[regulator] BUG: kernel early hang without any printk output

From: Fengguang Wu
Date: Wed Jun 25 2014 - 05:18:20 EST


Hi Mark,

It seems this merge commit makes the kernel not 100% bootable.
5 out of 53 boots block w/o any dmesg output.

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
commit a920677c35627d1baac9776dfba0286e7a1e1f0f
Merge: 3b9f3f3 ce44beb 03187c7 c969faa 53ddddc
Author: Mark Brown <broonie@xxxxxxxxxx>
AuthorDate: Sun Jun 22 11:58:45 2014 +0100

Merge remote-tracking branches 'regulator/topic/88pm800', 'regulator/topic/ab8500', 'regulator/topic/bcm590xx' and 'regulator/topic/ltc3589' into regulator-next

Attached dmesg for the parent commit, too, to help confirm whether it is a noise error.

+------------------------------------------------------------+------------+------------+------------+------------+------------+------------+------------------+
| | 3b9f3f33ad | ce44beb7c0 | 03187c72db | c969faadf0 | 53ddddcad5 | a920677c35 | v3.16-rc2_062302 |
+------------------------------------------------------------+------------+------------+------------+------------+------------+------------+------------------+
| boot_successes | 0 | 306 | 0 | 391 | 0 | 0 | 0 |
| boot_failures | 408 | 0 | 306 | 17 | 408 | 102 | 53 |
| genirq:Flags_mismatch_irq.(serial)vs.(goldfish_pdev_bus) | 408 | 0 | 306 | 0 | 408 | 96 | 48 |
| WARNING:CPU:PID:at_kernel/events/core.c:perf_swevent_add() | 0 | 0 | 0 | 16 | | | |
| WARNING:CPU:PID:at_mm/slab_common.c:kmalloc_slab() | 0 | 0 | 0 | 1 | | | |
| backtrace:netlink_setsockopt | 0 | 0 | 0 | 1 | | | |
| backtrace:SyS_setsockopt | 0 | 0 | 0 | 1 | | | |
| backtrace:SyS_socketcall | 0 | 0 | 0 | 1 | | | |
| BUG:kernel_early_hang_without_any_printk_output | 0 | 0 | 0 | 0 | 0 | 6 | 5 |
+------------------------------------------------------------+------------+------------+------------+------------+------------+------------+------------------+

BUG: kernel early hang without any printk output
Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-c1-06230242/linux-devel:devel-hourly-2014062302:a920677c35627d1baac9776dfba0286e7a1e1f0f:bisect-linux4/.vmlinuz-a920677c35627d1baac9776dfba0286e7a1e1f0f-20140623053514-40-ivb42 branch=linux-devel/devel-hourly-2014062302 BOOT_IMAGE=/kernel/i386-randconfig-c1-06230242/a920677c35627d1baac9776dfba0286e7a1e1f0f/vmlinuz-3.16.0-rc1-00017-ga920677 drbd.minor_count=8
Early hang kernel: vmlinuz-3.16.0-rc1-00017-ga920677 3.16.0-rc1-00017-ga920677 #6
Elapsed time: 35

