Re: [PATCH v3 02/14] mfd: max77686: Allow the max77686 rtc to wakeup the system
From: Javier Martinez Canillas
Date: Wed Jun 25 2014 - 14:11:24 EST
On 06/25/2014 07:24 PM, Doug Anderson wrote:
> Hi,
>
> On Wed, Jun 25, 2014 at 3:29 AM, Javier Martinez Canillas
> <javier.martinez@xxxxxxxxxxxxxxx> wrote:
>> Yes, the original Chrome OS 3.8 max77xxx also called the irq worker thread to
>> ack the interrupt.
>>
>> So the real problem is that an interrupt occurs before the I2C bus controller is
>> resumed and so the interrupt handler is not able to access the registers over I2C.
>>
>> Doug posted the following patches [0,1] that AFAIU solves the issue by making
>> I2C controllers to be resumed in the noirq time to ensure that drivers will be
>> able to use the I2C bus to handler their wakeup.
>
> Yup, that's the solution as far as I know. I know that in ChromeOS we
> still have the extra call to the worker thread (despite the controller
> waking up early), but that might be related to some other problem?
>
> I was able to successfully suspend/resume multiple times once I woke
> the i2c controller up earlier.
>
> If you feel like adding Reviewed-by / Tested-by to my i2c patch then
> feel free! ;)
>
>
Done :)
>> In fact, Doug's original patch had this as a part of the commit message:
>>
>> NOTE: due to wakeup ordering problems this patch alone doesn't work so
>> well on exynos5250-snow. You also need something that brings the i2c
>> bus up before the max77686 wakeup runs.
>>
>> I removed that note since I (probably wrong) thought that he didn't mean it to
>> be part of the commit message but just was side information.
>
> I probably would have left that in the patch, but I'm not objecting to
> you taking it out. :)
>
Yes, I should had left that as well. I'll send a v4 shortly and will include the
note again.
Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/