Re: [PATCH v2 09/12] blackfin: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)

[Steven Miao]

Applied to 3.16. Thanks.

On Thu, May 1, 2014 at 2:26 PM, Brian Norris
<computersforpeace@xxxxxxxxx> wrote:
> These defconfigs contain the CONFIG_M25P80 symbol, which is now
> dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy
> the new dependency.
>
> At the same time, drop the now-nonexistent CONFIG_MTD_CHAR symbol.
>
> Signed-off-by: Brian Norris <computersforpeace@xxxxxxxxx>
> Cc: Steven Miao <realmz6@xxxxxxxxx>
> Cc: adi-buildroot-devel@xxxxxxxxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> ---
>  arch/blackfin/configs/BF526-EZBRD_defconfig    | 2 +-
>  arch/blackfin/configs/BF527-EZKIT-V2_defconfig | 2 +-
>  arch/blackfin/configs/BF527-EZKIT_defconfig    | 2 +-
>  arch/blackfin/configs/BF548-EZKIT_defconfig    | 2 +-
>  arch/blackfin/configs/BF609-EZKIT_defconfig    | 2 +-
>  arch/blackfin/configs/BlackStamp_defconfig     | 3 +--
>  arch/blackfin/configs/H8606_defconfig          | 3 +--
>  7 files changed, 7 insertions(+), 9 deletions(-)
>
> diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
> index 2f2c6acf210c..530ba7a6d7b0 100644
> --- a/arch/blackfin/configs/BF526-EZBRD_defconfig
> +++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
> @@ -53,7 +53,6 @@ CONFIG_IP_PNP=y
>  CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
>  # CONFIG_FW_LOADER is not set
>  CONFIG_MTD=y
> -CONFIG_MTD_CHAR=y
>  CONFIG_MTD_BLOCK=y
>  CONFIG_MTD_CFI=y
>  CONFIG_MTD_CFI_INTELEXT=y
> @@ -63,6 +62,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
>  CONFIG_MTD_PHYSMAP=y
>  CONFIG_MTD_M25P80=y
>  CONFIG_MTD_NAND=m
> +CONFIG_MTD_SPI_NOR=y
>  CONFIG_BLK_DEV_RAM=y
>  CONFIG_SCSI=y
>  # CONFIG_SCSI_PROC_FS is not set
> diff --git a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
> index 91535c38e7f2..a21c79275eae 100644
> --- a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
> +++ b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
> @@ -58,7 +58,6 @@ CONFIG_BFIN_SIR0=y
>  CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
>  # CONFIG_FW_LOADER is not set
>  CONFIG_MTD=y
> -CONFIG_MTD_CHAR=m
>  CONFIG_MTD_BLOCK=y
>  CONFIG_MTD_JEDECPROBE=m
>  CONFIG_MTD_RAM=y
> @@ -66,6 +65,7 @@ CONFIG_MTD_ROM=m
>  CONFIG_MTD_COMPLEX_MAPPINGS=y
>  CONFIG_MTD_M25P80=y
>  CONFIG_MTD_NAND=m
> +CONFIG_MTD_SPI_NOR=y
>  CONFIG_BLK_DEV_RAM=y
>  CONFIG_SCSI=y
>  # CONFIG_SCSI_PROC_FS is not set
> diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
> index af2738c7441b..5070a860d8c4 100644
> --- a/arch/blackfin/configs/BF527-EZKIT_defconfig
> +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
> @@ -57,7 +57,6 @@ CONFIG_BFIN_SIR0=y
>  CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
>  # CONFIG_FW_LOADER is not set
>  CONFIG_MTD=y
> -CONFIG_MTD_CHAR=m
>  CONFIG_MTD_BLOCK=y
>  CONFIG_MTD_JEDECPROBE=m
>  CONFIG_MTD_RAM=y
> @@ -65,6 +64,7 @@ CONFIG_MTD_ROM=m