git bisect start 375e99ffd57ef530588f58288bc5fe39cf94cbae a497c3ba1d97fc69c1e78e7b96435ba8c2cb42ee --
git bisect good b3aa7a29807dac2dd7355ac97eb1462e97acf9e0 # 03:43 102+ 102 Merge 'rcu/dev.2014.06.19c' into devel-hourly-2014062302
git bisect bad 9e6424f1b56fc78818b92a5954fe8e37da497f32 # 04:05 0- 1 Merge 'regulator/for-next' into devel-hourly-2014062302
git bisect good e9ffadad61b2af6372be2e06802c0faeb5550250 # 04:26 102+ 102 Merge 'arm-jcooper/irqchip/urgent' into devel-hourly-2014062302
git bisect good 12318f8cc77eab9ca20188257664a2fc9f63a8a9 # 04:48 102+ 102 Merge 'arm-soc/for-next' into devel-hourly-2014062302
git bisect good 222980021ed94fe1201ad129ac7672cb7275ecec # 05:05 102+ 102 Merge 'spi/for-next' into devel-hourly-2014062302
git bisect good 3b9f3f33ad71b863673388f88cd2ba7df803e730 # 05:20 102+ 102 Merge remote-tracking branch 'regulator/topic/core' into regulator-next
git bisect bad a920677c35627d1baac9776dfba0286e7a1e1f0f # 05:48 0- 1 Merge remote-tracking branches 'regulator/topic/88pm800', 'regulator/topic/ab8500', 'regulator/topic/bcm590xx' and 'regulator/topic/ltc3589' into regulator-next
git bisect good c969faadf02076641a81197f2e8641c40d232edd # 06:07 102+ 3 regulator: bcm590xx: remove unnecessary OOM messages
git bisect good ce44beb7c0b12d33ce88b396aeaea0ba4ca1bbfc # 06:29 102+ 0 regulator: 88pm800: remove duplicate PM800_BUCK3 define
git bisect good 53ddddcad5a4fc41db3e2f16c22344d8da58cf74 # 06:44 102+ 102 regulator: ltc3589: Staticize ltc3589_reg_defaults
# first bad commit: [a920677c35627d1baac9776dfba0286e7a1e1f0f] Merge remote-tracking branches 'regulator/topic/88pm800', 'regulator/topic/ab8500', 'regulator/topic/bcm590xx' and 'regulator/topic/ltc3589' into regulator-next
git bisect good 3b9f3f33ad71b863673388f88cd2ba7df803e730 # 06:52 306+ 408 Merge remote-tracking branch 'regulator/topic/core' into regulator-next
git bisect good ce44beb7c0b12d33ce88b396aeaea0ba4ca1bbfc # 06:57 306+ 0 regulator: 88pm800: remove duplicate PM800_BUCK3 define
git bisect good 03187c72db60e20354aca6802bc5cc3e42c1d6e1 # 07:10 306+ 306 regulator: ab8500: Remove ab8500_regulator_debug_init/exit()
git bisect good c969faadf02076641a81197f2e8641c40d232edd # 07:16 306+ 17 regulator: bcm590xx: remove unnecessary OOM messages
git bisect good 53ddddcad5a4fc41db3e2f16c22344d8da58cf74 # 07:23 306+ 408 regulator: ltc3589: Staticize ltc3589_reg_defaults
git bisect bad 375e99ffd57ef530588f58288bc5fe39cf94cbae # 07:23 0- 53 0day head guard for 'devel-hourly-2014062302'
git bisect good a497c3ba1d97fc69c1e78e7b96435ba8c2cb42ee # 07:41 306+ 408 Linux 3.16-rc2
git bisect good 633594bb2d3890711a887897f2003f41735f0dfa # 08:08 306+ 306 Add linux-next specific files for 20140620


This script may reproduce the error.

-----------------------------------------------------------------------------
#!/bin/bash

kernel=$1

kvm=(
qemu-system-x86_64 -cpu kvm64 -enable-kvm
-kernel $kernel
-smp 2
-m 256M
-net nic,vlan=0,macaddr=00:00:00:00:00:00,model=virtio
-net user,vlan=0
-net nic,vlan=1,model=e1000
-net user,vlan=1
-boot order=nc
-no-reboot
-watchdog i6300esb
-serial stdio
-display none
-monitor null
)

append=(
debug
sched_debug
apic=debug
ignore_loglevel
sysrq_always_enabled
panic=10
prompt_ramdisk=0
earlyprintk=ttyS0,115200
console=ttyS0,115200
console=tty0
vga=normal
root=/dev/ram0
rw
)

"${kvm[@]}" --append "${append[*]}"
-----------------------------------------------------------------------------

