MCUFWDL);
usb_write8(padapter, REG_MCUFWDL, tmp&0xfe);
/* Reserved for fw extension. */
@@ -494,7 +494,7 @@ static int _PageWrite(struct adapter *padapter, u32 page, void *buffer, u32 size
u8 value8;
u8 u8Page = (u8)(page & 0x07);
- value8 = (rtw_read8(padapter, REG_MCUFWDL+2) & 0xF8) | u8Page;
+ value8 = (usb_read8(padapter, REG_MCUFWDL+2) & 0xF8) | u8Page;
usb_write8(padapter, REG_MCUFWDL+2, value8);
return _BlockWrite(padapter, buffer, size);
@@ -536,7 +536,7 @@ void _8051Reset88E(struct adapter *padapter)
{
u8 u1bTmp;
- u1bTmp = rtw_read8(padapter, REG_SYS_FUNC_EN+1);
+ u1bTmp = usb_read8(padapter, REG_SYS_FUNC_EN+1);
usb_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp&(~BIT2));
usb_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp|(BIT2));
DBG_88E("=====> _8051Reset88E(): 8051 reset success .\n");
@@ -666,7 +666,7 @@ s32 rtl8188e_FirmwareDownload(struct adapter *padapter)
/* Suggested by Filen. If 8051 is running in RAM code, driver should inform Fw to reset by itself, */
/* or it will cause download Fw fail. 2010.02.01. by tynli. */
- if (rtw_read8(padapter, REG_MCUFWDL) & RAM_DL_SEL) { /* 8051 RAM code */
+ if (usb_read8(padapter, REG_MCUFWDL) & RAM_DL_SEL) { /* 8051 RAM code */
usb_write8(padapter, REG_MCUFWDL, 0x00);
_8051Reset88E(padapter);
}
@@ -675,7 +675,7 @@ s32 rtl8188e_FirmwareDownload(struct adapter *padapter)
fwdl_start_time = jiffies;
while (1) {
/* reset the FWDL chksum */
- usb_write8(padapter, REG_MCUFWDL, rtw_read8(padapter, REG_MCUFWDL) | FWDL_ChkSum_rpt);
+ usb_write8(padapter, REG_MCUFWDL, usb_read8(padapter, REG_MCUFWDL) | FWDL_ChkSum_rpt);
rtStatus = _WriteFW(padapter, pFirmwareBuf, FirmwareLen);
@@ -784,7 +784,7 @@ hal_EfusePowerSwitch_RTL8188E(
if (bWrite) {
/* Enable LDO 2.5V before read/write action */
- tempval = rtw_read8(pAdapter, EFUSE_TEST+3);
+ tempval = usb_read8(pAdapter, EFUSE_TEST+3);
tempval &= 0x0F;
tempval |= (VOLTAGE_V25 << 4);
usb_write8(pAdapter, EFUSE_TEST+3, (tempval | 0x80));
@@ -794,7 +794,7 @@ hal_EfusePowerSwitch_RTL8188E(
if (bWrite) {
/* Disable LDO 2.5V after read/write action */
- tempval = rtw_read8(pAdapter, EFUSE_TEST+3);
+ tempval = usb_read8(pAdapter, EFUSE_TEST+3);
usb_write8(pAdapter, EFUSE_TEST+3, (tempval & 0x7F));
}
}
@@ -1827,10 +1827,10 @@ static void hal_notch_filter_8188e(struct adapter *adapter, bool enable)
{
if (enable) {
DBG_88E("Enable notch filter\n");
- usb_write8(adapter, rOFDM0_RxDSP+1, rtw_read8(adapter, rOFDM0_RxDSP+1) | BIT1);
+ usb_write8(adapter, rOFDM0_RxDSP+1, usb_read8(adapter, rOFDM0_RxDSP+1) | BIT1);
} else {
DBG_88E("Disable notch filter\n");
- usb_write8(adapter, rOFDM0_RxDSP+1, rtw_read8(adapter, rOFDM0_RxDSP+1) & ~BIT1);
+ usb_write8(adapter, rOFDM0_RxDSP+1, usb_read8(adapter, rOFDM0_RxDSP+1) & ~BIT1);
}
}
void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc)
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c b/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
index 868fa68..9f016a5 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
@@ -792,8 +792,8 @@ _PHY_SetBWMode92C(
/* 3<1>Set MAC register */
/* 3 */
- regBwOpMode = rtw_read8(Adapter, REG_BWOPMODE);
- regRRSR_RSC = rtw_read8(Adapter, REG_RRSR+2);
+ regBwOpMode = usb_read8(Adapter, REG_BWOPMODE);
