[PATCH v2 01/14] clk: st: Update ST clock binding documentation
From: Gabriel FERNANDEZ
Date: Fri Jun 27 2014 - 09:27:16 EST
This patch adds new compatibilities to support STiH407 SoC.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@xxxxxxxxxx>
Acked-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
---
.../bindings/clock/st/st,clkgen-divmux.txt | 28 +++++------
.../devicetree/bindings/clock/st/st,clkgen-mux.txt | 6 +--
.../devicetree/bindings/clock/st/st,clkgen-pll.txt | 17 ++++---
.../bindings/clock/st/st,clkgen-prediv.txt | 8 ++--
.../devicetree/bindings/clock/st/st,clkgen-vcc.txt | 34 ++++++++------
.../devicetree/bindings/clock/st/st,clkgen.txt | 54 +++++++++++++---------
.../devicetree/bindings/clock/st/st,quadfs.txt | 15 +++---
7 files changed, 94 insertions(+), 68 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt
index ae56315..6247652 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt
@@ -24,26 +24,26 @@ Required properties:
Example:
- clockgenA@fd345000 {
+ clockgen-a@fd345000 {
reg = <0xfd345000 0xb50>;
- CLK_M_A1_DIV1: CLK_M_A1_DIV1 {
+ clk_m_a1_div1: clk-m-a1-div1 {
#clock-cells = <1>;
compatible = "st,clkgena-divmux-c32-odf1",
"st,clkgena-divmux";
- clocks = <&CLK_M_A1_OSC_PREDIV>,
- <&CLK_M_A1_PLL0 1>, /* PLL0 PHI1 */
- <&CLK_M_A1_PLL1 1>; /* PLL1 PHI1 */
-
- clock-output-names = "CLK_M_RX_ICN_TS",
- "CLK_M_RX_ICN_VDP_0",
- "", /* Unused */
- "CLK_M_PRV_T1_BUS",
- "CLK_M_ICN_REG_12",
- "CLK_M_ICN_REG_10",
- "", /* Unused */
- "CLK_M_ICN_ST231";
+ clocks = <&clk_m_a1_osc_prediv>,
+ <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
+ <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
+
+ clock-output-names = "clk-m-rx-icn-ts",
+ "clk-m-rx-icn-vdp-0",
+ "", /* unused */
+ "clk-m-prv-t1-bus",
+ "clk-m-icn-reg-12",
+ "clk-m-icn-reg-10",
+ "", /* unused */
+ "clk-m-icn-st231";
};
};
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
index 943e080..f1fa91c 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
@@ -17,7 +17,7 @@ Required properties:
"st,stih416-clkgenf-vcc-sd", "st,clkgen-mux"
"st,stih415-clkgen-a9-mux", "st,clkgen-mux"
"st,stih416-clkgen-a9-mux", "st,clkgen-mux"
-
+ "st,stih407-clkgen-a9-mux", "st,clkgen-mux"
- #clock-cells : from common clock binding; shall be set to 0.
@@ -27,10 +27,10 @@ Required properties:
Example:
- CLK_M_HVA: CLK_M_HVA {
+ clk_m_hva: clk-m-hva@fd690868 {
#clock-cells = <0>;
compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
reg = <0xfd690868 4>;
- clocks = <&CLOCKGEN_F 1>, <&CLK_M_A1_DIV0 3>;
+ clocks = <&clockgen_f 1>, <&clk_m_a1_div0 3>;
};
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
index 81eb385..efb51cf 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -19,11 +19,14 @@ Required properties:
"st,stih415-plls-c32-ddr", "st,clkgen-plls-c32"
"st,stih416-plls-c32-a9", "st,clkgen-plls-c32"
"st,stih416-plls-c32-ddr", "st,clkgen-plls-c32"
+ "st,stih407-plls-c32-a0", "st,clkgen-plls-c32"
+ "st,stih407-plls-c32-a9", "st,clkgen-plls-c32"
+ "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32"
+ "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32"
"st,stih415-gpu-pll-c32", "st,clkgengpu-pll-c32"
"st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32"
-
- #clock-cells : From common clock binding; shall be set to 1.