Thanks,
Fengguang
BUG: kernel early hang without any printk output
Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-c1-06230242/linux-devel:devel-hourly-2014062302:a920677c35627d1baac9776dfba0286e7a1e1f0f:bisect-linux4/.vmlinuz-a920677c35627d1baac9776dfba0286e7a1e1f0f-20140623053514-40-ivb42 branch=linux-devel/devel-hourly-2014062302 BOOT_IMAGE=/kernel/i386-randconfig-c1-06230242/a920677c35627d1baac9776dfba0286e7a1e1f0f/vmlinuz-3.16.0-rc1-00017-ga920677 drbd.minor_count=8
Early hang kernel: vmlinuz-3.16.0-rc1-00017-ga920677 3.16.0-rc1-00017-ga920677 #6
Elapsed time: 35
qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/i386-randconfig-c1-06230242/a920677c35627d1baac9776dfba0286e7a1e1f0f/vmlinuz-3.16.0-rc1-00017-ga920677 -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-c1-06230242/linux-devel:devel-hourly-2014062302:a920677c35627d1baac9776dfba0286e7a1e1f0f:bisect-linux4/.vmlinuz-a920677c35627d1baac9776dfba0286e7a1e1f0f-20140623053514-40-ivb42 branch=linux-devel/devel-hourly-2014062302 BOOT_IMAGE=/kernel/i386-randconfig-c1-06230242/a920677c35627d1baac9776dfba0286e7a1e1f0f/vmlinuz-3.16.0-rc1-00017-ga920677 drbd.minor_count=8' -initrd /kernel-tests/initrd/quantal-core-i386.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-quantal-ivb42-110 -serial file:/dev/shm/kboot/serial-quantal-ivb42-110 -daemonize -display none -monitor null
early console in setup code
[ 0.000000] Linux version 3.16.0-rc1-00011-g3b9f3f3 (kbuild@jaketown) (gcc version 4.8.2 (Debian 4.8.2-18) ) #5 Mon Jun 23 05:15:42 CST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x100000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000fdae0-0x000fdaef] mapped at [800fdae0]
[ 0.000000] mpc: fdaf0-fdbe4
[ 0.000000] initial memory mapped: [mem 0x00000000-0x037fffff]
[ 0.000000] Base memory trampoline at [8009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x12000000-0x123fffff]
[ 0.000000] [mem 0x12000000-0x123fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x10000000-0x11ffffff]
[ 0.000000] [mem 0x10000000-0x11ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x0fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x12400000-0x13ffdfff]
[ 0.000000] [mem 0x12400000-0x13bfffff] page 2M
[ 0.000000] [mem 0x13c00000-0x13ffdfff] page 4k
[ 0.000000] BRK [0x0326b000, 0x0326bfff] PGTABLE
[ 0.000000] cma: CMA: reserved 32 MiB at 10400000
[ 0.000000] RAMDISK: [mem 0x127ab000-0x13feffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000FD950 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x13FFE450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x13FFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x13FFE490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 0x13FFFF40 000040
[ 0.000000] ACPI: SSDT 0x13FFF7A0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0x13FFF680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x13FFF640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffc000 ( fee00000)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 319MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 13ffe000
[ 0.000000] low ram: 0 - 13ffe000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:13ffd001, primary cpu clock
[ 0.000000] BRK [0x0326c000, 0x0326cfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00001000-0x13ffdfff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x13ffdfff]
[ 0.000000] On node 0 totalpages: 81820
[ 0.000000] Normal zone: 640 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 81820 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffc000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored.
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] mapped IOAPIC to ffffb000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 23b65c0
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 81180
[ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-c1-06230242/linux-devel:devel-hourly-2014062302:3b9f3f33ad71b863673388f88cd2ba7df803e730:bisect-linux4/.vmlinuz-3b9f3f33ad71b863673388f88cd2ba7df803e730-20140623064406-102-ivb41 branch=linux-devel/devel-hourly-2014062302 BOOT_IMAGE=/kernel/i386-randconfig-c1-06230242/3b9f3f33ad71b863673388f88cd2ba7df803e730/vmlinuz-3.16.0-rc1-00011-g3b9f3f3 drbd.minor_count=8
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 231300K/327280K available (13531K kernel code, 3900K rwdata, 6468K rodata, 964K init, 10284K bss, 95980K reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff8d000 - 0xfffff000 ( 456 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0x947fe000 - 0xff7fe000 (1712 MB)
[ 0.000000] lowmem : 0x80000000 - 0x93ffe000 ( 319 MB)
[ 0.000000] .init : 0x82761000 - 0x82852000 ( 964 kB)
[ 0.000000] .data : 0x81d36f81 - 0x8275f200 (10400 kB)
[ 0.000000] .text : 0x81000000 - 0x81d36f81 (13531 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=80096000 soft=80080000
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000000] ... CHAINHASH_SIZE: 32768
[ 0.000000] memory used by lock dependency info: 4895 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2693.482 MHz processor
