Re: [PATCH v2 0/8] Add Keystone PCIe controller driver

[Jingoo Han]

On Wednesday, June 18, 2014 9:09 AM, Bjorn Helgaas wrote:
> 
> On Tue, Jun 10, 2014 at 02:51:19PM -0400, Murali Karicheri wrote:
> > This patch adds a PCIe controller driver for Keystone SoCs. This
> > is based on v1 of the series posted to the mailing list.
> >
> > CC: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
> > CC: Russell King <linux@xxxxxxxxxxxxxxxx>
> > CC: Grant Likely <grant.likely@xxxxxxxxxx>
> > CC: Rob Herring <robh+dt@xxxxxxxxxx>
> > CC: Mohit Kumar <mohit.kumar@xxxxxx>
> > CC: Jingoo Han <jg1.han@xxxxxxxxxxx>
> > CC: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> > CC: Pratyush Anand <pratyush.anand@xxxxxx>
> > CC: Richard Zhu <r65037@xxxxxxxxxxxxx>
> > CC: Kishon Vijay Abraham I <kishon@xxxxxx>
> > CC: Marek Vasut <marex@xxxxxxx>
> > CC: Arnd Bergmann <arnd@xxxxxxxx>
> > CC: Pawel Moll <pawel.moll@xxxxxxx>
> > CC: Mark Rutland <mark.rutland@xxxxxxx>
> > CC: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
> > CC: Kumar Gala <galak@xxxxxxxxxxxxxx>
> > CC: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
> > CC: Grant Likely <grant.likely@xxxxxxxxxx>
> >
> >
> > Changelog:
> >
> > V2
> >  - Split the designware pcie enhancement patch to multiple
> >    patches based on functionality added
> >  - Remove the quirk code and add a patch to fix mps/mrss
> >    tuning for ARM. Use kernel command line parameter
> >    pci=pcie_bus_perf to work with Keystone PCI Controller.
> >    Following patch addressed this.
> >      [PATCH v1] ARM: pci: add call to pcie_bus_configure_settings()
> >  - Add documentation for device tree bindings
> >  - Add separate interrupt controller nodes for MSI and Legacy
> >    IRQs and use irq map for legacy IRQ
> >  - Use compatibility to identify v3.65 version of the DW hardware
> >    and use it to customize the designware common code.
> >  - Use reg property for configuration space instead of range
> >  - Other minor updates based on code inspection.
> >
> > V1
> >  - Add an interrupt controller node for Legacy irq chip and use
> >    interrupt map/map-mask property to map legacy IRQs A/B/C/D
> >  - Add a Phy driver to replace the original serdes driver
> >  - Move common application register handling code to a separate
> >    file to allow re-use across other platforms that use older
> >    DW PCIe h/w
> >  - PCI quirk for maximum read request size. Check and override only
> >    if the maximum is higher than what controller can handle.
> >  - Converted to a module platform driver.
> >
> >
> > Murali Karicheri (8):
> >   PCI: designware: add rd[wr]_other_conf API
> >   PCI: designware: refactor host init code to re-use on v3.65 DW pci hw
> >   PCI: designware: update pcie core driver to work with dw hw version
> >     3.65
> >   PCI: designware: add msi controller functions for v3.65 hw
> >   PCI: designware: add PCI controller functions for v3.65 DW hw
> >   phy: Add serdes phy driver for keystone
> >   PCI: keystone: add pcie driver based on designware core driver
> >   ARM: keystone: add pcie related options
> >
> >  .../devicetree/bindings/pci/designware-pcie.txt    |   42 ++
> >  .../devicetree/bindings/pci/pci-keystone.txt       |   56 +++
> >  .../bindings/phy/phy-keystone-serdes.txt           |   25 ++
> >  arch/arm/mach-keystone/Kconfig                     |    1 +
> >  drivers/pci/host/Kconfig                           |   12 +
> >  drivers/pci/host/Makefile                          |    2 +
> >  drivers/pci/host/pci-dw-v3_65-msi.c                |  149 +++++++
> >  drivers/pci/host/pci-dw-v3_65.c                    |  390 ++++++++++++++++++
> >  drivers/pci/host/pci-dw-v3_65.h                    |   34 ++
> >  drivers/pci/host/pci-keystone.c                    |  418 ++++++++++++++++++++
> >  drivers/pci/host/pcie-designware.c                 |  175 +++++---
> >  drivers/pci/host/pcie-designware.h                 |   42 +-
> >  drivers/phy/Kconfig                                |    6 +
> >  drivers/phy/Makefile                               |    1 +
> >  drivers/phy/phy-keystone-serdes.c                  |  230 +++++++++++
> >  15 files changed, 1531 insertions(+), 52 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/pci/pci-keystone.txt
> >  create mode 100644 Documentation/devicetree/bindings/phy/phy-keystone-serdes.txt
> >  create mode 100644 drivers/pci/host/pci-dw-v3_65-msi.c
> >  create mode 100644 drivers/pci/host/pci-dw-v3_65.c
> >  create mode 100644 drivers/pci/host/pci-dw-v3_65.h
> >  create mode 100644 drivers/pci/host/pci-keystone.c
> >  create mode 100644 drivers/phy/phy-keystone-serdes.c
> 
> I'm not willing to merge phy-keystone-serdes.c because I don't
> maintain drivers/phy and because of the binary blob of register values
> it contains, but maybe somebody else will.  I assume it could be
> merged by itself before the rest of this.

I think so, too.

DT maintainers and arch maintainers should review the following
dt bindings.
  .../devicetree/bindings/pci/designware-pcie.txt    |   42 ++
  .../devicetree/bindings/pci/pci-keystone.txt       |   56 +++

Generic PHY maintainer (Kishon Vijay Abraham I) should review the
following phy driver.
  drivers/phy/phy-keystone-serdes.c

> 
> I'm looking for acks from Mohit and/or Jingoo for the pci/host
> changes, and from Arnd for the devicetree/bindings changes.
> 
> Adding these "-dw-3_64" files is sort of ugly.  If that code is only
> used by keystone, maybe it could just be moved to pci-keystone.c?  But
> I'll defer to Mohit and Jingoo on that and the way you modify
> pcie-designware.c.

I agree with Bjorn Helgaas's opinion. These three "-dw-3_64" files
look terrible! I don't have a good way to handle this; however,
moving this code to pci-keystone.c looks better.

Best regards,
Jingoo Han

> 
> Bjorn

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/