Re: USB_MUSB_DA8XX with g_multi.ko

[Andrzej Pietrasiewicz]

W dniu 25.06.2014 17:13, Jon Ringle pisze:
> In commit 787f5627bec80094db487bfcb401e9744f181aed
> usb: musb: make davinci and da8xx glues depend on BROKEN
>
> USB_MUSB_DA8XX was marked as BROKEN
>
> A few months ago, we updated the linux kernel on our AM1808 SoC based
> embedded board from Linux 2.6.33 to the latest long term 3.12.
>
> I am interested in having the USB gadget support on my board, so I
> removed BROKEN on USB_MUSB_DA8XX. I found that when I modprobe
> g_ether, g_serial, and g_mass_storage (by themselves), they all appear
> to work as expected, but if I try to use g_multi to have a composite
> device supporting all three simultaneously, I run into failure during
> initialization.

<snip>

> > From this I can see that it's failing on the following call in fsg_bind():
> ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);

Just a random guess (I don't know your hardware): how many bulk,
iso and interrupt endpoints does your hardware provide? Perhaps you
just run out of endpoints?

AP

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/