- clocks : From common clock binding
@@ -32,17 +35,17 @@ Required properties:
Example:
- clockgenA@fee62000 {
+ clockgen-a@fee62000 {
reg = <0xfee62000 0xb48>;
- CLK_S_A0_PLL: CLK_S_A0_PLL {
+ clk_s_a0_pll: clk-s-a0-pll {
#clock-cells = <1>;
compatible = "st,clkgena-plls-c65";
- clocks = <&CLK_SYSIN>;
+ clocks = <&clk_sysin>;
- clock-output-names = "CLK_S_A0_PLL0_HS",
- "CLK_S_A0_PLL0_LS",
- "CLK_S_A0_PLL1";
+ clock-output-names = "clk-s-a0-pll0-hs",
+ "clk-s-a0-pll0-ls",
+ "clk-s-a0-pll1";
};
};
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt
index 566c9d7..604766c 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt
@@ -20,17 +20,17 @@ Required properties:
Example:
- clockgenA@fd345000 {
+ clockgen-a@fd345000 {
reg = <0xfd345000 0xb50>;
- CLK_M_A2_OSC_PREDIV: CLK_M_A2_OSC_PREDIV {
+ clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
#clock-cells = <0>;
compatible = "st,clkgena-prediv-c32",
"st,clkgena-prediv";
- clocks = <&CLK_SYSIN>;
+ clocks = <&clk_sysin>;
- clock-output-names = "CLK_M_A2_OSC_PREDIV";
+ clock-output-names = "clk-m-a2-osc-prediv";
};
};
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
index 4e3ff28..109b3ed 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
@@ -32,22 +32,30 @@ Required properties:
Example:
- CLOCKGEN_C_VCC: CLOCKGEN_C_VCC {
+ clockgen_c_vcc: clockgen-c-vcc@0xfe8308ac {
#clock-cells = <1>;
compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
reg = <0xfe8308ac 12>;
- clocks = <&CLK_S_VCC_HD>, <&CLOCKGEN_C 1>,
- <&CLK_S_TMDS_FROMPHY>, <&CLOCKGEN_C 2>;
-
- clock-output-names =
- "CLK_S_PIX_HDMI", "CLK_S_PIX_DVO",
- "CLK_S_OUT_DVO", "CLK_S_PIX_HD",
- "CLK_S_HDDAC", "CLK_S_DENC",
- "CLK_S_SDDAC", "CLK_S_PIX_MAIN",
- "CLK_S_PIX_AUX", "CLK_S_STFE_FRC_0",
- "CLK_S_REF_MCRU", "CLK_S_SLAVE_MCRU",
- "CLK_S_TMDS_HDMI", "CLK_S_HDMI_REJECT_PLL",
- "CLK_S_THSENS";
+ clocks = <&clk_s_vcc_hd>,
+ <&clockgen_c 1>,
+ <&clk_s_tmds_fromphy>,
+ <&clockgen_c 2>;
+
+ clock-output-names = "clk-s-pix-hdmi",
+ "clk-s-pix-dvo",
+ "clk-s-out-dvo",
+ "clk-s-pix-hd",
+ "clk-s-hddac",
+ "clk-s-denc",
+ "clk-s-sddac",
+ "clk-s-pix-main",
+ "clk-s-pix-aux",
+ "clk-s-stfe-frc-0",
+ "clk-s-ref-mcru",
+ "clk-s-slave-mcru",
+ "clk-s-tmds-hdmi",
+ "clk-s-hdmi-reject-pll",
+ "clk-s-thsens";
};
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
index 49ec5ae..427bad8 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -24,60 +24,72 @@ address is common of all subnode.
quadfs_node {
...
};
+
+ mux_node {
+ ...
+ };
+
+ vcc_node {
+ ...
+ };
...
};
This binding uses the common clock binding[1].
