Re: [PATCH v2 1/2] usb: chipidea: zynq: Add device tree binding information

[punnaiah choudary kalluri]

On Fri, Jun 27, 2014 at 5:53 PM, Sergei Shtylyov
<sergei.shtylyov@xxxxxxxxxxxxxxxxxx> wrote:
> Hello.
>
>
> On 06/27/2014 03:23 PM, Punnaiah Choudary Kalluri wrote:
>
>> Document device tree binding information as required by
>> the ZYNQ USB controller.
>
>
>> Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xxxxxxxxxx>
>
> [...]
>
>
>> diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-zynq.txt
>> b/Documentation/devicetree/bindings/usb/ci-hdrc-zynq.txt
>> new file mode 100644
>> index 0000000..54bb3b4
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-zynq.txt
>> @@ -0,0 +1,23 @@
>> +Xilinx Zynq usb controller based on synopsys usb IP(v2.20a)
>
>
>    s/usb/USB/.

OK

>
>
>> +
>> +Required properties:
>> +- compatible:   should contain "xlnx,zynq-usb-2.20a"
>> +- clocks:       clock provider specifier
>> +- reg:          offset and length of the register set in the memory map
>> +- interrupt-parent: the phandle for the interrupt controller that
>> services
>> +                    interrupts for this device.
>
>
>    This property has never been required -- it can be inherited from the
> upper level node.

OK. i will correct it.

Thanks,
Punnaiah

>
> WBR, Sergei
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/