[ 0.020000] Calibrating delay loop (skipped) preset value.. 5386.96 BogoMIPS (lpj=26934820)
[ 0.020000] pid_max: default: 32768 minimum: 301
[ 0.020000] ACPI: Core revision 20140424
[ 0.020078] ACPI: All ACPI Tables successfully acquired
[ 0.020670] Security Framework initialized
[ 0.021082] Yama: becoming mindful.
[ 0.021428] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.022062] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.023456] mce: CPU supports 10 MCE banks
[ 0.023858] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.023858] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.023858] tlb_flushall_shift: 6
[ 0.025056] CPU: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01)
[ 0.028951] ftrace: allocating 24159 entries in 48 pages
[ 0.040314] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[ 0.050655]
[ 0.050655] **********************************************************
[ 0.051391] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.051976] ** **
[ 0.052533] ** trace_printk() being used. Allocating extra memory. **
[ 0.053095] ** **
[ 0.053683] ** This means that this is a DEBUG kernel and it is **
[ 0.054288] ** unsafe for produciton use. **
[ 0.054805] ** **
[ 0.055333] ** If you see this message and you are not debugging **
[ 0.055917] ** the kernel, report this immediately to your vendor! **
[ 0.056525] ** **
[ 0.057144] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.057695] **********************************************************
[ 0.062966] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.063418] Getting VERSION: 50014
[ 0.063702] Getting VERSION: 50014
[ 0.063988] Getting ID: 0
[ 0.064212] Getting ID: f000000
[ 0.064479] Getting LVT0: 8700
[ 0.064779] Getting LVT1: 8400
[ 0.065058] enabled ExtINT on CPU#0
[ 0.066217] ENABLING IO-APIC IRQs
[ 0.066498] init IO_APIC IRQs
[ 0.066776] apic 0 pin 0 not connected
[ 0.067120] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.067821] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.068518] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.069249] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.069896] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[ 0.070051] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.070810] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.071541] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.072186] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.072868] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[ 0.073643] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[ 0.074417] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.075089] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.075854] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.076552] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.077288] apic 0 pin 16 not connected
[ 0.077641] apic 0 pin 17 not connected
[ 0.077984] apic 0 pin 18 not connected
[ 0.078312] apic 0 pin 19 not connected
[ 0.078673] apic 0 pin 20 not connected
[ 0.079030] apic 0 pin 21 not connected
[ 0.080008] apic 0 pin 22 not connected
[ 0.080399] apic 0 pin 23 not connected
[ 0.080918] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081453] Using local APIC timer interrupts.
[ 0.081453] calibrating APIC timer ...
[ 0.090000] ... lapic delta = 6249897
[ 0.090000] ... PM-Timer delta = 357960
[ 0.090000] ... PM-Timer result ok
[ 0.090000] ..... delta 6249897
[ 0.090000] ..... mult: 268431032
[ 0.090000] ..... calibration result: 9999835
[ 0.090000] ..... CPU clock speed is 2693.5749 MHz.
[ 0.090000] ..... host bus clock speed is 999.9835 MHz.
[ 0.090000] devtmpfs: initialized
[ 0.090000] gcov: version magic: 0x3430382a
[ 0.090000] atomic64_test: passed for i386+ platform with CX8 and with SSE
[ 0.090935] regulator-dummy: no parameters
[ 0.092497] RTC time: 6:47:40, date: 06/23/14
[ 0.093488] NET: Registered protocol family 16
[ 0.095452] cpuidle: using governor ladder
[ 0.096546] ACPI: bus type PCI registered
[ 0.097305] PCI: PCI BIOS revision 2.10 entry at 0xfc6d5, last bus=0
[ 0.098084] PCI: Using configuration type 1 for base access
[ 0.117786] gpio-f7188x: Not a Fintek device at 0x0000002e
[ 0.118543] gpio-f7188x: Not a Fintek device at 0x0000004e
[ 0.119902] ACPI: Added _OSI(Module Device)
[ 0.120014] ACPI: Added _OSI(Processor Device)
[ 0.120562] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.121044] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.134686] ACPI: Interpreter enabled
[ 0.135190] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.136336] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.137559] ACPI: (supports S0 S3 S4 S5)
[ 0.138055] ACPI: Using IOAPIC for interrupt routing
[ 0.138819] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.165464] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.166166] acpi PNP0A03:00: _OSC: OS supports [Segments]
[ 0.166776] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.168214] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.169913] PCI host bridge to bus 0000:00