+ regRRSR_RSC = usb_read8(Adapter, REG_RRSR+2);
switch (pHalData->CurrentChannelBW) {
case HT_CHANNEL_WIDTH_20:
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c b/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c
index 3971b70..ab07a6c 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c
@@ -34,7 +34,7 @@ void SwLedOn(struct adapter *padapter, struct LED_871x *pLed)
if (padapter->bSurpriseRemoved || padapter->bDriverStopped)
return;
- LedCfg = rtw_read8(padapter, REG_LEDCFG2);
+ LedCfg = usb_read8(padapter, REG_LEDCFG2);
usb_write8(padapter, REG_LEDCFG2, (LedCfg&0xf0)|BIT5|BIT6); /* SW control led0 on. */
pLed->bLedOn = true;
}
@@ -49,13 +49,13 @@ void SwLedOff(struct adapter *padapter, struct LED_871x *pLed)
if (padapter->bSurpriseRemoved || padapter->bDriverStopped)
goto exit;
- LedCfg = rtw_read8(padapter, REG_LEDCFG2);/* 0x4E */
+ LedCfg = usb_read8(padapter, REG_LEDCFG2);/* 0x4E */
if (pHalData->bLedOpenDrain) {
/* Open-drain arrangement for controlling the LED) */
LedCfg &= 0x90; /* Set to software control. */
usb_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3));
- LedCfg = rtw_read8(padapter, REG_MAC_PINMUX_CFG);
+ LedCfg = usb_read8(padapter, REG_MAC_PINMUX_CFG);
LedCfg &= 0xFE;
usb_write8(padapter, REG_MAC_PINMUX_CFG, LedCfg);
} else {
diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c b/drivers/staging/rtl8188eu/hal/usb_halinit.c
index 4f4bf7f..03701ca 100644
--- a/drivers/staging/rtl8188eu/hal/usb_halinit.c
+++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c
@@ -152,7 +152,7 @@ static void _InitInterrupt(struct adapter *Adapter)
/* REG_USB_SPECIAL_OPTION - BIT(4) */
/* 0; Use interrupt endpoint to upload interrupt pkt */
/* 1; Use bulk endpoint to upload interrupt pkt, */
- usb_opt = rtw_read8(Adapter, REG_USB_SPECIAL_OPTION);
+ usb_opt = usb_read8(Adapter, REG_USB_SPECIAL_OPTION);
if (!adapter_to_dvobj(Adapter)->ishighspeed)
usb_opt = usb_opt & (~INT_BULK_SEL);
@@ -437,7 +437,7 @@ static void _InitRetryFunction(struct adapter *Adapter)
{
u8 value8;
- value8 = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL);
+ value8 = usb_read8(Adapter, REG_FWHW_TXQ_CTRL);
value8 |= EN_AMPDU_RTY_NEW;
usb_write8(Adapter, REG_FWHW_TXQ_CTRL, value8);
@@ -501,8 +501,8 @@ usb_AggSettingRxUpdate(
u8 valueDMA;
u8 valueUSB;
- valueDMA = rtw_read8(Adapter, REG_TRXDMA_CTRL);
- valueUSB = rtw_read8(Adapter, REG_USB_SPECIAL_OPTION);
+ valueDMA = usb_read8(Adapter, REG_TRXDMA_CTRL);
+ valueUSB = usb_read8(Adapter, REG_USB_SPECIAL_OPTION);
switch (haldata->UsbRxAggMode) {
case USB_RX_AGG_DMA:
@@ -598,11 +598,11 @@ static void _InitBeaconParameters(struct adapter *Adapter)
/* beacause test chip does not contension before sending beacon. by tynli. 2009.11.03 */
usb_write16(Adapter, REG_BCNTCFG, 0x660F);
- haldata->RegBcnCtrlVal = rtw_read8(Adapter, REG_BCN_CTRL);
- haldata->RegTxPause = rtw_read8(Adapter, REG_TXPAUSE);
- haldata->RegFwHwTxQCtrl = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL+2);
- haldata->RegReg542 = rtw_read8(Adapter, REG_TBTT_PROHIBIT+2);
- haldata->RegCR_1 = rtw_read8(Adapter, REG_CR+1);
+ haldata->RegBcnCtrlVal = usb_read8(Adapter, REG_BCN_CTRL);
+ haldata->RegTxPause = usb_read8(Adapter, REG_TXPAUSE);
+ haldata->RegFwHwTxQCtrl = usb_read8(Adapter, REG_FWHW_TXQ_CTRL+2);
