Re: [PATCH v5 3/3] gpio: Add support for Intel Crystal Cove PMIC

From: Lee Jones
Date: Tue Jun 17 2014 - 11:05:42 EST

Next message: Lee Jones: "[GIT PULL] LinusW - Immutable branch between MFD and GPIO"
Previous message: Nicholas Krause: "[PATCHv2] Check if skb_alloc returns Null in function fw_download_code"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, 03 Jun 2014, Zhu, Lejun wrote:

> Devices based on Intel SoC products such as Baytrail have a Power
> Management IC. In the PMIC there are subsystems for voltage regulation,
> A/D conversion, GPIO and PWMs. The PMIC in Baytrail-T platform is
> called Crystal Cove.
>
> This patch adds support for the GPIO function in Crystal Cove.
>
> Signed-off-by: Yang, Bin <bin.yang@xxxxxxxxx>
> Signed-off-by: Zhu, Lejun <lejun.zhu@xxxxxxxxxxxxxxx>
> Reviewed-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> Reviewed-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
> Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> ---
> v5:
> - Fix the order of doing gpiochip_add() and gpiochip_irqchip_add().
> - Add it to this patch set, to merge it along with the MFD changes.
> ---
> drivers/gpio/Kconfig | 13 ++
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-crystalcove.c | 379 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 393 insertions(+)
> create mode 100644 drivers/gpio/gpio-crystalcove.c

Applied, thanks.

I will send a pull-request out to GPIO momentarily.

> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index a86c49a..fed08d9d 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -440,6 +440,19 @@ config GPIO_ARIZONA
> help
> Support for GPIOs on Wolfson Arizona class devices.
>
> +config GPIO_CRYSTAL_COVE
> + tristate "GPIO support for Crystal Cove PMIC"
> + depends on INTEL_SOC_PMIC
> + select GPIOLIB_IRQCHIP
> + help
> + Support for GPIO pins on Crystal Cove PMIC.
> +
> + Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC
> + inside.
> +
> + This driver can also be built as a module. If so, the module will be
> + called gpio-crystalcove.
> +
> config GPIO_LP3943
> tristate "TI/National Semiconductor LP3943 GPIO expander"
> depends on MFD_LP3943
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 6309aff..e6cd935 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
> obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
> obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
> obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
> +obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o
> obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
> obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o
> obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o
> diff --git a/drivers/gpio/gpio-crystalcove.c b/drivers/gpio/gpio-crystalcove.c
> new file mode 100644
> index 0000000..5a98499
> --- /dev/null
> +++ b/drivers/gpio/gpio-crystalcove.c
> @@ -0,0 +1,379 @@
> +/*
> + * gpio-crystalcove.c - Intel Crystal Cove GPIO Driver
> + *
> + * Copyright (C) 2012, 2014 Intel Corporation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version
> + * 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Author: Yang, Bin <bin.yang@xxxxxxxxx>
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/gpio.h>
> +#include <linux/bitops.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/intel_soc_pmic.h>
> +
> +#define CRYSTALCOVE_GPIO_NUM 16
> +
> +#define UPDATE_IRQ_TYPE BIT(0)
> +#define UPDATE_IRQ_MASK BIT(1)
> +
> +#define GPIO0IRQ 0x0b
> +#define GPIO1IRQ 0x0c
> +#define MGPIO0IRQS0 0x19
> +#define MGPIO1IRQS0 0x1a
> +#define MGPIO0IRQSX 0x1b
> +#define MGPIO1IRQSX 0x1c
> +#define GPIO0P0CTLO 0x2b
> +#define GPIO0P0CTLI 0x33
> +#define GPIO1P0CTLO 0x3b
> +#define GPIO1P0CTLI 0x43
> +
> +#define CTLI_INTCNT_DIS (0)
> +#define CTLI_INTCNT_NE (1 << 1)
> +#define CTLI_INTCNT_PE (2 << 1)
> +#define CTLI_INTCNT_BE (3 << 1)
> +
> +#define CTLO_DIR_IN (0)
> +#define CTLO_DIR_OUT (1 << 5)
> +
> +#define CTLO_DRV_CMOS (0)
> +#define CTLO_DRV_OD (1 << 4)
> +
> +#define CTLO_DRV_REN (1 << 3)
> +
> +#define CTLO_RVAL_2KDW (0)
> +#define CTLO_RVAL_2KUP (1 << 1)
> +#define CTLO_RVAL_50KDW (2 << 1)
> +#define CTLO_RVAL_50KUP (3 << 1)
> +
> +#define CTLO_INPUT_SET (CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP)
> +#define CTLO_OUTPUT_SET (CTLO_DIR_OUT | CTLO_INPUT_SET)
> +
> +enum ctrl_register {
> + CTRL_IN,
> + CTRL_OUT,
> +};
> +
> +/**
> + * struct crystalcove_gpio - Crystal Cove GPIO controller
> + * @buslock: for bus lock/sync and unlock.
> + * @chip: the abstract gpio_chip structure.
> + * @regmap: the regmap from the parent device.
> + * @update: pending IRQ setting update, to be written to the chip upon unlock.
> + * @intcnt_value: the Interrupt Detect value to be written.
> + * @set_irq_mask: true if the IRQ mask needs to be set, false to clear.
> + */
> +struct crystalcove_gpio {
> + struct mutex buslock; /* irq_bus_lock */
> + struct gpio_chip chip;
> + struct regmap *regmap;
> + int update;
> + int intcnt_value;
> + bool set_irq_mask;
> +};
> +
> +static inline struct crystalcove_gpio *to_cg(struct gpio_chip *gc)
> +{
> + return container_of(gc, struct crystalcove_gpio, chip);
> +}
> +
> +static inline int to_reg(int gpio, enum ctrl_register reg_type)
> +{
> + int reg;
> +
> + if (reg_type == CTRL_IN) {
> + if (gpio < 8)
> + reg = GPIO0P0CTLI;
> + else
> + reg = GPIO1P0CTLI;
> + } else {
> + if (gpio < 8)
