[PATCH v4 02/14] mfd: max77686: Allow the max77686 rtc to wakeup the system

[Javier Martinez Canillas]

From: Doug Anderson <dianders@xxxxxxxxxxxx>

The max77686 includes an RTC that keeps power during suspend.  It's
convenient to be able to use it as a wakeup source.

NOTE: due to wakeup ordering problems this patch alone doesn't work so
well on exynos5250-snow.  You also need something that brings the i2c
bus up before the max77686 wakeup runs.

Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
Reviewed-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
---

Changes since v3:
 - Keep the note that this patch needs another change due wakeup
   ordering problems.

 drivers/rtc/rtc-max77686.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
index d20a7f0..c1c6055 100644
--- a/drivers/rtc/rtc-max77686.c
+++ b/drivers/rtc/rtc-max77686.c
@@ -583,6 +583,33 @@ static void max77686_rtc_shutdown(struct platform_device *pdev)
 #endif /* MAX77686_RTC_WTSR_SMPL */
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int max77686_rtc_suspend(struct device *dev)
+{
+	if (device_may_wakeup(dev)) {
+		struct max77686_rtc_info *info = dev_get_drvdata(dev);
+
+		return enable_irq_wake(info->virq);
+	}
+
+	return 0;
+}
+
+static int max77686_rtc_resume(struct device *dev)
+{
+	if (device_may_wakeup(dev)) {
+		struct max77686_rtc_info *info = dev_get_drvdata(dev);
+
+		return disable_irq_wake(info->virq);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(max77686_rtc_pm_ops,
+			 max77686_rtc_suspend, max77686_rtc_resume);
+
 static const struct platform_device_id rtc_id[] = {
 	{ "max77686-rtc", 0 },
 	{},
@@ -592,6 +619,7 @@ static struct platform_driver max77686_rtc_driver = {
 	.driver		= {
 		.name	= "max77686-rtc",
 		.owner	= THIS_MODULE,
+		.pm	= &max77686_rtc_pm_ops,
 	},
 	.probe		= max77686_rtc_probe,
 	.shutdown	= max77686_rtc_shutdown,
-- 
2.0.0.rc2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/