[ 0.170014] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.170620] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.171246] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.171844] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.172697] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.173671] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.175794] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.178114] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.181963] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f]
[ 0.183641] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.184405] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.185169] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.185940] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.187574] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.188399] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.189023] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.190684] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 0.194769] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 0.196797] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff]
[ 0.203642] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[ 0.206412] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.208216] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff]
[ 0.210588] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f]
[ 0.215718] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.217311] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[ 0.218380] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[ 0.222780] pci_bus 0000:00: on NUMA node 0
[ 0.225163] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.226260] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.227262] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.228340] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.229158] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.231234] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 0.234229] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.235129] vgaarb: loaded
[ 0.235413] vgaarb: bridge control possible 0000:00:02.0
[ 0.238299] SCSI subsystem initialized
[ 0.238884] libata version 3.00 loaded.
[ 0.239721] ACPI: bus type USB registered
[ 0.240338] usbcore: registered new interface driver usbfs
[ 0.241047] usbcore: registered new interface driver hub
[ 0.241843] usbcore: registered new device driver usb
[ 0.242910] pps_core: LinuxPPS API ver. 1 registered
[ 0.243481] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.244408] PTP clock support registered
[ 0.245029] EDAC MC: Ver: 3.0.0
[ 0.246661] PCI: Using ACPI for IRQ routing
[ 0.247102] PCI: pci_cache_line_size set to 64 bytes
[ 0.247728] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.248396] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff]
[ 0.250937] Switched to clocksource kvm-clock
[ 0.252271] Warning: could not register all branches stats
[ 0.252843] Warning: could not register annotated branches stats
[ 0.335631] FS-Cache: Loaded
[ 0.336227] pnp: PnP ACPI init
[ 0.336730] ACPI: bus type PNP registered
[ 0.337317] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.338445] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.339140] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.340274] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.340932] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.342065] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.342813] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.343599] pnp 00:03: [dma 2]
[ 0.344162] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.344969] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.345991] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.346748] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.347816] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.348563] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.349642] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.351237] pnp: PnP ACPI: found 7 devices
[ 0.351639] ACPI: bus type PNP unregistered
[ 0.390298] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.390869] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.391441] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.392027] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.392738] NET: Registered protocol family 1
[ 0.393185] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.393733] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.394320] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.394865] pci 0000:00:02.0: Boot video device
[ 0.395449] PCI: CLS 0 bytes, default 64
[ 0.397334] Unpacking initramfs...
[ 2.222825] Freeing initrd memory: 24852K (927ab000 - 93ff0000)
[ 2.224874] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1
[ 2.225766] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 2.229052] The force parameter has not been set to 1. The Iris poweroff handler will not be installed.
