Re: [PATCH v4] hwmon: Driver for TI TMP103 temperature sensor

[Heiko Schocher]

Hello Guenter

Am 17.06.2014 12:48, schrieb Guenter Roeck:
> On 06/17/2014 01:11 AM, Heiko Schocher wrote:
> > Driver for the TI TMP103.
> >
> > The TI TMP103 is similar to the TMP102. It differs from the TMP102
> > by having only 8 bit registers.
> >
> > Signed-off-by: Heiko Schocher <hs@xxxxxxx>
> [ ... ]
> > +#define TMP103_CONF_SD (TMP103_CONF_M0 | TMP103_CONF_M1)
>
> Hello Heiko,
>
> I thought this needs to be TMP103_CONF_M1, but from the datasheet it looks
> like it does not matter if M0 is set if M1 is set as well. Did you test it,
> though, to make sure that it works ? I feel slightly uncomfortable with it.

Yes, i tested it on an imx6 based board. I see no issues ... but I can
test it with "#define TMP103_CONF_SD TMP103_CONF_M1" and post a v5 with
this setting if it works ...

bye,
Heiko
--
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/