[PATCH v2 3/7] ARM: stih416: Add DT nodes for PWM
From: Lee Jones
Date: Wed Jun 18 2014 - 11:28:39 EST
ARM: stih416: Add DT nodes for PWM
Supply top level nodes for the STiH416 based development boards.
The Pinctrl configuration has already been applied, so the only
missing piece of the DT puzzle is for a board's DTB to enable
the nodes.
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 06473c5..f95e469 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -102,7 +102,7 @@
interrupts = <0 210 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_serial1>;
- clocks = <&clk_sysin>;
+ clocks = <&clk_sysin>;
};
i2c@fed40000 {
@@ -236,5 +236,45 @@
resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>,
<&softreset STIH416_KEYSCAN_SOFTRESET>;
};
+
+ /* SAS PWM Module */
+ pwm0: pwm@fed10000 {
+ compatible = "st,sti-pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ reg = <0xfed10000 0x68>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_chan0_default
+ &pinctrl_pwm0_chan1_default
+ &pinctrl_pwm0_chan2_default
+ &pinctrl_pwm0_chan3_default>;
+
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ };
+
+ /* SBC PWM Module */
+ pwm1: pwm@fe510000 {
+ compatible = "st,sti-pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ reg = <0xfe510000 0x68>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1_chan0_default
+ /*
+ * Shared with SBC_OBS_NOTRST. Don't
+ * enable unless you really know what
+ * you're doing.
+ *
+ * &pinctrl_pwm1_chan1_default
+ */
+ &pinctrl_pwm1_chan2_default
+ &pinctrl_pwm1_chan3_default>;
+
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ };
};
};
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/