[ 2.232624] futex hash table entries: 256 (order: 1, 11264 bytes)
[ 2.233295] Initialise system trusted keyring
[ 2.233884] audit: initializing netlink subsys (disabled)
[ 2.234617] audit: type=2000 audit(1403477263.126:1): initialized
[ 2.520156] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.521244] VFS: Disk quotas dquot_6.5.2
[ 2.521764] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.523543] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 2.523986] QNX4 filesystem 0.2.3 registered.
[ 2.524836] befs: version: 0.9.3
[ 2.525369] msgmni has been set to 564
[ 2.528586] Key type asymmetric registered
[ 2.529026] Asymmetric key parser 'x509' registered
[ 2.529622] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 2.530386] io scheduler noop registered (default)
[ 2.531002] io scheduler cfq registered
[ 2.531378] start plist test
[ 2.541010] end plist test
[ 2.541377] list_sort_test: start testing list_sort()
[ 2.543620] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32
[ 2.544120] crc32: self tests passed, processed 225944 bytes in 243001 nsec
[ 2.544991] crc32c: CRC_LE_BITS = 32
[ 2.545375] crc32c: self tests passed, processed 225944 bytes in 109435 nsec
[ 2.941284] crc32_combine: 8373 self tests passed
[ 3.220167] tsc: Refined TSC clocksource calibration: 2693.447 MHz
[ 3.333343] crc32c_combine: 8373 self tests passed
[ 3.335870] usbcore: registered new interface driver smscufx
[ 3.337230] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.337971] ACPI: Power Button [PWRF]
[ 3.474741] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.501101] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.506212] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[ 3.506950] platform pc8736x_gpio.0: no device found
[ 3.508202] nsc_gpio initializing
[ 3.508559] telclk_interrupt = 0xf non-mcpbl0010 hw.
[ 3.509076] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 3.509919] Hangcheck: Using getrawmonotonic().
[ 3.510536] [drm] Initialized drm 1.1.0 20060810
[ 3.511111] usbcore: registered new interface driver udl
[ 3.512317] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[ 3.513808] Uniform Multi-Platform E-IDE driver
[ 3.514377] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 3.521526] scsi: <fdomain> Detection failed (no card)
[ 3.572886] Failed initialization of WD-7000 SCSI card!
[ 3.573742] osst :I: Tape driver with OnStream support version 0.99.4
[ 3.573742] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 3.576456] HSI/SSI char device loaded
[ 3.579707] usbcore: registered new interface driver catc
[ 3.590258] usbcore: registered new interface driver kaweth
[ 3.591218] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 3.592610] usbcore: registered new interface driver pegasus
[ 3.593858] usbcore: registered new interface driver rtl8150
[ 3.594925] usbcore: registered new interface driver ax88179_178a
[ 3.596112] usbcore: registered new interface driver cdc_ether
[ 3.597225] usbcore: registered new interface driver sr9700
[ 3.598363] usbcore: registered new interface driver CoreChips
[ 3.599625] usbcore: registered new interface driver plusb
[ 3.600684] usbcore: registered new interface driver cdc_subset
[ 3.601886] usbcore: registered new interface driver kalmia
[ 3.603057] usbcore: registered new interface driver sierra_net
[ 3.604142] usbcore: registered new interface driver cx82310_eth
[ 3.605378] usbcore: registered new interface driver cdc_ncm
[ 3.606461] usbcore: registered new interface driver huawei_cdc_ncm
[ 3.607713] usbcore: registered new interface driver qmi_wwan
[ 3.609949] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.611148] ehci-pci: EHCI PCI platform driver
[ 3.612608] usbcore: registered new interface driver cdc_wdm
[ 3.613908] usbcore: registered new interface driver appledisplay
[ 3.615086] usbcore: registered new interface driver cypress_cy7c63
[ 3.616230] usbcore: registered new interface driver emi62 - firmware loader
[ 3.617697] usbcore: registered new interface driver idmouse
[ 3.618743] usbcore: registered new interface driver iowarrior
[ 3.619941] usbcore: registered new interface driver rio500
[ 3.621154] usbcore: registered new interface driver usbtest
[ 3.622201] usbcore: registered new interface driver yurex
[ 3.624692] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 3.627373] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.628210] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.632589] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 3.635219] usbcore: registered new interface driver appletouch
[ 3.636346] inport.c: Didn't find InPort mouse at 0x23c
[ 3.640633] usbcore: registered new interface driver RobotFuzz Open Source InterFace, OSIF
[ 3.642069] usbcore: registered new interface driver i2c-tiny-usb
[ 3.643017] Driver for 1-wire Dallas network protocol.
[ 3.650886] intel_powerclamp: Intel powerclamp does not run on family 15 model 6
[ 3.652248] mixcomwd: No card detected, or port not available
