Re: [PATCH] rcu: Only pin GP kthread when full dynticks is actually used

[Paul E. McKenney]

On Fri, Jun 13, 2014 at 02:16:59AM +0200, Frederic Weisbecker wrote:
> CONFIG_NO_HZ_FULL may be enabled widely on distros nowadays but actual
> users should be a tiny minority, if actually any.
> 
> Also there is a risk that affining the GP kthread to a single CPU could
> end up noticeably reducing RCU performances and increasing energy
> consumption.
> 
> So lets affine the GP kthread only when nohz full is actually used
> (ie: when the nohz_full= parameter is filled or CONFIG_NO_HZ_FULL_ALL=y)
> 
> Signed-off-by: Frederic Weisbecker <fweisbec@xxxxxxxxx>
> Cc: Josh Triplett <josh@xxxxxxxxxxxxxxxx>
> Cc: Steven Rostedt <rostedt@xxxxxxxxxxx>
> Cc: Mathieu Desnoyers <mathieu.desnoyers@xxxxxxxxxxxx>
> ---
>  kernel/rcu/tree_plugin.h | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
> index cbc2c45..726f52c 100644
> --- a/kernel/rcu/tree_plugin.h
> +++ b/kernel/rcu/tree_plugin.h
> @@ -2843,12 +2843,16 @@ static bool rcu_nohz_full_cpu(struct rcu_state *rsp)
>   */
>  static void rcu_bind_gp_kthread(void)
>  {
> -#ifdef CONFIG_NO_HZ_FULL
> -	int cpu = ACCESS_ONCE(tick_do_timer_cpu);
> +	int cpu;
> +
> +	if (!tick_nohz_full_enabled())
> +		return;
> +
> +	cpu = ACCESS_ONCE(tick_do_timer_cpu);
> 
>  	if (cpu < 0 || cpu >= nr_cpu_ids)
>  		return;
> +
>  	if (raw_smp_processor_id() != cpu)
>  		set_cpus_allowed_ptr(current, cpumask_of(cpu));
> -#endif /* #ifdef CONFIG_NO_HZ_FULL */
>  }

Hello, Frederic,

I have the following queued.  Shall I port yours on top of mine, or is
there an issue with mine?

							Thanx, Paul

------------------------------------------------------------------------

rcu: Bind grace-period kthreads to non-NO_HZ_FULL CPUs

Binding the grace-period kthreads to the timekeeping CPU resulted in
significant performance decreases for some workloads.  For more detail,
see:

https://lkml.org/lkml/2014/6/3/395 for benchmark numbers

https://lkml.org/lkml/2014/6/4/218 for CPU statistics

It turns out that it is necessary to bind the grace-period kthreads
to the timekeeping CPU only when all but CPU 0 is a nohz_full CPU
on the one hand or if CONFIG_NO_HZ_FULL_SYSIDLE=y on the other.
In other cases, it suffices to bind the grace-period kthreads to the
set of non-nohz_full CPUs.

This commit therefore creates a tick_nohz_not_full_mask that is the
complement of tick_nohz_full_mask, and then binds the grace-period
kthread to the set of CPUs indicated by this new mask, which covers
the CONFIG_NO_HZ_FULL_SYSIDLE=n case.  The CONFIG_NO_HZ_FULL_SYSIDLE=y
case still binds the grace-period kthreads to the timekeeping CPU.

Reported-by: Jet Chen <jet.chen@xxxxxxxxx>
Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>

diff --git a/include/linux/tick.h b/include/linux/tick.h
index b84773cb9f4c..1fe0c05eee39 100644
--- a/include/linux/tick.h
+++ b/include/linux/tick.h
@@ -162,6 +162,7 @@ static inline u64 get_cpu_iowait_time_us(int cpu, u64 *unused) { return -1; }
 #ifdef CONFIG_NO_HZ_FULL
 extern bool tick_nohz_full_running;
 extern cpumask_var_t tick_nohz_full_mask;
+extern cpumask_var_t tick_nohz_not_full_mask;
 
 static inline bool tick_nohz_full_enabled(void)
 {
diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
index 7ce734040a5e..ec7627becaf0 100644
--- a/kernel/rcu/tree_plugin.h
+++ b/kernel/rcu/tree_plugin.h
@@ -2863,7 +2863,12 @@ static void rcu_bind_gp_kthread(void)
 
 	if (cpu < 0 || cpu >= nr_cpu_ids)
 		return;
+#ifdef CONFIG_NO_HZ_FULL_SYSIDLE
 	if (raw_smp_processor_id() != cpu)
 		set_cpus_allowed_ptr(current, cpumask_of(cpu));
+#else /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
+	if (!cpumask_test_cpu(raw_smp_processor_id(), tick_nohz_not_full_mask))
+		set_cpus_allowed_ptr(current, tick_nohz_not_full_mask);
+#endif /* #else #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
 #endif /* #ifdef CONFIG_NO_HZ_FULL */
 }
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 9f8af69c67ec..02209e957e76 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -151,6 +151,7 @@ static void tick_sched_handle(struct tick_sched *ts, struct pt_regs *regs)
 
 #ifdef CONFIG_NO_HZ_FULL
 cpumask_var_t tick_nohz_full_mask;
+cpumask_var_t tick_nohz_not_full_mask;
 bool tick_nohz_full_running;
 
 static bool can_stop_full_tick(void)
@@ -278,6 +279,7 @@ static int __init tick_nohz_full_setup(char *str)
 	int cpu;
 
 	alloc_bootmem_cpumask_var(&tick_nohz_full_mask);
+	alloc_bootmem_cpumask_var(&tick_nohz_not_full_mask);
 	if (cpulist_parse(str, tick_nohz_full_mask) < 0) {
 		pr_warning("NOHZ: Incorrect nohz_full cpumask\n");
 		return 1;
@@ -288,6 +290,8 @@ static int __init tick_nohz_full_setup(char *str)
 		pr_warning("NO_HZ: Clearing %d from nohz_full range for timekeeping\n", cpu);
 		cpumask_clear_cpu(cpu, tick_nohz_full_mask);
 	}
+	cpumask_andnot(tick_nohz_not_full_mask,
+		       cpu_possible_mask, tick_nohz_full_mask);
 	tick_nohz_full_running = true;
 
 	return 1;
@@ -332,6 +336,8 @@ static int tick_nohz_init_all(void)
 	err = 0;
 	cpumask_setall(tick_nohz_full_mask);
 	cpumask_clear_cpu(smp_processor_id(), tick_nohz_full_mask);
+	cpumask_clear(tick_nohz_not_full_mask);
+	cpumask_set_cpu(smp_processor_id(), tick_nohz_not_full_mask);
 	tick_nohz_full_running = true;
 #endif
 	return err;

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/