[PATCH] regulator: bcm590xx: fix vbus name

[Graham Williams]

The vbus regulator was not getting its name set. This results
in the sysfs entry being empty. The lack of a bcm590xx_regs[]
table entry also upsets Coverity runs. Add the table entry
so the name gets set properly.

Signed-off-by: Graham Williams <graham.williams@xxxxxxxxxx>
---
 drivers/regulator/bcm590xx-regulator.c |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/regulator/bcm590xx-regulator.c b/drivers/regulator/bcm590xx-regulator.c
index 57544e2..58ece59 100644
--- a/drivers/regulator/bcm590xx-regulator.c
+++ b/drivers/regulator/bcm590xx-regulator.c
@@ -119,6 +119,10 @@ static const unsigned int ldo_c_table[] = {
 	2900000, 3000000, 3300000,
 };
 
+static const unsigned int ldo_vbus[] = {
+	5000000,
+};
+
 /* DCDC group CSR: supported voltages in microvolts */
 static const struct regulator_linear_range dcdc_csr_ranges[] = {
 	REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000),
@@ -192,6 +196,7 @@ static struct bcm590xx_info bcm590xx_regs[] = {
 	BCM590XX_REG_TABLE(gpldo4, ldo_a_table),
 	BCM590XX_REG_TABLE(gpldo5, ldo_a_table),
 	BCM590XX_REG_TABLE(gpldo6, ldo_a_table),
+	BCM590XX_REG_TABLE(vbus, ldo_vbus),
 };
 
 struct bcm590xx_reg {
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/