-Each subnode should use the binding discribe in [2]..[4]
+Each subnode should use the binding discribe in [2]..[7]
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st,quadfs.txt
-[3] Documentation/devicetree/bindings/clock/st,quadfs.txt
-[4] Documentation/devicetree/bindings/clock/st,quadfs.txt
+[2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt
+[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
+[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
+[5] Documentation/devicetree/bindings/clock/st,clkgen-prediv.txt
+[6] Documentation/devicetree/bindings/clock/st,vcc.txt
+[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
+
Required properties:
- reg : A Base address and length of the register set.
Example:
- clockgenA@fee62000 {
+ clockgen-a@fee62000 {
reg = <0xfee62000 0xb48>;
- CLK_S_A0_PLL: CLK_S_A0_PLL {
+ clk_s_a0_pll: clk-s-a0-pll {
#clock-cells = <1>;
compatible = "st,clkgena-plls-c65";
- clocks = <&CLK_SYSIN>;
+ clocks = <&clk-sysin>;
- clock-output-names = "CLK_S_A0_PLL0_HS",
- "CLK_S_A0_PLL0_LS",
- "CLK_S_A0_PLL1";
+ clock-output-names = "clk-s-a0-pll0-hs",
+ "clk-s-a0-pll0-ls",
+ "clk-s-a0-pll1";
};
- CLK_S_A0_OSC_PREDIV: CLK_S_A0_OSC_PREDIV {
+ clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
#clock-cells = <0>;
compatible = "st,clkgena-prediv-c65",
"st,clkgena-prediv";
- clocks = <&CLK_SYSIN>;
+ clocks = <&clk_sysin>;
- clock-output-names = "CLK_S_A0_OSC_PREDIV";
+ clock-output-names = "clk-s-a0-osc-prediv";
};
- CLK_S_A0_HS: CLK_S_A0_HS {
+ clk_s_a0_hs: clk-s-a0-hs {
#clock-cells = <1>;
compatible = "st,clkgena-divmux-c65-hs",
"st,clkgena-divmux";
- clocks = <&CLK_S_A0_OSC_PREDIV>,
- <&CLK_S_A0_PLL 0>, /* PLL0 HS */
- <&CLK_S_A0_PLL 2>; /* PLL1 */
+ clocks = <&clk-s_a0_osc_prediv>,
+ <&clk-s_a0_pll 0>, /* pll0 hs */
+ <&clk-s_a0_pll 2>; /* pll1 */
- clock-output-names = "CLK_S_FDMA_0",
- "CLK_S_FDMA_1",
- ""; /* CLK_S_JIT_SENSE */
- /* Fourth output unused */
+ clock-output-names = "clk-s-fdma-0",
+ "clk-s-fdma-1",
+ ""; /* clk-s-jit-sense */
+ /* fourth output unused */
};
};
diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
index ec86d62..cedeb9c 100644
--- a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
@@ -15,6 +15,9 @@ Required properties:
"st,stih416-quadfs432", "st,quadfs"
"st,stih416-quadfs660-E", "st,quadfs"
"st,stih416-quadfs660-F", "st,quadfs"
+ "st,stih407-quadfs660-C", "st,quadfs"
+ "st,stih407-quadfs660-D", "st,quadfs"
+
- #clock-cells : from common clock binding; shall be set to 1.
@@ -32,14 +35,14 @@ Required properties:
Example:
- CLOCKGEN_E: CLOCKGEN_E {
+ clockgen_e: clockgen-e@fd3208bc {
#clock-cells = <1>;
compatible = "st,stih416-quadfs660-E", "st,quadfs";
reg = <0xfd3208bc 0xB0>;
- clocks = <&CLK_SYSIN>;
- clock-output-names = "CLK_M_PIX_MDTP_0",
- "CLK_M_PIX_MDTP_1",
- "CLK_M_PIX_MDTP_2",
- "CLK_M_MPELPC";
+ clocks = <&clk_sysin>;
+ clock-output-names = "clk-m-pix-mdtp-0",
+ "clk-m-pix-mdtp-1",
+ "clk-m-pix-mdtp-2",
+ "clk-m-mpelpc";
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/