+ haldata->RegReg542 = usb_read8(Adapter, REG_TBTT_PROHIBIT+2);
+ haldata->RegCR_1 = usb_read8(Adapter, REG_CR+1);
}
static void _BeaconFunctionEnable(struct adapter *Adapter,
@@ -664,12 +664,12 @@ enum rt_rf_power_state RfOnOffDetect(struct adapter *adapt)
enum rt_rf_power_state rfpowerstate = rf_off;
if (adapt->pwrctrlpriv.bHWPowerdown) {
- val8 = rtw_read8(adapt, REG_HSISR);
+ val8 = usb_read8(adapt, REG_HSISR);
DBG_88E("pwrdown, 0x5c(BIT7)=%02x\n", val8);
rfpowerstate = (val8 & BIT7) ? rf_off : rf_on;
} else { /* rf on/off */
- usb_write8(adapt, REG_MAC_PINMUX_CFG, rtw_read8(adapt, REG_MAC_PINMUX_CFG)&~(BIT3));
- val8 = rtw_read8(adapt, REG_GPIO_IO_SEL);
+ usb_write8(adapt, REG_MAC_PINMUX_CFG, usb_read8(adapt, REG_MAC_PINMUX_CFG)&~(BIT3));
+ val8 = usb_read8(adapt, REG_GPIO_IO_SEL);
DBG_88E("GPIO_IN=%02x\n", val8);
rfpowerstate = (val8 & BIT3) ? rf_on : rf_off;
}
@@ -832,7 +832,7 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter)
/* Enable TX Report */
/* Enable Tx Report Timer */
- value8 = rtw_read8(Adapter, REG_TX_RPT_CTRL);
+ value8 = usb_read8(Adapter, REG_TX_RPT_CTRL);
usb_write8(Adapter, REG_TX_RPT_CTRL, (value8|BIT1|BIT0));
/* Set MAX RPT MACID */
usb_write8(Adapter, REG_TX_RPT_CTRL+1, 2);/* FOR sta mode ,0: bc/mc ,1:AP */
@@ -950,7 +950,7 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("CardDisableRTL8188EU\n"));
/* Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */
- val8 = rtw_read8(Adapter, REG_TX_RPT_CTRL);
+ val8 = usb_read8(Adapter, REG_TX_RPT_CTRL);
usb_write8(Adapter, REG_TX_RPT_CTRL, val8&(~BIT1));
/* stop rx */
@@ -961,10 +961,10 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
/* 2. 0x1F[7:0] = 0 turn off RF */
- val8 = rtw_read8(Adapter, REG_MCUFWDL);
+ val8 = usb_read8(Adapter, REG_MCUFWDL);
if ((val8 & RAM_DL_SEL) && Adapter->bFWReady) { /* 8051 RAM code */
/* Reset MCU 0x2[10]=0. */
- val8 = rtw_read8(Adapter, REG_SYS_FUNC_EN+1);
+ val8 = usb_read8(Adapter, REG_SYS_FUNC_EN+1);
val8 &= ~BIT(2); /* 0x2[10], FEN_CPUEN */
usb_write8(Adapter, REG_SYS_FUNC_EN+1, val8);
}
@@ -974,26 +974,26 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
/* YJ,add,111212 */
/* Disable 32k */
- val8 = rtw_read8(Adapter, REG_32K_CTRL);
+ val8 = usb_read8(Adapter, REG_32K_CTRL);
usb_write8(Adapter, REG_32K_CTRL, val8&(~BIT0));
/* Card disable power action flow */
HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_DISABLE_FLOW);
/* Reset MCU IO Wrapper */
- val8 = rtw_read8(Adapter, REG_RSV_CTRL+1);
+ val8 = usb_read8(Adapter, REG_RSV_CTRL+1);
usb_write8(Adapter, REG_RSV_CTRL+1, (val8&(~BIT3)));
- val8 = rtw_read8(Adapter, REG_RSV_CTRL+1);
+ val8 = usb_read8(Adapter, REG_RSV_CTRL+1);
usb_write8(Adapter, REG_RSV_CTRL+1, val8|BIT3);
/* YJ,test add, 111207. For Power Consumption. */
- val8 = rtw_read8(Adapter, GPIO_IN);
+ val8 = usb_read8(Adapter, GPIO_IN);
usb_write8(Adapter, GPIO_OUT, val8);
usb_write8(Adapter, GPIO_IO_SEL, 0xFF);/* Reg0x46 */
- val8 = rtw_read8(Adapter, REG_GPIO_IO_SEL);
+ val8 = usb_read8(Adapter, REG_GPIO_IO_SEL);
usb_write8(Adapter, REG_GPIO_IO_SEL, (val8<<4));
- val8 = rtw_read8(Adapter, REG_GPIO_IO_SEL+1);
+ val8 = usb_read8(Adapter, REG_GPIO_IO_SEL+1);
usb_write8(Adapter, REG_GPIO_IO_SEL+1, val8|0x0F);/* Reg0x43 */
