Re: [PATCH 1/2] ahci: Check and set 64-bit DMA mask for platform AHCI driver

[Hans de Goede]

Hi,

On 06/12/2014 07:40 PM, suravee.suthikulpanit@xxxxxxx wrote:
> From: Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>
> 
> The current platform AHCI driver does not set the dma_mask correctly
> for 64-bit DMA capable AHCI controller. This patch checks the AHCI
> capability bit and set the dma_mask and coherent_dma_mask accordingly.
> 
> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>
> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
> Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>

I see no adverse effects from this on sunxi, please drop the
Reviewed-by: Hans .... tag and replace it with:

Tested-by: Hans de Goede <hdegoede@xxxxxxxxxx>

Regards,

Hans



> ---
>  drivers/ata/libahci_platform.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
> index 3a5b4ed..a958a2b 100644
> --- a/drivers/ata/libahci_platform.c
> +++ b/drivers/ata/libahci_platform.c
> @@ -364,6 +364,19 @@ int ahci_platform_init_host(struct platform_device *pdev,
>  			ap->ops = &ata_dummy_port_ops;
>  	}
>  
> +	if (hpriv->cap & HOST_CAP_64) {
> +		rc = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(64));
> +		if (rc) {
> +			rc = dma_coerce_mask_and_coherent(dev,
> +							  DMA_BIT_MASK(32));
> +			if (rc) {
> +				dev_err(dev, "Failed to enable 64-bit DMA.\n");
> +				return rc;
> +			}
> +			dev_warn(dev, "Enable 32-bit DMA instead of 64-bit.\n");
> +		}
> +	}
> +
>  	rc = ahci_reset_controller(host);
>  	if (rc)
>  		return rc;
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/