[ 3.653354] usbcore: registered new interface driver pcwd_usb
[ 3.654414] acquirewdt: WDT driver for Acquire single board computer initialising
[ 3.656179] acquirewdt: I/O address 0x0043 already in use
[ 3.657014] acquirewdt: probe of acquirewdt failed with error -5
[ 3.658279] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising
[ 3.660050] wafer5823wdt: initialized. timeout=60 sec (nowayout=0)
[ 3.661108] it87_wdt: no device
[ 3.661638] pc87413_wdt: Version 1.1 at io 0x2E
[ 3.662366] pc87413_wdt: cannot register miscdev on minor=130 (err=-16)
[ 3.663573] cpu5wdt: misc_register failed
[ 3.664236] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising...
[ 3.666556] smsc37b787_wdt: Unable to register miscdev on minor 130
[ 3.667562] w83977f_wdt: driver v1.00
[ 3.668170] w83977f_wdt: cannot register miscdev on minor=130 (err=-16)
[ 3.669516] sdhci: Secure Digital Host Controller Interface driver
[ 3.670579] sdhci: Copyright(c) Pierre Ossman
[ 3.671291] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 3.672193] wbsd: Copyright(c) Pierre Ossman
[ 3.673747] usbip_core: usbip_core_init:761: USB/IP Core v1.0.0
[ 3.675324] vhci_hcd: vhci_hcd_probe:1000: name vhci_hcd id -1
[ 3.676332] vhci_hcd vhci_hcd: USB/IP Virtual Host Controller
[ 3.677315] vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 1
[ 3.678425] vhci_hcd: vhci_start:883: enter vhci_start
[ 3.680733] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.681777] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.682876] usb usb1: Product: USB/IP Virtual Host Controller
[ 3.683760] usb usb1: Manufacturer: Linux 3.16.0-rc1-00011-g3b9f3f3 vhci_hcd
[ 3.684898] usb usb1: SerialNumber: vhci_hcd
[ 3.687902] hub 1-0:1.0: USB hub found
[ 3.688552] vhci_hcd: vhci_hub_control:244: typeReq a006 wValue 2900 wIndex 0
[ 3.689722] vhci_hcd: vhci_hub_control:302: GetHubDescriptor
[ 3.690659] vhci_hcd: vhci_hub_control:396: port -1
[ 3.691406] vhci_hcd: vhci_hub_control:403: bye
[ 3.692121] hub 1-0:1.0: 8 ports detected
[ 3.692807] vhci_hcd: vhci_hub_control:244: typeReq a000 wValue 0 wIndex 0
[ 3.693865] vhci_hcd: vhci_hub_control:306: GetHubStatus
[ 3.694750] vhci_hcd: vhci_hub_control:396: port -1
[ 3.695466] vhci_hcd: vhci_hub_control:403: bye
[ 3.698936] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 1
[ 3.700040] vhci_hcd: vhci_hub_control:382: SetPortFeature: default 8
[ 3.701090] vhci_hcd: vhci_hub_control:396: port 0
[ 3.701775] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100
[ 3.702997] vhci_hcd: dump_port_status_diff:115: +POWER
[ 3.703861] vhci_hcd: dump_port_status_diff:119:
[ 3.704564] vhci_hcd: vhci_hub_control:403: bye
[ 3.705324] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 2
[ 3.706433] vhci_hcd: vhci_hub_control:382: SetPortFeature: default 8
[ 3.707412] vhci_hcd: vhci_hub_control:396: port 1
[ 3.708164] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100
[ 3.709440] vhci_hcd: dump_port_status_diff:115: +POWER
[ 3.710280] vhci_hcd: dump_port_status_diff:119:
[ 3.710955] vhci_hcd: vhci_hub_control:403: bye
[ 3.711682] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 3
[ 3.712750] vhci_hcd: vhci_hub_control:382: SetPortFeature: default 8
[ 3.713711] vhci_hcd: vhci_hub_control:396: port 2
[ 3.714450] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100
[ 3.715679] vhci_hcd: dump_port_status_diff:115: +POWER
[ 3.716512] vhci_hcd: dump_port_status_diff:119:
[ 3.717227] vhci_hcd: vhci_hub_control:403: bye
[ 3.717967] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 4
[ 3.719046] vhci_hcd: vhci_hub_control:382: SetPortFeature: default 8
[ 3.720126] vhci_hcd: vhci_hub_control:396: port 3
[ 3.720895] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100
[ 3.722152] vhci_hcd: dump_port_status_diff:115: +POWER
[ 3.722925] vhci_hcd: dump_port_status_diff:119:
[ 3.723651] vhci_hcd: vhci_hub_control:403: bye
[ 3.724461] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 5
[ 3.725554] vhci_hcd: vhci_hub_control:382: SetPortFeature: default 8
[ 3.726588] vhci_hcd: vhci_hub_control:396: port 4
[ 3.727335] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100
[ 3.728574] vhci_hcd: dump_port_status_diff:115: +POWER
[ 3.729441] vhci_hcd: dump_port_status_diff:119:
[ 3.730242] vhci_hcd: vhci_hub_control:403: bye
[ 3.731009] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 6
[ 3.732048] vhci_hcd: vhci_hub_control:382: SetPortFeature: default 8
[ 3.733082] vhci_hcd: vhci_hub_control:396: port 5
[ 3.733874] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100
[ 3.735171] vhci_hcd: dump_port_status_diff:115: +POWER
[ 3.736071] vhci_hcd: dump_port_status_diff:119:
[ 3.736813] vhci_hcd: vhci_hub_control:403: bye
[ 3.737545] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 7
[ 3.738646] vhci_hcd: vhci_hub_control:382: SetPortFeature: default 8
[ 3.739690] vhci_hcd: vhci_hub_control:396: port 6
[ 3.740455] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100
[ 3.741704] vhci_hcd: dump_port_status_diff:115: +POWER