usb_write32(Adapter, REG_BB_PAD_CTRL, 0x00080808);/* set LNA ,TRSW,EX_PA Pin to output mode */
haldata->bMacPwrCtrlOn = false;
@@ -1164,7 +1164,7 @@ static void _ReadPROMContent(
u8 eeValue;
/* check system boot selection */
- eeValue = rtw_read8(Adapter, REG_9346CR);
+ eeValue = usb_read8(Adapter, REG_9346CR);
eeprom->EepromOrEfuse = (eeValue & BOOT_FROM_EEPROM) ? true : false;
eeprom->bautoload_fail_flag = (eeValue & EEPROM_EN) ? false : true;
@@ -1235,10 +1235,10 @@ static void hw_var_set_opmode(struct adapter *Adapter, u8 variable, u8 *val)
u8 mode = *((u8 *)val);
/* disable Port0 TSF update */
- usb_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4));
+ usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL)|BIT(4));
/* set net_type */
- val8 = rtw_read8(Adapter, MSR)&0x0c;
+ val8 = usb_read8(Adapter, MSR)&0x0c;
val8 |= mode;
usb_write8(Adapter, MSR, val8);
@@ -1275,14 +1275,14 @@ static void hw_var_set_opmode(struct adapter *Adapter, u8 variable, u8 *val)
usb_write8(Adapter, REG_DUAL_TSF_RST, BIT(0));
/* BIT3 - If set 0, hw will clr bcnq when tx becon ok/fail or port 0 */
- usb_write8(Adapter, REG_MBID_NUM, rtw_read8(Adapter, REG_MBID_NUM) | BIT(3) | BIT(4));
+ usb_write8(Adapter, REG_MBID_NUM, usb_read8(Adapter, REG_MBID_NUM) | BIT(3) | BIT(4));
/* enable BCN0 Function for if1 */
/* don't enable update TSF0 for if1 (due to TSF update when beacon/probe rsp are received) */
usb_write8(Adapter, REG_BCN_CTRL, (DIS_TSF_UDT0_NORMAL_CHIP|EN_BCN_FUNCTION | BIT(1)));
/* dis BCN1 ATIM WND if if2 is station */
- usb_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1) | BIT(0));
+ usb_write8(Adapter, REG_BCN_CTRL_1, usb_read8(Adapter, REG_BCN_CTRL_1) | BIT(0));
}
}
@@ -1317,7 +1317,7 @@ static void hw_var_set_bcn_func(struct adapter *Adapter, u8 variable, u8 *val)
if (*((u8 *)val))
usb_write8(Adapter, bcn_ctrl_reg, (EN_BCN_FUNCTION | EN_TXBCN_RPT));
else
- usb_write8(Adapter, bcn_ctrl_reg, rtw_read8(Adapter, bcn_ctrl_reg)&(~(EN_BCN_FUNCTION | EN_TXBCN_RPT)));
+ usb_write8(Adapter, bcn_ctrl_reg, usb_read8(Adapter, bcn_ctrl_reg)&(~(EN_BCN_FUNCTION | EN_TXBCN_RPT)));
}
static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
@@ -1331,7 +1331,7 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
{
u8 val8;
- val8 = rtw_read8(Adapter, MSR)&0x0c;
+ val8 = usb_read8(Adapter, MSR)&0x0c;
val8 |= *((u8 *)val);
usb_write8(Adapter, MSR, val8);
}
@@ -1340,7 +1340,7 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
{
u8 val8;
- val8 = rtw_read8(Adapter, MSR) & 0x03;
+ val8 = usb_read8(Adapter, MSR) & 0x03;
val8 |= *((u8 *)val) << 2;
usb_write8(Adapter, MSR, val8);
}
@@ -1378,7 +1378,7 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
/* Set RRSR rate table. */
usb_write8(Adapter, REG_RRSR, BrateCfg & 0xff);
usb_write8(Adapter, REG_RRSR+1, (BrateCfg >> 8) & 0xff);
- usb_write8(Adapter, REG_RRSR+2, rtw_read8(Adapter, REG_RRSR+2)&0xf0);
+ usb_write8(Adapter, REG_RRSR+2, usb_read8(Adapter, REG_RRSR+2)&0xf0);
/* Set RTS initial rate */
while (BrateCfg > 0x1) {
@@ -1407,13 +1407,13 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
StopTxBeacon(Adapter);
/* disable related TSF function */
- usb_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(3)));
+ usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL)&(~BIT(3)));
