RE: [PATCH] phy: phy-samsung-usb2: Change phy power on/power off sequence
From: Kamil Debski
Date: Tue Jun 24 2014 - 11:35:29 EST
Hi Daniel,
> From: Daniel Drake [mailto:drake@xxxxxxxxxxxx]
> Sent: Tuesday, June 24, 2014 5:09 PM
>
> On Tue, Jun 24, 2014 at 1:54 PM, Kamil Debski <k.debski@xxxxxxxxxxx>
> wrote:
> > The Exynos4412 USB 2.0 PHY hardware differs from the description
> > provided in the documentation. Some register bits have different
> > function. This patch fixes the defines of register bits and changes
> > the way how phys are powered on and off.
>
> I guess this replaces the patch titled "drivers: phy: exynos4x12-phy:
> fix HSIC1 power on/off sequence"
Yes, indeed it replaces this patch. I did some more research on how the
hardware actually behaves.
>
> Tested on ODROID-U2. Seems to be working as well as the previous patch:
Thank you very much for testing.
> - Internal SMSC hub works on boot and after reboot, tested with USB
> mouse
> - Internal SMSC ethernet device works on boot, but disappears upon
> reboot. (same as previous patch, also reproduced by Marek)
By reboot I guess that you mean typing "reboot" or by using SysRq magic
and not power cycling?
If so, I had experienced the same symptoms. I guess that the Ethernet
chip is not reset properly and fails to enumerate without power cycling
(it's nRESET pin is connected to P3V3).
I found that removing regulator-always-on from buck8_reg: BUCK8 in the
dts file fixes this problem.
Best wishes,
--
Kamil Debski
Samsung R&D Institute Poland
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/