Re: [PATCH 1/4] clk: propagate parent change up one level

From: Tomasz Stanislawski
Date: Wed Jun 18 2014 - 06:12:07 EST


Hi Mike,
Do you have any comments about this patch?
The patch is needed to provide a clean fix for recently
broken support for HDMI on Exynos4210 SoC in mainline.

Regards,
Tomasz Stanislawski


On 05/01/2014 12:19 AM, Tomasz Figa wrote:
> Mike,
>
> On 08.04.2014 17:45, Tomasz Figa wrote:
>> Hi,
>>
>> On 04.04.2014 16:53, Tomasz Stanislawski wrote:
>>> This patch adds support for propagation of setup of clock's parent one
>>> level
>>> up.
>>>
>>> This feature is helpful when a driver changes topology of its clocks
>>> using
>>> clk_set_parent(). The problem occurs when on one platform/SoC
>>> driver's clock
>>> is located at MUX output but on the other platform/SoC there is a
>>> gated proxy
>>> clock between the MUX and driver's clock. In such a case, driver's
>>> code has to
>>> be modified to use one clock for enabling and the other clock for
>>> setup of a
>>> parent.
>>>
>>> The code updates are avoided by propagating setup of a parent up one
>>> level.
>>>
>>> Additionally, this patch adds CLK_SET_PARENT_PARENT (sorry for naming)
>>> flag to
>>> inform clk-core that clk_set_parent() should be propagated.
>>>
>>> Signed-off-by: Tomasz Stanislawski <t.stanislaws@xxxxxxxxxxx>
>>> ---
>>> drivers/clk/clk.c | 6 ++++++
>>> include/linux/clk-provider.h | 1 +
>>> 2 files changed, 7 insertions(+)
>>>
>>> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
>>> index dff0373..53bbfda 100644
>>> --- a/drivers/clk/clk.c
>>> +++ b/drivers/clk/clk.c
>>> @@ -1737,6 +1737,12 @@ int clk_set_parent(struct clk *clk, struct clk
>>> *parent)
>>>
>>> /* try finding the new parent index */
>>> if (parent) {
>>> + if ((clk->flags & CLK_SET_PARENT_PARENT)
>>> + && clk->num_parents == 1) {
>>> + ret = clk_set_parent(clk->parent, parent);
>>> + goto out;
>>> + }
>>> +
>>> p_index = clk_fetch_parent_index(clk, parent);
>>> p_rate = parent->rate;
>>> if (p_index < 0) {
>>> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
>>> index 5119174..daa0b03 100644
>>> --- a/include/linux/clk-provider.h
>>> +++ b/include/linux/clk-provider.h
>>> @@ -30,6 +30,7 @@
>>> #define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk
>>> rate */
>>> #define CLK_SET_RATE_NO_REPARENT BIT(7) /* don't re-parent on rate
>>> change */
>>> #define CLK_GET_ACCURACY_NOCACHE BIT(8) /* do not use the cached clk
>>> accuracy */
>>> +#define CLK_SET_PARENT_PARENT BIT(9) /* propagate parent change up
>>> one level */
>>>
>>> struct clk_hw;
>>> struct dentry;
>>>
>>
>> This would be very useful, at least on Exynos platforms, with
>> mux-div-gate clock paths. PARENT_PARENT sounds a bit funny, though.
>>
>> Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
>
> Your opinion on this would be greatly appreciated.
>
> Best regards,
> Tomasz

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/