usb_write32(Adapter, REG_TSFTR, tsf);
usb_write32(Adapter, REG_TSFTR+4, tsf>>32);
/* enable related TSF function */
- usb_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(3));
+ usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL)|BIT(3));
if (((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE))
ResumeTxBeacon(Adapter);
@@ -1441,7 +1441,7 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
usb_write8(Adapter, REG_DUAL_TSF_RST, (BIT(0)|BIT(1)));
/* disable update TSF */
- usb_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4));
+ usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL)|BIT(4));
break;
case HW_VAR_MLME_SITESURVEY:
if (*((u8 *)val)) { /* under sitesurvey */
@@ -1453,7 +1453,7 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
usb_write16(Adapter, REG_RXFLTMAP2, 0x00);
/* disable update TSF */
- usb_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4));
+ usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL)|BIT(4));
} else { /* sitesurvey done */
struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv;
struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
@@ -1464,11 +1464,11 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
usb_write16(Adapter, REG_RXFLTMAP2, 0xFFFF);
/* enable update TSF */
- usb_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
+ usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
} else if ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) {
usb_write16(Adapter, REG_RXFLTMAP2, 0xFFFF);
/* enable update TSF */
- usb_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
+ usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
}
if ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) {
usb_write32(Adapter, REG_RCR, usb_read32(Adapter, REG_RCR)|RCR_CBSSID_BCN);
@@ -1511,7 +1511,7 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
} else if (type == 2) {
/* sta add event call back */
/* enable update TSF */
- usb_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
+ usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
if (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE))
RetryLimit = 0x7;
@@ -1641,7 +1641,7 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
case HW_VAR_ACM_CTRL:
{
u8 acm_ctrl = *((u8 *)val);
- u8 AcmCtrl = rtw_read8(Adapter, REG_ACMHWCTRL);
+ u8 AcmCtrl = usb_read8(Adapter, REG_ACMHWCTRL);
if (acm_ctrl > 1)
AcmCtrl = AcmCtrl | 0x1;
@@ -1689,7 +1689,7 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
}
if (MinSpacingToSet < SecMinSpace)
MinSpacingToSet = SecMinSpace;
- usb_write8(Adapter, REG_AMPDU_MIN_SPACE, (rtw_read8(Adapter, REG_AMPDU_MIN_SPACE) & 0xf8) | MinSpacingToSet);
+ usb_write8(Adapter, REG_AMPDU_MIN_SPACE, (usb_read8(Adapter, REG_AMPDU_MIN_SPACE) & 0xf8) | MinSpacingToSet);
}
}
break;
@@ -1838,7 +1838,7 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
break;
case HW_VAR_BCN_VALID:
/* BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2, write 1 to clear, Clear by sw */
- usb_write8(Adapter, REG_TDECTRL+2, rtw_read8(Adapter, REG_TDECTRL+2) | BIT0);
+ usb_write8(Adapter, REG_TDECTRL+2, usb_read8(Adapter, REG_TDECTRL+2) | BIT0);
break;
default:
break;
@@ -1854,11 +1854,11 @@ static void GetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