>  CONFIG_MTD_COMPLEX_MAPPINGS=y
>  CONFIG_MTD_M25P80=y
>  CONFIG_MTD_NAND=m
> +CONFIG_MTD_SPI_NOR=y
>  CONFIG_BLK_DEV_RAM=y
>  CONFIG_SCSI=y
>  # CONFIG_SCSI_PROC_FS is not set
> diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
> index e716fdfd2cf2..efb293057287 100644
> --- a/arch/blackfin/configs/BF548-EZKIT_defconfig
> +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
> @@ -64,7 +64,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
>  CONFIG_FW_LOADER=m
>  CONFIG_MTD=y
>  CONFIG_MTD_CMDLINE_PARTS=y
> -CONFIG_MTD_CHAR=y
>  CONFIG_MTD_BLOCK=y
>  CONFIG_MTD_CFI=y
>  CONFIG_MTD_CFI_INTELEXT=y
> @@ -75,6 +74,7 @@ CONFIG_MTD_M25P80=y
>  CONFIG_MTD_NAND=y
>  CONFIG_MTD_NAND_BF5XX=y
>  # CONFIG_MTD_NAND_BF5XX_HWECC is not set
> +CONFIG_MTD_SPI_NOR=y
>  CONFIG_BLK_DEV_RAM=y
>  # CONFIG_SCSI_PROC_FS is not set
>  CONFIG_BLK_DEV_SD=y
> diff --git a/arch/blackfin/configs/BF609-EZKIT_defconfig b/arch/blackfin/configs/BF609-EZKIT_defconfig
> index 4ca39ab6b2bf..a7e9bfd84183 100644
> --- a/arch/blackfin/configs/BF609-EZKIT_defconfig
> +++ b/arch/blackfin/configs/BF609-EZKIT_defconfig
> @@ -57,7 +57,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
>  CONFIG_FW_LOADER=m
>  CONFIG_MTD=y
>  CONFIG_MTD_CMDLINE_PARTS=y
> -CONFIG_MTD_CHAR=y
>  CONFIG_MTD_BLOCK=y
>  CONFIG_MTD_CFI=y
>  CONFIG_MTD_CFI_INTELEXT=y
> @@ -65,6 +64,7 @@ CONFIG_MTD_CFI_STAA=y
>  CONFIG_MTD_COMPLEX_MAPPINGS=y
>  CONFIG_MTD_PHYSMAP=y
>  CONFIG_MTD_M25P80=y
> +CONFIG_MTD_SPI_NOR=y
>  CONFIG_MTD_UBI=m
>  CONFIG_SCSI=y
>  CONFIG_BLK_DEV_SD=y
> diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
> index 3853c473b443..f4a9200e1ab1 100644
> --- a/arch/blackfin/configs/BlackStamp_defconfig
> +++ b/arch/blackfin/configs/BlackStamp_defconfig
> @@ -45,7 +45,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
>  # CONFIG_FW_LOADER is not set
>  CONFIG_MTD=y
>  CONFIG_MTD_CMDLINE_PARTS=y
> -CONFIG_MTD_CHAR=m
>  CONFIG_MTD_BLOCK=y
>  CONFIG_MTD_CFI=m
>  CONFIG_MTD_CFI_AMDSTD=m
> @@ -53,7 +52,7 @@ CONFIG_MTD_RAM=y
>  CONFIG_MTD_ROM=m
>  CONFIG_MTD_COMPLEX_MAPPINGS=y
>  CONFIG_MTD_M25P80=y
> -# CONFIG_M25PXX_USE_FAST_READ is not set
> +CONFIG_MTD_SPI_NOR=y
>  CONFIG_BLK_DEV_LOOP=y
>  CONFIG_BLK_DEV_NBD=y
>  CONFIG_BLK_DEV_RAM=y
> diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
> index f754e490bbfd..0ff97d8d047a 100644
> --- a/arch/blackfin/configs/H8606_defconfig
> +++ b/arch/blackfin/configs/H8606_defconfig
> @@ -36,13 +36,12 @@ CONFIG_IRTTY_SIR=m
>  # CONFIG_WIRELESS is not set
>  # CONFIG_FW_LOADER is not set
>  CONFIG_MTD=y
> -CONFIG_MTD_CHAR=y
>  CONFIG_MTD_BLOCK=y
>  CONFIG_MTD_RAM=y
>  CONFIG_MTD_ROM=y
>  CONFIG_MTD_COMPLEX_MAPPINGS=y
>  CONFIG_MTD_M25P80=y
> -# CONFIG_M25PXX_USE_FAST_READ is not set
> +CONFIG_MTD_SPI_NOR=y
>  CONFIG_BLK_DEV_RAM=y
>  CONFIG_MISC_DEVICES=y
>  CONFIG_EEPROM_AT25=y
> --
> 1.8.3.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/