Re: [PATCH v5 10/14] regulator: Add driver for Maxim 77802 PMIC regulators

[Lee Jones]

On Thu, 26 Jun 2014, Javier Martinez Canillas wrote:
> The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout
> (LDO) regulators. This patch adds support for all these regulators
> found on the MAX77802 PMIC and is based on a driver added by Simon
> Glass to the Chrome OS kernel 3.8 tree.
> 
> Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
> Tested-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
> ---
> 
> Changes since v4: None
> 
> Changes since v3:
>  - Set the supply_name for regulators to lookup their parent supply node.
>    Suggested by Mark Brown.
>  - Change Exyno5 for Exynos5420/Exynos5800 in regulator driver Kconfig.
>    Suggested by Doug Anderson.
> 
> Changes since v2:
>  - Use dev_warn() instead pr_warn(). Suggested by Mark Brown.
>  - Add a generic function to regmap core to copy registers instead of
>    having a driver-specific function. Suggested by Mark Brown.
>  - Remove unnecessary probe debug log. Suggested by Mark Brown.
>  - Set struct regulator_config dev field to MFD instead of the platform dev.
>    Suggested by Mark Brown.
>  - Read the regulators operational mode from the hardware registers instead
>    of setting to normal as default on probe. Suggested by Mark Brown.
>  - Remove unnecessary cross-subsystem dependencies. Suggested by Lee Jones.
> 
> Changes since v1:
>  - Remove unneeded check if num_regulators != MAX77802_MAX_REGULATORS.
>  - Fix .set_suspend_mode handler comment and split regulators ops for
>    regulators that behave differently. Suggested by Mark Brown.
>  - Use module_platform_driver() instead of having init/exit functions.
>    Suggested by Mark Brown.
>  - Use the new descriptor-based GPIO interface instead of the deprecated
>    integer based GPIO one. Suggested by Mark Brown.
>  - Look for "regulators" child node instead of "voltage-regulators" to be
>    consistent with other PMIC drivers. Suggested by Mark Brown.
> 
>  drivers/mfd/max77802.c               |   8 +-
>  drivers/regulator/Kconfig            |   9 +
>  drivers/regulator/Makefile           |   1 +
>  drivers/regulator/max77802.c         | 694 +++++++++++++++++++++++++++++++++++
>  include/linux/mfd/max77802-private.h |   3 -
>  5 files changed, 711 insertions(+), 4 deletions(-)
>  create mode 100644 drivers/regulator/max77802.c
> 
> diff --git a/drivers/mfd/max77802.c b/drivers/mfd/max77802.c
> index 3d477fb..79d36b6 100644
> --- a/drivers/mfd/max77802.c
> +++ b/drivers/mfd/max77802.c
> @@ -228,7 +228,7 @@ static int max77802_i2c_probe(struct i2c_client *i2c,
>  
>  	max77802 = devm_kzalloc(&i2c->dev, sizeof(struct max77802_dev),
>  				GFP_KERNEL);
> -	if (max77802 == NULL)
> +	if (!max77802)
>  		return -ENOMEM;
>  
>  	i2c_set_clientdata(i2c, max77802);
> @@ -315,6 +315,12 @@ static int max77802_suspend(struct device *dev)
>  	if (device_may_wakeup(dev))
>  		enable_irq_wake(max77802->irq);
>  
> +	/*
> +	 * The IRQ must be disabled during suspend since due wakeup
> +	 * ordering issues it may be possible that the I2C controller
> +	 * is still suspended when the interrupt happens so the IRQ
> +	 * handler will fail to read the I2C bus.
> +	 */

Please re-word this, the English is a little off.

>  	disable_irq(max77802->irq);
>  
>  	return 0;

Please separate the MFD changes out.  There is no need for them to be
munged in with regulator changes.

[...]

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/