case HW_VAR_BASIC_RATE:
*((u16 *)(val)) = haldata->BasicRateSet;
case HW_VAR_TXPAUSE:
- val[0] = rtw_read8(Adapter, REG_TXPAUSE);
+ val[0] = usb_read8(Adapter, REG_TXPAUSE);
break;
case HW_VAR_BCN_VALID:
/* BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2 */
- val[0] = (BIT0 & rtw_read8(Adapter, REG_TDECTRL+2)) ? true : false;
+ val[0] = (BIT0 & usb_read8(Adapter, REG_TDECTRL+2)) ? true : false;
break;
case HW_VAR_DM_FLAG:
val[0] = podmpriv->SupportAbility;
@@ -2032,7 +2032,7 @@ static u8 SetHalDefVar8188EUsb(struct adapter *Adapter, enum hal_def_variable eV
} else if (dm_func == 6) {/* turn on all dynamic func */
if (!(podmpriv->SupportAbility & DYNAMIC_BB_DIG)) {
struct rtw_dig *pDigTable = &podmpriv->DM_DigTable;
- pDigTable->CurIGValue = rtw_read8(Adapter, 0xc50);
+ pDigTable->CurIGValue = usb_read8(Adapter, 0xc50);
}
podmpriv->SupportAbility = DYNAMIC_ALL_FUNC_ENABLE;
DBG_88E("==> Turn on all dynamic function...\n");
@@ -2184,7 +2184,7 @@ static void SetBeaconRelatedRegisters8188EUsb(struct adapter *adapt)
ResumeTxBeacon(adapt);
- usb_write8(adapt, bcn_ctrl_reg, rtw_read8(adapt, bcn_ctrl_reg)|BIT(1));
+ usb_write8(adapt, bcn_ctrl_reg, usb_read8(adapt, bcn_ctrl_reg)|BIT(1));
}
static void rtl8188eu_init_default_value(struct adapter *adapt)
diff --git a/drivers/staging/rtl8188eu/hal/usb_ops_linux.c b/drivers/staging/rtl8188eu/hal/usb_ops_linux.c
index d5d9288..d0c82dc 100644
--- a/drivers/staging/rtl8188eu/hal/usb_ops_linux.c
+++ b/drivers/staging/rtl8188eu/hal/usb_ops_linux.c
@@ -115,7 +115,7 @@ exit:
return status;
}
-static u8 usb_read8(struct adapter *adapter, u32 addr)
+u8 usb_read8(struct adapter *adapter, u32 addr)
{
u8 request;
u8 requesttype;
@@ -666,5 +666,4 @@ void rtl8188eu_xmit_tasklet(void *priv)
void rtl8188eu_set_intf_ops(struct _io_ops *pops)
{
_rtw_memset((u8 *)pops, 0, sizeof(struct _io_ops));
- pops->_read8 = &usb_read8;
}
diff --git a/drivers/staging/rtl8188eu/include/rtw_io.h b/drivers/staging/rtl8188eu/include/rtw_io.h
index 63b1ff0..ef865da 100644
--- a/drivers/staging/rtl8188eu/include/rtw_io.h
+++ b/drivers/staging/rtl8188eu/include/rtw_io.h
@@ -44,7 +44,6 @@ struct intf_priv;
struct intf_hdl;
struct _io_ops {
- u8 (*_read8)(struct adapter *pintfhdl, u32 addr);
};
struct io_req {
@@ -76,7 +75,7 @@ struct io_priv {
struct intf_hdl intf;
};
-u8 _rtw_read8(struct adapter *adapter, u32 addr);
+u8 usb_read8(struct adapter *adapter, u32 addr);
u16 usb_read16(struct adapter *adapter, u32 addr);
u32 usb_read32(struct adapter *adapter, u32 addr);
u32 usb_read_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
@@ -90,7 +89,6 @@ int usb_writeN(struct adapter *adapter, u32 addr, u32 length, u8 *pdata);
u32 usb_write_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
void usb_write_port_cancel(struct adapter *adapter);
-#define rtw_read8(adapter, addr) _rtw_read8((adapter), (addr))
int rtw_init_io_priv(struct adapter *padapter,
void (*set_intf_ops)(struct _io_ops *pops));
diff --git a/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c b/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
index fd888cb..11b71ec 100644
--- a/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
+++ b/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
