Re: [GIT] Networking
From: Dave Jones
Date: Mon Jun 16 2014 - 19:05:12 EST
On Sun, Jun 15, 2014 at 07:33:12PM -0700, David Miller wrote:
> 1) Fix checksumming regressions, from Tom Herbert.
Something still not right for me here.
After about 5 minutes, I get an oops and then instant reboot/lock up.
I haven't managed to get a trace over usb-serial because it seems to
crash before it completes. Hand transcribed one looks like..
rbp: ffff880236403970 r08: 0000000000000000 r09: 0000000000000000
r10: 000000000000005a r11: 00000000000002d7 f12: ffff880233000d80
r13: ffff8800aa1a6fc2 r14: ffff880233001d40 f15: 00000000ffffac82
fs: 0 fs: ffff880236400000 knlGS: 0
CS: 10 DS: 0 ES: 0 CR0: 80050033
CR2: ffff8800aa1a8000 CR3: 1a0d000 CR4: 407f0
Stack:
ffff880236403988 ffffffff81298bbc 00000000000016c0 ffff8802364039e8
ffffffff814ca05a ffff880233001d40 000005a80000e397 ffff880233001680
0000000000000000 0d420685ffffac82 000000000000012a 000000000000004e
Call Trace:
<IRQ>
csum_partial
tcp_gso_segment
inet_gso_segment
? update_dl_migration
skb_mac_gso_segment
__skb_gso_segment
dev_hard_start_xmit
sch_direct_xmit
__dev_queue_xmit
? dev_hard_start_xmit
dev_queue_xmit
ip_finish_output
? ip_output
ip_output
ip_forward_finish
ip_forward
ip_rcv_finish
ip_rcv
__netif_receive_skb_core
? __netif_receive_skb_core
? trace_hardirqs_on
__netif_receive_skb
netif_receive_skb_internal
napi_gro_complete
? napi_gro_complete
dev_gro_receive
? dev_gro_receive
napi_gro_receive
rtl8169_poll
net_rx_action
__do_softirq
irq_exit
do_IRQ
common_interrupt
<EOI>
cpuidle_enter_state
cpuidle_enter
cpu_startup_entry
rest_init
? csum_partial_copy_generic
start_kernel
RIP: do_csum+0x83/0x180
Code: 41 89 d2 74 45 89 d1 45 31 c0 48 89 fa 0f 1f 00 48 03 02 48 13 42
08 48 13 42 10 48 13 42 20 48 13 42 28 48 13 42 30 <48> 13 42 38 4c 11
c0 48 83 c2 40 83 e9 01 75 d5 41 83 ea 01 49
All code
========
0: 41 89 d2 mov %edx,%r10d
3: 74 45 je 0x4a
5: 89 d1 mov %edx,%ecx
7: 45 31 c0 xor %r8d,%r8d
a: 48 89 fa mov %rdi,%rdx
d: 0f 1f 00 nopl (%rax)
10: 48 03 02 add (%rdx),%rax
13: 48 13 42 08 adc 0x8(%rdx),%rax
17: 48 13 42 10 adc 0x10(%rdx),%rax
1b: 48 13 42 20 adc 0x20(%rdx),%rax
1f: 48 13 42 28 adc 0x28(%rdx),%rax
23: 48 13 42 30 adc 0x30(%rdx),%rax
27:* 48 13 42 38 adc 0x38(%rdx),%rax <-- trapping instruction
2b: 4c 11 c0 adc %r8,%rax
2e: 48 83 c2 40 add $0x40,%rdx
32: 83 e9 01 sub $0x1,%ecx
35: 75 d5 jne 0xc
37: 41 83 ea 01 sub $0x1,%r10d
3b: 49 rex.WB
Typical, rdx and rax had scrolled off the screen.
I'll hobble some of the dump_stack output and see if I can get something useful.
It's a two nic (both 8169's) box doing ip-masq and firewall duties.
Dave
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/