> + reg = GPIO0P0CTLO;
> + else
> + reg = GPIO1P0CTLO;
> + }
> +
> + return reg + gpio % 8;
> +}
> +
> +static void crystalcove_update_irq_mask(struct crystalcove_gpio *cg,
> + int gpio)
> +{
> + u8 mirqs0 = gpio < 8 ? MGPIO0IRQS0 : MGPIO1IRQS0;
> + int mask = BIT(gpio % 8);
> +
> + if (cg->set_irq_mask)
> + regmap_update_bits(cg->regmap, mirqs0, mask, mask);
> + else
> + regmap_update_bits(cg->regmap, mirqs0, mask, 0);
> +}
> +
> +static void crystalcove_update_irq_ctrl(struct crystalcove_gpio *cg, int gpio)
> +{
> + int reg = to_reg(gpio, CTRL_IN);
> +
> + regmap_update_bits(cg->regmap, reg, CTLI_INTCNT_BE, cg->intcnt_value);
> +}
> +
> +static int crystalcove_gpio_dir_in(struct gpio_chip *chip, unsigned gpio)
> +{
> + struct crystalcove_gpio *cg = to_cg(chip);
> +
> + return regmap_write(cg->regmap, to_reg(gpio, CTRL_OUT),
> + CTLO_INPUT_SET);
> +}
> +
> +static int crystalcove_gpio_dir_out(struct gpio_chip *chip, unsigned gpio,
> + int value)
> +{
> + struct crystalcove_gpio *cg = to_cg(chip);
> +
> + return regmap_write(cg->regmap, to_reg(gpio, CTRL_OUT),
> + CTLO_OUTPUT_SET | value);
> +}
> +
> +static int crystalcove_gpio_get(struct gpio_chip *chip, unsigned gpio)
> +{
> + struct crystalcove_gpio *cg = to_cg(chip);
> + int ret;
> + unsigned int val;
> +
> + ret = regmap_read(cg->regmap, to_reg(gpio, CTRL_IN), &val);
> + if (ret)
> + return ret;
> +
> + return val & 0x1;
> +}
> +
> +static void crystalcove_gpio_set(struct gpio_chip *chip,
> + unsigned gpio, int value)
> +{
> + struct crystalcove_gpio *cg = to_cg(chip);
> +
> + if (value)
> + regmap_update_bits(cg->regmap, to_reg(gpio, CTRL_OUT), 1, 1);
> + else
> + regmap_update_bits(cg->regmap, to_reg(gpio, CTRL_OUT), 1, 0);
> +}
> +
> +static int crystalcove_irq_type(struct irq_data *data, unsigned type)
> +{
> + struct crystalcove_gpio *cg = to_cg(irq_data_get_irq_chip_data(data));
> +
> + switch (type) {
> + case IRQ_TYPE_NONE:
> + cg->intcnt_value = CTLI_INTCNT_DIS;
> + break;
> + case IRQ_TYPE_EDGE_BOTH:
> + cg->intcnt_value = CTLI_INTCNT_BE;
> + break;
> + case IRQ_TYPE_EDGE_RISING:
> + cg->intcnt_value = CTLI_INTCNT_PE;
> + break;
> + case IRQ_TYPE_EDGE_FALLING:
> + cg->intcnt_value = CTLI_INTCNT_NE;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + cg->update |= UPDATE_IRQ_TYPE;
> +
> + return 0;
> +}
> +
> +static void crystalcove_bus_lock(struct irq_data *data)
> +{
> + struct crystalcove_gpio *cg = to_cg(irq_data_get_irq_chip_data(data));
> +
> + mutex_lock(&cg->buslock);
> +}
> +
> +static void crystalcove_bus_sync_unlock(struct irq_data *data)
> +{
> + struct crystalcove_gpio *cg = to_cg(irq_data_get_irq_chip_data(data));
> + int gpio = data->hwirq;
> +
> + if (cg->update & UPDATE_IRQ_TYPE)
> + crystalcove_update_irq_ctrl(cg, gpio);
> + if (cg->update & UPDATE_IRQ_MASK)
> + crystalcove_update_irq_mask(cg, gpio);
> + cg->update = 0;
> +
> + mutex_unlock(&cg->buslock);
> +}
> +
> +static void crystalcove_irq_unmask(struct irq_data *data)
> +{
> + struct crystalcove_gpio *cg = to_cg(irq_data_get_irq_chip_data(data));
> +
> + cg->set_irq_mask = false;
> + cg->update |= UPDATE_IRQ_MASK;
> +}
> +
> +static void crystalcove_irq_mask(struct irq_data *data)
> +{
> + struct crystalcove_gpio *cg = to_cg(irq_data_get_irq_chip_data(data));
> +
> + cg->set_irq_mask = true;
> + cg->update |= UPDATE_IRQ_MASK;
> +}
> +
> +static struct irq_chip crystalcove_irqchip = {
> + .name = "Crystal Cove",
> + .irq_mask = crystalcove_irq_mask,
> + .irq_unmask = crystalcove_irq_unmask,
> + .irq_set_type = crystalcove_irq_type,
> + .irq_bus_lock = crystalcove_bus_lock,
> + .irq_bus_sync_unlock = crystalcove_bus_sync_unlock,
> +};
> +
> +static irqreturn_t crystalcove_gpio_irq_handler(int irq, void *data)
> +{
> + struct crystalcove_gpio *cg = data;
> + unsigned int p0, p1;
> + int pending;
> + int gpio;
> + unsigned int virq;
> +
> + if (regmap_read(cg->regmap, GPIO0IRQ, &p0) ||
> + regmap_read(cg->regmap, GPIO1IRQ, &p1))
> + return IRQ_NONE;