@@ -2179,7 +2179,7 @@ static int rtw_wx_read32(struct net_device *dev,
switch (bytes) {
case 1:
- data32 = rtw_read8(padapter, addr);
+ data32 = usb_read8(padapter, addr);
sprintf(extra, "0x%02X", data32);
break;
case 2:
@@ -2353,7 +2353,7 @@ static void rtw_dbg_mode_hdl(struct adapter *padapter, u32 id, u8 *pdata, u32 le
RegRWStruct = (struct mp_rw_reg *)pdata;
switch (RegRWStruct->width) {
case 1:
- RegRWStruct->value = rtw_read8(padapter, RegRWStruct->offset);
+ RegRWStruct->value = usb_read8(padapter, RegRWStruct->offset);
break;
case 2:
RegRWStruct->value = usb_read16(padapter, RegRWStruct->offset);
@@ -4109,7 +4109,7 @@ static int rtw_dbg_port(struct net_device *dev,
case 0x70:/* read_reg */
switch (minor_cmd) {
case 1:
- DBG_88E("rtw_read8(0x%x) = 0x%02x\n", arg, rtw_read8(padapter, arg));
+ DBG_88E("usb_read8(0x%x) = 0x%02x\n", arg, usb_read8(padapter, arg));
break;
case 2:
DBG_88E("usb_read16(0x%x) = 0x%04x\n", arg, usb_read16(padapter, arg));
@@ -4123,7 +4123,7 @@ static int rtw_dbg_port(struct net_device *dev,
switch (minor_cmd) {
case 1:
usb_write8(padapter, arg, extra_arg);
- DBG_88E("usb_write8(0x%x) = 0x%02x\n", arg, rtw_read8(padapter, arg));
+ DBG_88E("usb_write8(0x%x) = 0x%02x\n", arg, usb_read8(padapter, arg));
break;
case 2:
usb_write16(padapter, arg, extra_arg);
@@ -4227,7 +4227,7 @@ static int rtw_dbg_port(struct net_device *dev,
if (_SUCCESS != rtw_IOL_exec_cmds_sync(padapter, xmit_frame, 5000, 0))
ret = -EPERM;
- final = rtw_read8(padapter, reg);
+ final = usb_read8(padapter, reg);
if (start_value+write_num-1 == final)
DBG_88E("continuous IOL_CMD_WB_REG to 0x%x %u times Success, start:%u, final:%u\n", reg, write_num, start_value, final);
else
@@ -4577,13 +4577,13 @@ static int rtw_dbg_port(struct net_device *dev,
case 0xfd:
usb_write8(padapter, 0xc50, arg);
- DBG_88E("wr(0xc50) = 0x%x\n", rtw_read8(padapter, 0xc50));
+ DBG_88E("wr(0xc50) = 0x%x\n", usb_read8(padapter, 0xc50));
usb_write8(padapter, 0xc58, arg);
- DBG_88E("wr(0xc58) = 0x%x\n", rtw_read8(padapter, 0xc58));
+ DBG_88E("wr(0xc58) = 0x%x\n", usb_read8(padapter, 0xc58));
break;
case 0xfe:
- DBG_88E("rd(0xc50) = 0x%x\n", rtw_read8(padapter, 0xc50));
- DBG_88E("rd(0xc58) = 0x%x\n", rtw_read8(padapter, 0xc58));
+ DBG_88E("rd(0xc50) = 0x%x\n", usb_read8(padapter, 0xc50));
+ DBG_88E("rd(0xc58) = 0x%x\n", usb_read8(padapter, 0xc58));
break;
case 0xff:
DBG_88E("dbg(0x210) = 0x%x\n", usb_read32(padapter, 0x210));
@@ -6494,7 +6494,7 @@ static int rtw_mp_read_reg(struct net_device *dev,
switch (width) {
case 'b':
/* 1 byte */
- sprintf(extra, "%d\n", rtw_read8(padapter, addr));
+ sprintf(extra, "%d\n", usb_read8(padapter, addr));
wrqu->length = strlen(extra);
break;
case 'w':
@@ -7078,7 +7078,7 @@ static int rtw_mp_arx(struct net_device *dev,
OFDM_FA = read_bbreg(padapter, 0xda4, 0x0000FFFF);
OFDM_FA = read_bbreg(padapter, 0xda4, 0xFFFF0000);
OFDM_FA = read_bbreg(padapter, 0xda8, 0x0000FFFF);
- CCK_FA = (rtw_read8(padapter, 0xa5b)<<8) | (rtw_read8(padapter, 0xa5c));
+ CCK_FA = (usb_read8(padapter, 0xa5b)<<8) | (usb_read8(padapter, 0xa5c));
sprintf(extra, "Phy Received packet OK:%d CRC error:%d FA Counter: %d", cckok+ofdmok+htok, cckcrc+ofdmcrc+htcrc, OFDM_FA+CCK_FA);
}
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/