[ 3.742580] vhci_hcd: dump_port_status_diff:119:
[ 3.743359] vhci_hcd: vhci_hub_control:403: bye
[ 3.744127] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 8
[ 3.745230] vhci_hcd: vhci_hub_control:382: SetPortFeature: default 8
[ 3.746294] vhci_hcd: vhci_hub_control:396: port 7
[ 3.746992] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100
[ 3.748298] vhci_hcd: dump_port_status_diff:115: +POWER
[ 3.749146] vhci_hcd: dump_port_status_diff:119:
[ 3.749838] vhci_hcd: vhci_hub_control:403: bye
[ 3.751613] vhci_hcd: vhci_hcd_probe:1028: bye
[ 3.752345] vhci_hcd: vhci_hcd_init:1151: USB/IP 'Virtual' Host Controller (VHCI) Driver v1.0.0
[ 3.753630] beceem: Beceem Communications Inc. WiMAX driver, 5.2.45
[ 3.754606] Copyright 2010. Beceem Communications Inc
[ 3.755739] usbcore: registered new interface driver usbbcm
[ 3.757370] logger: created 256K log 'log_main'
[ 3.758658] logger: created 256K log 'log_events'
[ 3.759966] logger: created 256K log 'log_radio'
[ 3.761307] logger: created 256K log 'log_system'
[ 3.762385] usbcore: registered new interface driver gdm_wimax
[ 3.763496] usbcore: registered new interface driver cedusb
[ 3.764394] FPGA DOWNLOAD --->
[ 3.764861] FPGA image file name: xlinx_fpga_firmware.bit
[ 3.766160] GPIO INIT FAIL!!
[ 3.767617] NET: Registered protocol family 17
[ 3.768627] NET: Registered protocol family 4
[ 3.769439] 8021q: 802.1Q VLAN Support v1.8
[ 3.770269] mpls_gso: MPLS GSO support
[ 3.773326]
[ 3.773326] printing PIC contents
[ 3.774066] ... PIC IMR: ffff
[ 3.774556] ... PIC IRR: 1013
[ 3.775063] ... PIC ISR: 0000
[ 3.775552] ... PIC ELCR: 0c00
[ 3.776031] printing local APIC contents on CPU#0/0:
[ 3.776749] ... APIC ID: 00000000 (0)
[ 3.777377] ... APIC VERSION: 00050014
[ 3.777935] ... APIC TASKPRI: 00000000 (00)
[ 3.778581] ... APIC PROCPRI: 00000000
[ 3.779161] ... APIC LDR: 01000000
[ 3.779673] ... APIC DFR: ffffffff
[ 3.780143] ... APIC SPIV: 000001ff
[ 3.780143] ... APIC ISR field:
[ 3.780143] 0000000000000000000000000000000000000000000000000000000000000000
[ 3.780143] ... APIC TMR field:
[ 3.780143] 0000000002000000000000000000000000000000000000000000000000000000
[ 3.780143] ... APIC IRR field:
[ 3.780143] 0000000000000000000000000000000000000000000000000000000000008000
[ 3.780143] ... APIC ESR: 00000000
[ 3.780143] ... APIC ICR: 00000834
[ 3.780143] ... APIC ICR2: 01000000
[ 3.780143] ... APIC LVTT: 000000ef
[ 3.780143] ... APIC LVTPC: 00010000
[ 3.780143] ... APIC LVT0: 00010700
[ 3.780143] ... APIC LVT1: 00000400
[ 3.780143] ... APIC LVTERR: 000000fe
[ 3.780143] ... APIC TMICT: 0009650a
[ 3.780143] ... APIC TMCCT: 00000000
[ 3.780143] ... APIC TDCR: 00000003
[ 3.780143]
[ 3.792236] number of MP IRQ sources: 15.
[ 3.792822] number of IO-APIC #0 registers: 24.
[ 3.793548] testing the IO APIC.......................
[ 3.794396] IO APIC #0......
[ 3.794820] .... register #00: 00000000
[ 3.795407] ....... : physical APIC id: 00
[ 3.796110] ....... : Delivery Type: 0
[ 3.796732] ....... : LTS : 0
[ 3.797360] .... register #01: 00170011
[ 3.797913] ....... : max redirection entries: 17
[ 3.798680] ....... : PRQ implemented: 0
[ 3.799364] ....... : IO APIC version: 11
[ 3.800072] .... register #02: 00000000
[ 3.800635] ....... : arbitration: 00
[ 3.801252] .... IRQ redirection table:
[ 3.801856] 1 0 0 0 0 0 0 00
[ 3.802544] 0 0 0 0 0 1 1 31
[ 3.803259] 0 0 0 0 0 1 1 30
[ 3.803959] 0 0 0 0 0 1 1 33
[ 3.804706] 0 0 0 0 0 1 1 34
[ 3.805454] 1 1 0 0 0 1 1 35
[ 3.806211] 0 0 0 0 0 1 1 36
[ 3.806933] 0 0 0 0 0 1 1 37
[ 3.807682] 0 0 0 0 0 1 1 38
[ 3.808384] 0 1 0 0 0 1 1 39
[ 3.809109] 1 1 0 0 0 1 1 3A
[ 3.809776] 1 1 0 0 0 1 1 3B
[ 3.810517] 0 0 0 0 0 1 1 3C
[ 3.811230] 0 0 0 0 0 1 1 3D
[ 3.811946] 0 0 0 0 0 1 1 3E
[ 3.812670] 0 0 0 0 0 1 1 3F
[ 3.813394] 1 0 0 0 0 0 0 00
[ 3.814118] 1 0 0 0 0 0 0 00
[ 3.814887] 1 0 0 0 0 0 0 00
[ 3.815582] 1 0 0 0 0 0 0 00
[ 3.816292] 1 0 0 0 0 0 0 00
[ 3.816987] 1 0 0 0 0 0 0 00
[ 3.817698] 1 0 0 0 0 0 0 00
[ 3.818415] 1 0 0 0 0 0 0 00
[ 3.819139] IRQ to pin mappings:
[ 3.819636] IRQ0 -> 0:2
[ 3.820127] IRQ1 -> 0:1
[ 3.820566] IRQ3 -> 0:3
[ 3.821006] IRQ4 -> 0:4
[ 3.821439] IRQ5 -> 0:5
[ 3.821862] IRQ6 -> 0:6
[ 3.822321] IRQ7 -> 0:7
[ 3.822725] IRQ8 -> 0:8
[ 3.823158] IRQ9 -> 0:9
[ 3.823608] IRQ10 -> 0:10
[ 3.824084] IRQ11 -> 0:11
[ 3.824534] IRQ12 -> 0:12
[ 3.824987] IRQ13 -> 0:13
[ 3.825440] IRQ14 -> 0:14
[ 3.825884] IRQ15 -> 0:15
[ 3.826336] .................................... done.
[ 3.827127] Using IPI Shortcut mode
[ 3.829238] Loading compiled-in X.509 certificates
[ 3.835932] Loaded X.509 cert 'Magrathea: Glacier signing key: 82b545993de96d1d544e1edf008aafeb6b50785c'
[ 3.837453] registered taskstats version 1
[ 3.839401] Magic number: 2:598:772
[ 3.840113] tty ptyp8: hash matches
[ 3.840734] console [netcon0] enabled
[ 3.841290] netconsole: network logging started
[ 3.842140] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 3.843930] PM: Hibernation image not present or could not be loaded_______________________________________________
LKP mailing list
LKP@xxxxxxxxxxxxxxx