> +
> + regmap_write(cg->regmap, GPIO0IRQ, p0);
> + regmap_write(cg->regmap, GPIO1IRQ, p1);
> +
> + pending = p0 | p1 << 8;
> +
> + for (gpio = 0; gpio < cg->chip.ngpio; gpio++) {
> + if (pending & BIT(gpio)) {
> + virq = irq_find_mapping(cg->chip.irqdomain, gpio);
> + generic_handle_irq(virq);
> + }
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void crystalcove_gpio_dbg_show(struct seq_file *s,
> + struct gpio_chip *chip)
> +{
> + struct crystalcove_gpio *cg = to_cg(chip);
> + int gpio, offset;
> + unsigned int ctlo, ctli, mirqs0, mirqsx, irq;
> +
> + for (gpio = 0; gpio < cg->chip.ngpio; gpio++) {
> + regmap_read(cg->regmap, to_reg(gpio, CTRL_OUT), &ctlo);
> + regmap_read(cg->regmap, to_reg(gpio, CTRL_IN), &ctli);
> + regmap_read(cg->regmap, gpio < 8 ? MGPIO0IRQS0 : MGPIO1IRQS0,
> + &mirqs0);
> + regmap_read(cg->regmap, gpio < 8 ? MGPIO0IRQSX : MGPIO1IRQSX,
> + &mirqsx);
> + regmap_read(cg->regmap, gpio < 8 ? GPIO0IRQ : GPIO1IRQ,
> + &irq);
> +
> + offset = gpio % 8;
> + seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s %s\n",
> + gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ",
> + ctli & 0x1 ? "hi" : "lo",
> + ctli & CTLI_INTCNT_NE ? "fall" : " ",
> + ctli & CTLI_INTCNT_PE ? "rise" : " ",
> + ctlo,
> + mirqs0 & BIT(offset) ? "s0 mask " : "s0 unmask",
> + mirqsx & BIT(offset) ? "sx mask " : "sx unmask",
> + irq & BIT(offset) ? "pending" : " ");
> + }
> +}
> +
> +static int crystalcove_gpio_probe(struct platform_device *pdev)
> +{
> + int irq = platform_get_irq(pdev, 0);
> + struct crystalcove_gpio *cg;
> + int retval;
> + struct device *dev = pdev->dev.parent;
> + struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
> +
> + if (irq < 0)
> + return irq;
> +
> + cg = devm_kzalloc(&pdev->dev, sizeof(*cg), GFP_KERNEL);
> + if (!cg)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, cg);
> +
> + mutex_init(&cg->buslock);
> + cg->chip.label = KBUILD_MODNAME;
> + cg->chip.direction_input = crystalcove_gpio_dir_in;
> + cg->chip.direction_output = crystalcove_gpio_dir_out;
> + cg->chip.get = crystalcove_gpio_get;
> + cg->chip.set = crystalcove_gpio_set;
> + cg->chip.base = -1;
> + cg->chip.ngpio = CRYSTALCOVE_GPIO_NUM;
> + cg->chip.can_sleep = true;
> + cg->chip.dev = dev;
> + cg->chip.dbg_show = crystalcove_gpio_dbg_show;
> + cg->regmap = pmic->regmap;
> +
> + retval = gpiochip_add(&cg->chip);
> + if (retval) {
> + dev_warn(&pdev->dev, "add gpio chip error: %d\n", retval);
> + return retval;
> + }
> +
> + gpiochip_irqchip_add(&cg->chip, &crystalcove_irqchip, 0,
> + handle_simple_irq, IRQ_TYPE_NONE);
> +
> + retval = request_threaded_irq(irq, NULL, crystalcove_gpio_irq_handler,
> + IRQF_ONESHOT, KBUILD_MODNAME, cg);
> +
> + if (retval) {
> + dev_warn(&pdev->dev, "request irq failed: %d\n", retval);
> + goto out_remove_gpio;
> + }
> +
> + return 0;
> +
> +out_remove_gpio:
> + WARN_ON(gpiochip_remove(&cg->chip));
> + return retval;
> +}
> +
> +static int crystalcove_gpio_remove(struct platform_device *pdev)
> +{
> + struct crystalcove_gpio *cg = platform_get_drvdata(pdev);
> + int irq = platform_get_irq(pdev, 0);
> + int err;
> +
> + err = gpiochip_remove(&cg->chip);
> +
> + if (irq >= 0)
> + free_irq(irq, cg);
> +
> + return err;
> +}
> +
> +static struct platform_driver crystalcove_gpio_driver = {
> + .probe = crystalcove_gpio_probe,
> + .remove = crystalcove_gpio_remove,
> + .driver = {
> + .name = "crystal_cove_gpio",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +module_platform_driver(crystalcove_gpio_driver);
> +
> +MODULE_AUTHOR("Yang, Bin <bin.yang@xxxxxxxxx>");
> +MODULE_DESCRIPTION("Intel Crystal Cove GPIO Driver");
> +MODULE_LICENSE("GPL v2");

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Lee Jones: "[GIT PULL] LinusW - Immutable branch between MFD and GPIO"
Previous message: Nicholas Krause: "[PATCHv2] Check if skb_alloc returns Null in function fw_download_code"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]