[PATCH v3 2/3] clocksource: exynos_mct: __raw_readl/__raw_writel => readl_relaxed/writel_relaxed
From: Doug Anderson
Date: Fri Jun 20 2014 - 13:48:45 EST
Using the __raw functions is discouraged. Update the file to
consistently use the proper functions.
Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
---
Changes in v3:
- __raw_readl / __raw_writel patch new for version 3
drivers/clocksource/exynos_mct.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index ab51bf20a..2df03e2 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -94,7 +94,7 @@ static void exynos4_mct_write(unsigned int value, unsigned long offset)
u32 mask;
u32 i;
- __raw_writel(value, reg_base + offset);
+ writel_relaxed(value, reg_base + offset);
if (likely(offset >= EXYNOS4_MCT_L_BASE(0))) {
stat_addr = (offset & ~EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET;
@@ -144,8 +144,8 @@ static void exynos4_mct_write(unsigned int value, unsigned long offset)
/* Wait maximum 1 ms until written values are applied */
for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++)
- if (__raw_readl(reg_base + stat_addr) & mask) {
- __raw_writel(mask, reg_base + stat_addr);
+ if (readl_relaxed(reg_base + stat_addr) & mask) {
+ writel_relaxed(mask, reg_base + stat_addr);
return;
}
@@ -157,7 +157,7 @@ static void exynos4_mct_frc_start(void)
{
u32 reg;
- reg = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
+ reg = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON);
reg |= MCT_G_TCON_START;
exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON);
}
@@ -165,12 +165,12 @@ static void exynos4_mct_frc_start(void)
static cycle_t notrace _exynos4_frc_read(void)
{
unsigned int lo, hi;
- u32 hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U);
+ u32 hi2 = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_U);
do {
hi = hi2;
- lo = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_L);
- hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U);
+ lo = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_L);
+ hi2 = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_U);
} while (hi != hi2);
return ((cycle_t)hi << 32) | lo;
@@ -225,7 +225,7 @@ static void exynos4_mct_comp0_stop(void)
{
unsigned int tcon;
- tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
+ tcon = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON);
tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC);
exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON);
@@ -238,7 +238,7 @@ static void exynos4_mct_comp0_start(enum clock_event_mode mode,
unsigned int tcon;
cycle_t comp_cycle;
- tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
+ tcon = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON);
if (mode == CLOCK_EVT_MODE_PERIODIC) {
tcon |= MCT_G_TCON_COMP0_AUTO_INC;
@@ -327,7 +327,7 @@ static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START;
unsigned long offset = mevt->base + MCT_L_TCON_OFFSET;
- tmp = __raw_readl(reg_base + offset);
+ tmp = readl_relaxed(reg_base + offset);
if (tmp & mask) {
tmp &= ~mask;
exynos4_mct_write(tmp, offset);
@@ -349,7 +349,7 @@ static void exynos4_mct_tick_start(unsigned long cycles,
/* enable MCT tick interrupt */
exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);
- tmp = __raw_readl(reg_base + mevt->base + MCT_L_TCON_OFFSET);
+ tmp = readl_relaxed(reg_base + mevt->base + MCT_L_TCON_OFFSET);
tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START |
MCT_L_TCON_INTERVAL_MODE;
exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET);
@@ -401,7 +401,7 @@ static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
exynos4_mct_tick_stop(mevt);
/* Clear the MCT tick interrupt */
- if (__raw_readl(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
+ if (readl_relaxed(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
return 1;
} else {
--
2.0.0.526.g5318336
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/