Re: [PATCH] dt/documentation: add specification of dma bus information
From: Rob Herring
Date: Fri Jun 20 2014 - 15:46:46 EST
On Fri, Jun 20, 2014 at 2:02 PM, Santosh Shilimkar
<santosh.shilimkar@xxxxxx> wrote:
> On Friday 20 June 2014 02:56 PM, Arnd Bergmann wrote:
>> On Friday 20 June 2014 13:17:43 Santosh Shilimkar wrote:
>>>>> + dma-coherent;
>>>>> + dma-ranges;
>>>>> +
>>>>> + dwc3@2690000 {
>>>>> + compatible = "synopsys,dwc3";
>>>>> + [...]
>>>>> + };
>>>>
>>>> This example is a bit strange. I don't understand the relationship
>>>> between keystone-dwc3 and synopsys,dwc3, nor do I want to. I'd prefer
>>>> to see a simple example here.
>>
>>
>>>> dma-ranges is a property of the parent which you show, but
>>>> dma-coherent originally was a property of the bus master itself. While
>>>> we need to support that, are we changing that? We need to be clear on
>>>> where the property belongs even if the kernel is more lax.
>>>>
>>> I don't think we are changing it fundamentally but may be I missing
>>> your point. The dma-coherent as is now a per-device property.
>>> USB is one of the bus master supports coherency and hence showed
>>> up in above example.
>>
>> I think it's enough if you just drop the "synopsys,dwc3" node and the
>> intermediate dma-ranges property from the example, leaving the
>> dma-coherent property in the "ti,keystone-dwc3" node.
>>
> Thanks Arnd. That should avoid the confusion. Just to see if Rob is
> fine by it, the example will look like below.
Yes. Looks fine.
Rob
>
> Example:
> soc {
> compatible = "ti,keystone","simple-bus";
> ranges = <0x0 0x0 0x0 0xc0000000>;
> dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
>
> [...]
>
> usb: usb@2680000 {
> compatible = "ti,keystone-dwc3";
>
> [...]
> dma-coherent;
> };
> };
>
> Regards,
> Santosh
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/